Gechic N161H-R1 Monitor User Manual

M161H-R1 Monitor
User Manual

How-to’s

https://www.youtube.com/playlist?list=PL8_n9EvU4xZXgHjRXnGTIWuxtjMOft10m

Precautions of Using Monitor, Warnings and Warranty Exclusions

The sign alerts you to potential hazards that can hurt you or damage the product.

1. Use only the power supply and power cord that comes with this monitor. Using other power adapter may cause malfunction or danger.
2. It is recommended to use the monitor in a well-ventilated environment at room temperature around 0°C to 40°C and humidity around 45% to 85% The monitor should display continuously changing images rather than displaying the some and o still image for a long time. If you need to use this monitor in an abnormal environ-ment such os high temperature, high humidity, confined space, low atmospheric pressure. etc., please contact Gechic customer service center for further advice on usage environment.
3. When plugging in/out the cables, do make sure the force exerts in horizontal direc-tion and do not shake the plug in vertical direction. Any damage caused by wrong plug urging is not included in the warranty coverage.
4. Cleaning On-Lap Monitor. Unplug the power input before cleaning. Please use soft cloth to clean touch screen. For stubborn stains, please use lightly-dampened cloth to wipe again. Do not use benzene. alcohol, thinner, ammonia. abrasive cleaners, com-pressed air or other corrosive solvents. These solvents may cause permanent dam-age on the screen or leave unremovable stain.
5. Do not expose the LCD panel to sunlight.
6. The product is not waterproof. Do not use this product in or near water.
7. Do not use the volume that may cause damage to hearing; when connecting head-phones to use, please lower the volume setting first. Slowly adjust to the appropriate volume, do not wear headphones for long. continuous, high volume to avoid hearing damage.
8. Overuse of the monitor may result in vision damage. For every 30 minutes with the monitor, give your eyes 10 minutes break. Avoid children under aged 2 watching the monitor; prevent children over aged 2 from watching with the monitor over 1 hour per day.
9. Exclusions from Warranty Service Please read the warranty terms below carefully, and follow the usage guide and precautionary notes. Please keep this manual for future reference. Gechic does not warrant uninterrupted or error-free operation of this Product. The warranty only covers failure /malfunction under normal use conditions during warranty period. The warranty does not apply to the following conditions:
   (1)The bar code has been removed or worn down, and cannot be identified.
   (2)This product has been modified, disassembled, or refitted.
   (3)Display and touch function working normally, only variation in appearance (e.g., age-ing, attrition, scratch, color changing and etc.).
   (4)Any breakdown caused by power supply. (e.g., inputting power over rating voltage or unsteady current)
   (5)Any damage caused by disoperation or failure to follow this manual. (e.g., Plug or unplug cables in wrong direction and causing damage on cables or the monitor.)
   (6)Any damage caused by hitting or cracking monitor accidentally or purposely, or col-lapsing or overturning monitor.

Monitor Parts and Content Description

Optional Accessories

you can use the monitor above the laptop.
M16 VESA 75 Aluminum Alloy Bracket| With 4 VESA 75 screw holes and a 1/4″ screw hole for screwing M16 monitor on a VESA arm, mounting on the wall or installing on the camera cradle head of tripod.
CableUSB Type-C Video (2M)| Connect one end to computers USB-C (DP Alt) port, and the other end to 1416’s USB-C port to transmit audio, video signals and power at the same time.
HDMI-A to mini-HDMI Video Cable (2.1 M)| Connect mini-HDMI plug to camera and connect HDMI A plug to M16 monitor.

How to Use the Stands

Use Quick-Release Stand
A. Adjust the Angles of Stand Turn the Quick-Release Stand downward and adjust angles between 0° and 70°. B. Insert the stand into Quick-release port (Bottom Hole)

1. Press the round button on the release plug by one thumb.
2. Draw out the Quick-Release Stand by the other hand at the same time.
3. With the round button outward, insert the stand into the bottom hole of quick -release cart until the round button ejects.
4. Turn the Quick-Release Stand up-ward and adjust angles between 50° and 80°. Warning! DO NOT adjust the angle of the monitor over 80° forward, or the monitor may foil forward and break.

♦ Us. M1S4 Stand

1. Insert quick-release plug of M1S4 stand into the bottom hole of Quick-release port of M161H monitor until the round button ejects to fasten the monitor.
2. Use the monitor above of the laptop. M1S4 stand viewing-ongle con be adjusted between 20° forward and 50° backward.
   Warning! DO NOT adjust the angle of the monitor over 20° forward, or the monitor may fall forward and break.

The height of the lower edge of the display area from the desktop can be adjusted be-tween 21.97cm and 33.97cm.

