BERTAZZONI DW24T3IXT 24 Inch Built In Dishwasher Instruction Manual
- June 12, 2024
- Bertazzoni
Table of Contents
DW24T3IXT 24 Inch Built In Dishwasher
Instruction Manual
PRODUCT DIMENSIONS
- including a 3/4” (20) thick custom panel
CUTOUT DIMENSIONS
with vertical side trims
installed
without vertical side trims
Cabinet depth shown includes kitchen cabinet
front panel. For a flush installation, a minimum inset depth of 22 1/2” (570)
is required with a custom door panel thickness of 3/4” (20).
ELECTRICAL & WATER CONNECTION
E A properly-grounded, horizontally-mounted electrical receptacle should
be installed according to this drawing.
W To connect the water mains to the water inlet valve thread, use a 3/8”
water inlet hose and 3/4” metal adapter with a length of 60” (1524) (not
supplied).
INSTALLATION REQUIREMENTS
Follow local codes & ordinances for drain requirements. Install a waste line
with an air gap (not supplied) or, alternatively, at least 30” (762) high
drain loop to prevent backflow. Drain hose is 74” (1880) long. Drain hose must
be connected at minimum 20” (508) from the floor.
Dimensions in parentheses are millimeters unless otherwise specified.
CUSTOM PANEL
Door tension can be adjusted to accommodate custom panel weights from 7 lb (3
kg) to 18 lb (8 kg). For custom panels from 18 lbs (8 kg) to 22 lbs (10 kg),
it is necessary to purchase the optional Heavy Duty Springs kit HS24DW.
Suggested panel thickness is 3/4” (20).