iENYRID ES10 Electric Scooter User Manual
- June 12, 2024
- iENYRID
Table of Contents
iENYRID ES10 Electric Scooter User Manual
Note: Please readthe user manual before use
Cautions:
- Please look forthe iENYRID brand when purchasing
- If you encounter damage or loss during transportation please contact customer service within 7 days.
- iENYRID is not responsible forthe loss caused by improper personal operation or unauthorized modification as required.
- After-sales maintenance is required, please strictly abide by the warranty regulations, fill in the warranty card, and send it back to our maintenance warehouse together with the product.
- Do not use a high-pressure water gun to wash the electric scooter, so as to avoid short circuit of the internal circuit.
- Before traveling, you should check whether thetirepressure is sufficient.
- Obey traffic rules and drive civilized.
- E-mail:[email protected]
Product introduction
Parts
Please carefully check whether the items in the packing box are complete and intact If there is any problem such as missing or damaged, please contact online customer service.
-
Tool Kit
-
Charger
Functional diagram
Safety instructions
When encountering deceleration belts, potholes and other unusual roads Do not pass at high speed. Bend your knees slightly to better adapt The above complex pavement.
It is forbidden for more than one person to drive an electricscooterat the
sametime or with children.
Do not accelerate when going downhill, and brake in time to slow down when you
encounter a steep slope, you need to get out of the car and push through. Do
not ride at risk.
If you encounter a steep slope when going uphill, do not speed up get off and
push through, and do not ride at risk.
Product assembly
-
Open the carton and take out the product
-
Straighten the frame and fixthe buckle.
-
Adjust the appropriate height Fixing buckle.
-
Vertical base pipe fixing buckle.
-
. Install the seat bag and fix the folding buckle
-
Start with key
Learn to drive
-
Please wear head thieves, elbow pads and knee pads. Please read this manual carefully before use.
-
Start up and test LCD Meter and power status.
-
Turn the knob to open the accelerator and start riding Slow down by releasing the throttle
-
Gently hold the brake handle to slow down, Hold the brake handle tightly for emergency braking.
-
Triple lighting system, move the red button up and down Three lighting modes can be adjusted
-
L and H two gear speeds, yellow button for left and right adjustment, Green button switch