rocstor Y10G008-B1 TrueReach HDMI Extender User Manual

TrueReach
HDMI™ EXTENDER
Point to Point Extender
User Manual Y10G008-B1

Important Safety Notice

1. Please power off the transmitter and receiver before installation.
2. Do not disassemble the devices for any repair. Do not open the devices during operations to avoid any electric shock.
3. Please turn off the power before installation. Live installation may damage the equipment.
4. Do not expose the devices to rain, moisture and liquid.
5. Use a 5V/500mA DC adapter only. Make sure the specification matches the original power adapter if using 3rd party DC adapters.

Introduction

The Rocstor TrueReach HDMI Extender includes a transmitter unit and a receiver unit.
It allows the HDMI signal to be transmitted up to 230 ft (70m) at 1080p resolution using a Cat6/6A/7 network cable. It features a point-to-point connection configuration, and supports IR pass-back. It is perfect for outdoor advertising, monitor system, home entertainment, conference, and more.

Features

• Zero latency.
• Supports up to 4K@30Hz resolution.
• Supports CAT6/6A/7 network cables, 1080p@60Hz transmission distance is up to 230 ft (70m) , 4K@30Hz transmission distance is up to 131 ft (40m).
• Supports IR pass-back function (20～60KHz).
• Supports HDR10.
• Supports EDID pass-through.
• Audio formats supported: PCM, LPCM, DTS HD, DTS Audio
• Automatically adjusts parameters to match different network cables and achieve the best display performance.
• Lightning Protection, Surge Protection, ESD Protection.

Package Contents

| |
---|---|---
Transmitterunitx 1pc| Receiverunitx 1pc| DC5V/500mA x2pcs
| |
Userm anualxlpc| IR blaster extension cable xlpc| IR receiver extension cable xlpc

Installation Requirements

1. HDMI source device (compute graphics card, DVD, PS4, HD monitoring equipment etc.)
2. HDMI display devices like SDTV, HDTV, projector with HDMI port.
3. UTP/STP CAT6/6A/7 cable, follow standard IEEE-568B, it is recommended to select a network cable with less loss and crosstalk .

Interfaces

Transmitter (TX)

0   0   @  .

transmitter as close as possible to the signal source device when using.
4| Resetb utton| Press the button to restart the device.
5| Rj45s ignalo utput| Output modulated HDMI signal.
6| Signal Indicator| NoH HDM DMI signal istransmitted, the indicatof flashes.
HDMI signal istransmitted, the indicator ndicator stayson.

control used is within the range of the IR receiving device .
4| Resetb utton| Press the button to restart the device.
5| Rj45s ignalo utput| Inputm odulated HDMI signal.
6| Signal Indicator| NoH HDM DMI signal istransmitted, the indicatof flashes.
HDMI signal istransmitted, the indicator ndicator stayson.

Contact Information

Corporate Headquarters
12979 Arroyo Ave
San Fernando, CA 91340 – USA
Office: +1 818-727-7000
Fax: +1 818-875-0002
Email: info@Rocstor.com
Technical Support / RMA
Hours: 9:00 am – 5:00 pm PST
Mon – Fri (excluding holidays)
Tell: +1 818-727-7000 (DOM/INTL)
Fax: +1 818-875-0002
Email: support@Rocstor.com
Sales Info
Hours: 8:00 am – 5:00 pm PST
Mon – Fri (excluding holidays)
Tell: +1 818-727-7000 (DOM/INTL)
Fax: +1 818-875-0002
Email: support@Rocstor.com
Corporate, Government and Academic Customers
Our Corporate Sales Team’s goal is to help our U.S.A. and Canadian customers find a storage solution that best serves their needs. We will help you determine your best purchasing options. For more information please contact the appropriate department below or call us at +1 818-727-7000.
General sales information: sales@Rocstor.com
Corporate sales information: corporate_sales@Rocstor.com
Educational sales information: academic_sales@Rocstor.com
Federal, State & Local government sales information: government_sales@Rocstor.com
Resellers/Business Development/OEM Partners
All Channel National and International Resellers, VARs, Consultants …
contact Rocstor Channel Sales:
call: +1 818-727-7000
Email: reseller_info@Rocstor.com

Disclaimer

©2023 Rocstroge, Inc. Rocstor is registered trademark of Rocstorage, Inc. The terms HDMI, HDMI High-Denition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
The product name and brand name may be registered trademark of related manufactures. ™ and ® may be omitted on the user manual. The pictures in this user manual are just for reference. We reserve the rights to make changes without further notice to a product or system described herein to improve reliability, function or design.

Installation Procedures

1. The network cable should follow the standard of IEEE-568B. It is recommended to select a network cable with less loss and crosstalk.
   1-Orange/white
   2-Orange
   3-Green/white
   4-Blue
   5-Blue/white
   6-Green
   7-Brown/white
   8-Brown

2. Connection
   

3. Connection instruction

1. Connect the HDMI port of the source device to the HDMI IN port of the transmitter via an HDMI cable.
2. Connect the CAT6 OUT port of the transmitter and the CAT6 IN port of the receiver via a network cable.
3. Connect the HDMI port of the display device to the HDMI OUT port of the receiver via an HDMI cable.
4. Connect the IR blaster extension cable to the IR OUT port of the transmitter, connect the IR receiver extension cable to the IR IN port of the receiver.
5. Plug the power into the devices to get started.

FAQ

Q：Why there is no image/image or sound is not played smoothly?

A：Press the “RESET” button of the receiver to restart the device. Reconnect the devices with a shorter network cable

Q：Why does the signal indicator “LINK” always flashes? ：）

A：1. Check whether the network cable is uses IEEE-568B wiring standards. 2. Check whether the source device and the transmitter are connected well. 3. Reset the transmitter or receiver and connect it again.

Q：Why does the receiver ‘s signal indicator ”LINK” stays on but there is no image output?

A：1. Press the “RESET” button of the receiver to restart the device. 2. Check whether the display device and the receiver are connected well. 3. Reconnect the network cable or re-power the receiver.

Specification

1680×1050, 1920×1080, 480i@ 60Hz, 480p@ 60Hz, 576i@ 50Hz, 576p@ 50Hz, 720p@ 50/60Hz, 1080i@ 50/60Hz,
1 080p@ 24/25/30/50/60Hz, 3840×2160@ 24/25/30Hz
A udiof ormats| DTS, D TS-HD, PCM, LPCM
H DR| Suppor t
EDID t hrough| Suppor t
1RP ass-back| Frequency Range : 20-60KHz
Input and output TMDS signal| 0.7— 1.2Vp-p(TM OS)
Input and output DDC signal| SVp-p(TTL)
Transmission Distance| Cat6/6A/7| 1080p@ 60Hzt ransmission 7 Om eters
4K@ 30Hzt ransmission4 0 rn eters
Protection Level| Electrostatic p rotectionof thew holem achine| Implementation of the standard: IEC61000-4-2
la Contact discharge level 2 (±4KV)
lb Air discharge level 3 (±8KV)
Operating Environment| Working t emperature| -20-60
Storage temperature| -30-70
Humidity( noc ondensation)| 0^-90%RH
Body Properties| Dimension| 71.6(W)x6 6.6(D)x2 4.8(H) m m
Weight| TX: 85g RX:85g
Color| Black

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>