Connect to the Thunderbolt 3 Port of Computer or Phone by USB Type-C Port

Notice! The USB Type-C ports on the computer or phone must:

1. support DisplayPort Alternate Mode (USB Type-C(DP Alt Mode)).
2. be able to stably output 5V 2.0A current to the monitor (if the phone cannot supply sufficient current, please connect the adopter to DC IN port of the monitor.)

As shown in the fig., use Gechic USB Tape-C video cable (optional) to con-nect the monitor’s USB-C port to the computer’s USB Type-C(DP Alt) port. The computer outputs power and video signals through its USB TypeC port, so there is no need to connect the power adapter and HDMI cable. To output audio, please connect headphones or speakers to the headphone out jack of the monitor.

Connect to Computer by HDMI Port

As shown in the fig., use USB-A to USB-C power coble to connect the moni-tors DC IN port to 5V 2A adopter (or two USB-A ports of the computer) and connect monitors HON input port to the computer by HDMI-A video cable, game console or other devices. When you need to output audio. please con-nect headphones or speakers to the headphone out jack of the monitor.
WARMING !Please use the HDMI-A cable included In this product in priority. The top side of the HOMI-A plug shell must be less than 3mm_thkk. otherwise it will put pres-sure and cause malfunction on the monitor.

Use of 16A4 Sleeve

The Gechic label is on the FRONT of the sleeve, which is the thick side to protect the screen panel. Please put the thick side of the sleeve up, put the monitor into the sleeve with the panel upward, and then stick the hook and loop tape. Caution! DO NOT put the monitor Into the sleeve with Its panel side toward the back of sleeve. The panel side must face the thick side of the sleeve to protect the panel from being broken.
Caution! Do not put Items on the sleeve or hit the sleeve vigorously, other-wise the screen panel will be broken.

Install VESA 75 Monitor Arm, Wall Mount or T1S2 Stand

Use the M16 VESA 75 Aluminum Alloy Bracket (optional) to secure M161H monitor to o monitor arm, wall mount or T152 Stand (optional). As shown in the fig., please follow below assembly steps :

1. Use two M4 screws to screw the M16 VESA 75 Aluminum Alloy Bracket to the screw holes on the bock of the monitor.
2. Use four 114 screws to screw 1116 monitor to the monitor arm, wall mount or T1S2 stand.

OSD Menu Description

♦ Display Settings
As shown in the Fig. enter “Display Settings” to adjust “Brightness”, “Contrast”, “Sharpness”, etc.

1. ECO Mode: The maximum brightness is at 50 in ECO Mode.
2. Auto Adjust: Launch “Auto Contrast Adjust” and “Auto Brightness Adjust” to adjust brightness and contrast automatically to ensure the highest quality when displaying moving images.
3. Aspect Ratio: When “Full Screen(169)” is selected, the monitor displays a 169 image in full screen. When “4:3” is selected, the monitor displays o 4:3 image with left-right side black borders to fill the 16:9 screen. When “Original” is selected, the monitor displays the image in its original size.

♦ Color Settings

1. Color Effect: If the output format of corn- putter image is RGB Limited, it is recom- mended to select “Standard1″; if it is RGB Full format, it is recommended to select “Stondard2”. Select “Dark Highlight” mode to brighten up dark areas; select “Text” mode to moke HTML text clearer.
2. Blue Light Reduction: Select “On” to reduce the screen’s blue light automatically.
3. Color Temperature: Select “Cool” to in- crease the blue color of the image: Select “Warm” to increase the red color of the image. Select “User” to adjust the RGB color settings manually.

♦ Advanced Settings

1. Auto Power Off: Select “Yes” to activate this function. When there is no image input, the monitor will enter Standby mode, and power off itself after 270 seconds. The power button shall be pressed to turn on the monitor again. Select “No” to disable this function. The monitor will remain in standby mode and will not switch off the power.

2. Power On/Off Indicator : Select “No” to turn off the power on/off indica-tor.

3. OSD Button Lock : If “On” is selected, the four OSO buttons are disabled.
   Press and hold the power button for 5 seconds, the monitor will restore factory settings and enable the four OSD buttons again. (Hot-Key: Press- Ing (S)f=( two buttons at the same time will release OSD Button Lock and enable the OSD buttons)

4. CEC Mode: When “On” is selected and connect to a computer with HDMI CEC function, user may switch the monitor and computer synchronously.
   When switching the computer off, the monitor will be turned off at the same time. However, when switching the computer on , the monitor can’t be turned on automatically. Please turn on the monitor by pressing power button.

5. Overscan: Only applicable to HOMI video signal input (such as 1080P/720P, etc.). Enabling this function will calibrate the display range automatically.

♦ OSD Menu

1. Language Select. Change to the other language.
2. H. Position: Move the OSD menu left/right.
3. V. Position; Move the OSD menu up/down
4. Timer (sec): Adjust the idle time before OSD menu disappears.
5. Transporency: Make the OSO menu trans- parent to show the background.

