Konchi 231290 Wall Lamp White Instruction Manual
- June 12, 2024
- Konchi
Table of Contents
Konchi 231290 Wall Lamp White
Product Information
This product is a lamp that requires mounting screws for installation. It does not come with a bulb included. The lamp hasan IP20 rating, which means it should only be installed in areas where direct contact with water cannot occur. The lamp also has a Class II rating, which means it has double insulation and does not require grounding.
Product Usage Instructions
- Make sure you have the necessary mounting screws to install the lamp.
- Choose a suitable location for installation where direct contact with water is not possible.
- Connect the lamp to the electrical supply by connecting the live (L) wire and the neutral (N) wire to their respective terminals.
- If the lamp has a Z connection, note that the connection lead cannot be replaced.
- Do not exceed the maximum wattage specified for the lamp. The maximum wattage is indicated on the product.
- Dispose of any waste generated during the installation or replacement of the lamp in accordance with local regulations. Contact your local municipality or waste management service for more information on proper disposal methods.
The lamp should only be installed in areas where direct contact with water
cannot occur
Class II: The lamp is double-insulated and does not need to be connected
to the yellow/green earth wire.
Disposal
Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and the environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products from straining nature and the environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city purchased this product.
- The lamp Is only suitable for connecting directly to the mains.
- The mounting instruction must not be discarded.
VOLTAGE
- MAX 25W
- Do not exceed the maximum wattage.
IMPORTANT Always shut off power to the circuit before starting installation work. In some countries, electrical installation work may only be carried out by an authorized electrical contractor. Contact your local electricity authority for advice.
Z-connection
The wire cannot be replaced if damaged, and the lamp must be discarded.
General maintenance
Use a soft, dry cloth for dusting, and a soft, damp cloth to gently remove grease or similar stains. Never use any detergents or chemical reagents. Do not switch on the lamp before all the water has evaporated. Specifically for mouth-blown glass: Mouth-blown glass is formed manually. Because of this unique process, air bubbles may occur in the glass, just as the thickness of the glass may vary. This is to be seen as a natural consequence of the manual process and is what gives mouth-blown glass its character and organic look. Always clean mouth-blown glass when the glass is cold.
INSTALLATION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>