iENYRID iE-YF001 Belt Motor off Road Skateboard User Manual

iENYRID iE-YF001 Belt Motor off Road Skateboard

Product Information

• Product Name: Belt Motor Off-Road Skateboard
• Model: iE-Y F0 0 1
• Size: 60x105mm
• Parts Included: Front wheel, Front Truck, Deck, Battery indicator, Charge port, Heat sink hole, Charge interface, A belt cover, Hub motor wheel, Battery case
• Deck Material: 8 Layers Maple + 2 Layers bamboo
• Deck Length: 1100mm
• Battery Pack Capacity: 10000mAh Lithium 10S5P
• Battery Pack Weight: 2.5G
• Charge Time: 6 hours
• Motor Type: Dual-motor 1650W*2
• Wheel Type: Pneumatic tire 9inch
• Wireless Remote Controller Size: 200mAh
• Wireless Remote Controller Capacity: 14M
• Max Speed: 40KM/H
• Max Mileage: 20KM
• Max Load: 200KG
• Gross Weight: 18.5KG
• Net Weight: 14KG
• Product Size: 1170460240mm
• Packaging Size: 1220485290mm

Product Usage Instructions

1. Ensure that you wear a helmet and safety gear before riding.
2. Confirm the front direction of the skateboard.
3. Position your feet on the widest front and back parts of the skateboard.
4. Start with the low-speed mode to familiarize yourself with the acceleration and brake.
5. Stop riding by using the remote control brake operation. First, get down your front foot, and then get down your back foot.
6. Pairing the Board and Remote:
   • Make sure both the Board and Remote are turned off.
   • Turn on the Board by pressing the power button for 5 seconds until the power button light flashes.
   • Turn on the Remote and press the pair button. The signal indicator and power button light will flash with the same frequency, indicating a successful pairing.
7. Test the acceleration and brake by pushing the joystick forward and backward respectively. Ensure all functions work normally before starting your ride.
8. Only one person should ride the skateboard at a time.
9. The skateboard is designed for riders over 10 years old and above.
10. The maximum load of the board is 150kg. Do not exceed this weight to avoid compromising the structural integrity of the skateboard and potential damages or accidents.
11. Always ride in a safe and appropriate environment, and wear appropriate safety gear such as a skateboard helmet, elbow pads, knee pads, and gloves.
12. Avoid wearing loose footwear like flip-flops while riding.

PREPARATION

1. Be sure that wear a helmet and safty gear when you ride it
2. Confirm the front direction of the skateboard
3. Confirm the position on the skateboard, The feet stand on the widest front and back skateboard.
4. Please start with the low speed mode to be familiar with the accelerate and brake of the skateboard.
5. Please stop riding by remote  control brake operation,then getdown your front foot at first and then get down your back foot.

PARTS DIAGRAM

1. Front wheel
2. Front Truck
3. Deck
4. Battery indicator
5. Charge port
6. Charge interface
7. Heat sink hole
8. Hub motor wheel
9. A belt cover
10. Battery case

REMOTE CONTROL

PAIR INSTRUCTION

At the first step, the Board and Remote must be paired. Before starting, to ensure the Board and Remote are turn off.

Turn on the board Press the power button for 5 seconds, then the power button light will flash. Turn on the remote,then press the pair button. the signal indicator will flash and the power button light will flash with same frequence. Then means the paired  successfully. Push the joystick, forward to test the accelarate andbackward to test the brake. After tested all function work normal you can start your riding.

SPECIFICATION

SAFETY INSTRUCTIONS

• The electric skateboard is not a toy and should be treated with appropriate caution. Always practice safety first-as it is possible to lose balance and cause a collision or fall. Ensure that you use the board in a safe appropriate environment, and always wear appropriate safety gear.
  • Safety Gear: we recommend that you wear full safety gear while riding. Please wear a suitable skateboard helmet, elbow pads, knee pads, and gloves.
  • Wear shoes: Flipflops or similar loose footwear are not suitable for riding wear.
• The skateboard is designed for riders over 10 years old and above.
• Only one person riding for each skateboard at a time.
• The maximum load of the board is 150kg. Exceeding this weight will compromise the structural integrity of the skateboard, as well as the remote and functionality, and may cause board damage, losing control, or other breakage.
• Please observe your local traffic laws and regulations.
• The board is designed to drive on flat and paved surfaces. Avoid driving on sand, gravel, mud, rugged or open ground. Do not drive on slippery ground, such as snow, ice, or wet ground.
• Keep fingers, hair, and clothing away from motors, wheels, and moving parts.
• Do not open or tamper with electronics housing.
• Electricshock is possible and this also voids the warranty.

Thank you for buying our electric skateboard skateboard Do note that an electric is not a toy. Please take time to learn it and read this manual carefully. Particularly the safety instruction pages. We hope you will enjoy this product and have lots of fun with it in the future

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>