♦ Audio

Adjust the audio volume or activate the mute made. When “On” is selected for “Mute”, the monitor stops playing audio and the sound can only be played again after ” Mute” mode is turned off.

♦ Input Source

1. Input Source: Select HDMI (video input via HDMI-A port) or USB Type-C (video input via USB Type-C port).
2. Auto Search: When “On” is selected, the monitor will detect two video input sources in sequence, and the monitor will show the first video input read. when “Off” is selected, only the video source selected in Input Source will be displayed. If there is no such selected video input, the monitor will show “No signal” warning message, and won’t detect other video sources.

♦ Information

Show frequency of the input image, model name, firmware version, etc.

General Specification

Support HDCP – HDMI CEC
VESA Mount| VESA 75(75mmx75mm) & 1/4″ screw hole x 1
Power Spec.| Rating Power: 5V::: 2.0A(Typ.) Power Consumption-On: s1OW
Power Consumption-Standby: s 0.3W Power Consumption-Off: s 0.1W
Environment Conditions| Operational: 0-50°C Storage -20-60°C
Dimension (WxHxD)| WxH: 369mm x 232mm D: 7mm- 19mm
Weight (Typ.)| 784g
Certification|

Supported Video Modes

Supported Display Modes

Resolution| Refresh Rate| Horizontal Frequency (kHz)| Vertical Frequency (kHz)
---|---|---|---
640×480| 60Hz| 31.469| 59.940
720×480| 60Hz| 29.855| 59.710
800×600| 60Hz| 37.879| 60317
848×480| 60Hz| 31.02| 60.000
960×600| 60Hz| 37.212| 59.635
1024×768| 60Hz| 48.363| 60.004
1152×864| 60Hz| 53.783| 59.959
1280×600| 60Hz| 37.377| 59.900
1280×720| 50Hz| 37.5| 50.000
1280×720| 60Hz| 45.000| 60.000
60Hz| 44.772| 69.855
1280×768| 60Hz| 47.776| 59.870
1280×800| 60Hz| 49.702| 59.810
1280×960| 60Hz| 60.000| 60.000
1280×1024| 60Hz| 63.981| 60.020
1360×768| 60Hz| 47.712| 60.015
1366×768| 60Hz| 47.712| 59.790
1360×1024| 60Hz| 63.606| 59.836
1400×1050| 60Hz| 65.317| 59.978
1440×900| 60Hz| 55.935| 59.887
1600×900| 60Hz| 55.99| 59.946
1600×1024| 60Hz| 63.675| 59.901
1680×1050| 60Hz| 65.29| 59.954
1920×1080| 50Hz| 56.25| 50.000
1920×1080| 60Hz| 67,500| 60.000
60Hz| 66.587| 59.934

Troubleshooting

please go to Settings — System —. Displays, under Multiple Displays, select “Extend these Displays”.
On Mac OS X, please go to System Prefer-emcees —System -. Displays, click “Arrangement”. Uncheck “Mirror Displays”, then you can use the extended mode.
2. There is no image while connecting PC or smartphone by USB-C port| Your PC or smartphone must support USB Type-C display port Alternate Mode (USBC DP alt mode). Please contact the manufacturer of your PC/smartphone to confirm whether USB-C DP alt mode is supported.
3. The monitor connected to my smartphone via its USB Type-C port flickers or restarts sometimes.| Smartphone may not be able to output stable 5V 2A current to the monitor. Please connect the 5V power adapter to the DC IN port on the monitor.

Scan the QR Code to Find FAQs and Solutions.

LCD Pixel Statement

There is slightly uneven brightness on the screen when displaying different screen pattern. The LCD screen has 99.99% or more effective pixels. 0.01% of pixels or less may not light or may light incorrectly. The On-Lap monitor uses a high quality LCD panel. Nevertheless, pixels on the LCD screen may not light or appear as red or black dots. All the above are normal with the LCD monitor and will not affect the normal usage of the product. Avoid placing the monitor against sun-light, or it may damage the monitor.

WEEE Symbol Information

** This product needs to be recycled at an appropriate recycling point. Do not mix it with household waste.
This symbol on the product, accessories or literature indicates that this product and its electronic accessories (g, adapter, cables) must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of these items by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. For more information about where uou can drop off Hour waste | IR equipment for recycling, please contact your local city office, your house- hold waste disposal service or the shop where you purchased the product.
For Disposal in Countries Outside of the European Union**
If you wish to discard this product and its accessories in other area and countries, please contact your local government for applicable laws and regulations governing the disposal of this product.

FCC Compliance Statement

Notice: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15B of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution:

1. Changes or modifications not expressly approved by Ge Chic Corp. could void the user’s authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.

GeChic Corporation
11F-3, No. 138, Chongming S. Rd.,
West Dist., Taichung, Taiwan
Customer Service: service@gechic.com

https://www.gechic.com/| https://www.facebook.com/GechicglobalOfficial/
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>