Bebe Stars ACE201 102x42cm Bed Rail User Manual
- June 12, 2024
- Bebe Stars
Table of Contents
Bebe Stars ACE201 102x42cm Bed Rail
Product Information
- Product Name: Bed Rail
- Brand: Bebe Stars
- Model: 720 (ACE201)
- Size: 102x42cm
- Compliance: EN STANDARDS BS7972:2001+A1:2009
Product Usage Instructions
- Before using the bed rail, read and understand the user manual.
- Ensure your child’s safety by following these instructions.
- Remove the plastic cover to avoid suffocation risk before using the bed rail. Keep the cover away from babies and children.
- Never leave your child unattended while using the bed rail.
- Assemble the bed rail following these steps:
- Retract the steel pipe of part A to a 90-degree angle.
- Connect the top tube B together, making sure the safety pin is popped up. Connect the bottom tubes C together, making sure the safety pin is popped up.
- Slide the top tubes first into the fabric cover until they reach the full length of the upper part of the fabric. Slide the bottom tubes in the lower side of the fabric cover on its full length.
- Slide the steel tubes of part A into the fabric and connect the tubes, making sure the safety pin pops out.
- To install the bed rail on the bed:
- Place the bed rail on the bed frame and place the mattress on top. Additional screws can be used to fix the bed rail on the bed frame.
- When not in use, pull the safety on both sides of the rail and fold downwards.
- Cleaning and Maintenance:
- Only an adult should carry out the cleaning and maintenance of the bed rail.
- Clean the fabric parts with a soft cloth soaked in water or a neutral detergent.
- Clean the plastic parts with a soft cloth soaked in water. Dry the metal parts if they come into contact with water to prevent rust formation.
- Do not use abrasive detergents or solvents.
- Periodically check that the bed guard components are not worn, broken, or damaged. If any part is worn or damaged, repair or substitute it before using the bed guard.
SAFETY DIRECTIONS
IMPORTANT: RETAIN FOR FUTURE REFERENCE – READ CAREFULLY – YOUR CHILD’S SAFETY MAY BE AFFECTED IF YOU DO NOT FOLLOW THESE INSTRUCTIONS CAREFULLY. WARNING: TO AVOID DANGER OF SUFFOCATION REMOVE THE PLASTIC COVER BEFORE USING THIS ARTICLE. THIS COVER SHALL BE DESTROYED OR KEPT AWAY FROM BABIES AND CHILDREN.
- WARNING: The bed rail is intended for use for children between 18 months and 5 years of age, who are able to climb on and off the bed without their parents’ help.
- WARNING: The bed rail must not be used to replace the cot, since it does not guarantee the same safety standards.
- WARNING: The fixing, fitting, and adjustment operations of the bed rail must only be carried out by an adult.
- WARNING: The bed rail can be fitted on metallic mesh or slats, make sure that the distances between the elements (metallic mesh or slats) are smaller than the size ofthe base of the bed rail. Ensure that the people using the bed rail know how to use it safely.
- WARNING: Before assembly, check that the product and all its components have not been damaged during transportation. Should any part be damaged, do not use and keep out of reach of children.
- WARNING: The bracings must never be removed from the plastic supports and left within the reach of newborn babies and children.
- WARNING: Do not use accessories, spare parts, or any component not supplied or approved by the manufacturer, as they may make the bed rail unsafe.
- WARNING: To prevent the risk of strangulation it is essential to ensure that when the bed rail is fitted into position, there is a gap of at least 250 mm (10 in.) between each end of the bed and the corresponding end of the bedguard.
- WARNING: Do not use the safety bed rail unless all the components are correctly fitted and adiusted.
- WARNING: Never use without the bracings firmly fixed to the bed
- WARNING: Ensure that during use, the bed rail mesh is in contact with the mattress side surface.
- WARNING: The bed rail must not be used with beds in which the top surface of the mattress is higher than 60 cm above the floor.
- WARNING: Do not use the bed rail with mattresses thicker than 20 cm.
- WARNING: The bed rail must not be used by adults, bedridden people or the elderly, or in a non-domestic environment.
- WARNING: Do not use the bed rail if any part is broken, torn or missing
- WARNING: Don’t let other children play unattended close to the bed rail or climb on it.
- WARNING: To prevent the risk of burns or fire, never place the bed rail near electrical appliances, gas cooker or other sources of intense heat. Keep the bed rail away from electrical cables.
- WARNING: Do not place the bed rail near windows or walls, where strings, curtains or other objects may be used by the child to climb out of the bed, and to prevent the riskof suffocation and/or chocking.
- WARNING: Do not leave the bed rail under the sun for a long time: prolonged exposure to direct sunlight may cause the materials or fabric cover to fade.
- WARNING: When folded, store away from children.
- WARNING: The bed rail must not be installed on an extra mattress, outdoor, cot.
- WARNING: Do not use the bed rail on the top section of the structure when used as bunk beds.
- WARNING: Use of the bed rail is not recommended with low density mattresses.
- WARNING: The bed rail must not be used on beds with side panels.
- WARNING: The use of the bed rail is allowed with mattresses: Length minimum 156cm / Width minimum 90cm / Height maximum 20cm. Do not use the bed rail with mattresses thicker than 20cm.
PARTS LIST
- A. Bracing tube with folding mechanism
- B. Top tubes
- C. Bottom tubes
- D. Fabric cover
Parts placement
ASSEMBLY
- Retract the steel pipe of parts (A) to a 90° angle
- Connect the top tubes (B) together, making sure the safety pin is popped up. Connect the bottom tubes (C) together, making sure the safety pin is popped up.
- Slide the top tubes first into the fabric cover until they reach the full length of the upper part of the fabric. Slide the bottom tubes in the lower side of the fabric cover on it’s full length.
- Slide the steel tubes of the (A) parts into the fabric and connect the tubes, making sure the safety pin pops out.
INSTALLATION ON BED
- Place the bed rail on the bed frame and place the mattress on top. Additional screws can be used to fix the bed rail on the bed frame.
The cleaning and maintenance of the bed guard must only be carried out by an adult.
Cleaning
Clean the fabric parts with a soft cloth soaked in water or a neutral detergent. Clean the plastic parts with a soft cloth soaked in water. If the bed guard comes into contact with water, dry the metal parts to prevent the formation of rust. Never use abrasive detergents or solvents.
Maintenance
Periodically check that the bed guard components are not worn, broken or damaged; in such an event, do not use the bed guard before having repaired or substituted the worn or damaged part. Keep the bed guard in a dry place.
Thank you for choosing Bebe Stars products
- FOLLOW US
- www.bebestars.gr.
- bebestarsbygilis
- @bebe.stars
- bebestarsbygilis
- 63200
- Nea Moudania
- Greece
Your child’s safety depends on you. Proper product use cannot be assured unless you follow these instructions DO NOT USE THIS PRODUCT BEFORE YOU READ AND UNDERSTAND THESE INSTRUCTIONS
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>