ANKER 334 MagGo Battery Instructions

: June 12, 2024
: Anker

Table of Contents

334 MagGo Battery
Important Safety Instructions
Declaration of Conformity
GB Declaration of Conformity
FCC Statement
FCC RF exposure statement:
IC Statement
IC RF Exposure Statement:
Customer Service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PAP 22
Raccolta Carta
Product Number: A1642 5100500XXXX V01

334 MagGo Battery

LED Indicator

Note: When Anker 334 MagGo Battery (PowerCore 10K) exceeds the temperature limit, the battery level indicator will turn off. Let it cool down before using it again.

This wireless charger is not compatible with non-Magsafe phone cases, such as Otterbox Defender cases.
Do not use an adapter with an output of 5V/1A (5W) or less.
Wireless chargers make charging more convenient than wired chargers but are confined by current wireless technology. Hence, the charging speed is slower than that of wired chargers.
High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 25°C / 77°F.
The protective phone case and the position of your device on the wireless charger will affect the charging speed. The further it is placed from the center of the wireless charger, the slower the charging speed will be.

Important Safety Instructions

When using this product, basic precautions should always be followed, including the following:

Store this product in a cool and dry place.
Do not store this product in a hot or humid environment.
Using a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or personal injury.
Operating temperature should be between 32 to 104°F / 0 to 40°C.
Do not disassemble this product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or personal injury.
If this product is not used for an extended period, you should charge and discharge it once every three months.
When charging a device, this product may feel warm. This is a normal operating condition and should not be a cause for concern.
Under normal operating conditions, the battery performance will decline over several years.
Do not expose the product to heat or fire.
Do not clean this product with harmful chemicals or detergents.
Misuse, dropping, or excessive force may cause product damage.
When disposing of secondary cells or batteries, keep those of different electrochemical systems separate.
Beware that a discharged battery may cause fire or smoke.
CAUTION: There is a risk of explosion if the battery is replaced by an incorrect type.
WARNING: The batteries (battery pack or installed batteries) shall not be exposed to excessive heat, such as from the sun or fire.
A battery subjected to extremely low air pressure may result in an explosion or leakage of flammable liquid or gas.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this product is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com

GB Declaration of Conformity

Hereby, Anker Innovations Limited declares that this product is in compliance with Radio Equipment Regulations 2017 & The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com

Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
The following importers are the responsible parties (contracts for EU and UK matters): Anker Technology (UK) Ltd GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany

This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
(a) frequency band(s) in which the radio equipment operates;
(b) maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates.

Radiated H-Field	-11.84 dBμA/m@10m
TX/RX frequency range	111-205KHz

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from the connected receiver.
Consult a dealer or an experienced radio / TV technician for help.

FCC RF exposure statement:

This equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. This equipment can be used in portable exposure condition without restriction.

Product Name: Anker 334 MagGo Battery (PowerCore 10K)
Model: A1642
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1-800-988-7973

IC Statement

This device complies with the Industry Canada license-ICES-003. Operation is subject to the following two conditions:

This device may not cause interference, and
This device must accept any interference, including interference that may cause undesired operation of the device.

This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).

IC RF Exposure Statement:

This equipment complies with IC Radiation exposure limits set forth for an uncontrolled environment. This equipment can be used in portable exposure condition without restriction.

Customer Service

For tutorial videos, FAQs, manuals, and more information, please visit: https://support.anker.com
Or scan the QR code below:

https://rainbowbridge.anker.com/qrscan?key=anker-221202

Lifetime technical support
18-month limited warranty*

Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.

support@anker.com
support.mea@anker.com (For Middle East and Africa Only)

(US/CA) +1 (800)988 7973
(UK) +44 (0) 1604 936200

For FAQs and more information, please visit: anker.com/support

@anker_official
@anker_jp| @Anker Deutschland
@Anker Japan
@Anker| @AnkerOffcial
@Anker_JP
---|---|---