steinel L1 S Outdoor Lights with Motion Detector User Guide
- June 12, 2024
- STEINEL
Table of Contents
steinel L1 S Outdoor Lights with Motion Detector
Product Information
The product is a lighting fixture model L1 S / L12 S / L15 S. It operates on a voltage of 230 V with a frequency of 50 Hz. The maximum power consumption is 60 W, and it uses an E27 socket. The fixture has an IP rating of 44, making it suitable for outdoor use. It has a detection range of up to 10 meters and a sensitivity range of 2-2,000 lux. The adjustable timer allows for a delay of 8 seconds to 35 minutes.
Product Usage Instructions
- Before installation, ensure that the power supply is switched off.
- Select the appropriate location for the lighting fixture.
- Mount the fixture securely using the provided mounting hardware.
- Connect the live (L), neutral (N), and protective earth (PE) wires according to the electrical standards of your region.
- Insert the desired light bulb into the E27 socket.
- Adjust the detection range and sensitivity as needed.
- Set the desired timer duration using the adjustable timer function.
- Switch on the power supply and test the functionality of the lighting fixture.
- Refer to the user manual for detailed troubleshooting and maintenance instructions.
Note: For further assistance or technical support, please contact our service department at +49 5245-448-188 or email service@steinel.de. You can also find local service contacts on our website at steinel.de/contact.
What’s In the Box
Tool Required
Assembly
Installation
Technical Data
-
Dimensions (H × W x T):
L1 S: 55 x 110 × 120 mm
L12 S: 272 x 155 × 108 mm
L15 S: 410 x 188 × 243 mm -
Angle of coverage: 180°
-
Sensor reach: max. 10 m
-
Power supply: 230 V, 50 Hz
-
Output: max. 60 W / E27
-
IP rating: IP 44
-
Twilight setting: 2-2,000 lux
-
Time setting: 8 s – 35 min
-
Temperature range: -20 bis +40°C
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>