hama 00047857 Pro-S 60M Power Strip Instruction Manual

00047857
Power Strip
Steckdosenleiste

Operating Instructions

Thank you for choosing aHama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If
you sell the device, please pass these operating instructions on to the new owner.

 Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Package Contents

• Power Strip
• These operating instructions

Safety Notes

• The product is intended for private, non-commercial use only.
• The product is intended for indoor use only.
• Use the product for its intended purpose only.
• Children are not permitted to play with the device.
• Protect the product from dirt, moisture, and overheating, and only use it in an adry environment.
• The product may only be operated with the type of power supply network described on the nameplate.
• Only connect the product to a socket that has been approved for the device. The electrical socket must always be easily accessible.
• The overvoltage protector may be operated only on an a16Afused mains socket with a properly installed protective conductor.
• Do not connect to extension cables, power strips, or adapters.
• Lay all cables so that they do not pose a tripping hazard.
• Do not bend or crush the cable.
• Never connect multiple units of this product in a series.
• Disconnect the product from the network using the power button –if this is not available, unplug the power cord from the socket.
• Always pull directly on the plug when disconnecting the cable, never on the cable itself.
•  Do not continue to operate the device if it becomes visibly damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
• If the device is used commercially, the increased duty of care requirements apply.
• Therefore, please observe the accident prevention regulations of the German employer’s liability insurance association for electrical systems and
  equipment. Please also observe all accident prevention regulations from other applicable employers liability insurance associations and accident insurance companies, as well as any legal regulations applicable to the particular industry and/or location.

Proper use

The built-in overvoltage protector is designed for mains-related overvoltage caused by switching processes or distant lightning strikes. Additional
measures must be taken to safeguard against direct lightning strikes. Coarse protection (requirement clause) must be provided for in the building’s
electrical system. The primary intended purpose of the product is to protect high-quality telephone and computer systems and audio, video and satellite
devices.

Connection

All devices must be switched off before devices can be connected. The overvoltage protector may be connected only between the electrical consumer and an earthed socket. In the operational state, the indicator light for the overvoltage protector lights up.

Warning
If the indicator light is not lit after switching on, the overvoltage protector is defective –it may no longer be used and must be exchanged for anew
overvoltage protector.

Care and Maintenance

• Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
• Make sure that water does not get into the product.

Warranty Disclaimer

Hama GmbH &Co. KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of
the product or from failure to observe the operating instructions and/or safety notes.

 Insurance cover of 20 million euros

Our product liability insurance provides cover of up to 20 million euros for personal injury and damage to property. The prerequisites are proper product use (please note the safety information) and proof that the damage is attributable to non-compliance with the described protective function (please see the technical specifications on the type plate and in these operating instructions).

Technical Data

Overvoltage protection| Up: 1,5kV(L-N)/2,0kV(L/N-PE)
Uoc: 6,0kV(L-N,L/N-PE)/ Typ III (T3)
Uc: 255V~ 50Hz
---|---
Total leakage current| 18.000 A(3×6.000 A)
Cable length| 1,5 m
Mains supply| 220-240 V/50-60 Hz /16A
Cable cross-sectional area| 1,5 mm²
Connected load| max. 3680 W

Recycling Information

Note on environmental protection:
After the implementation of the European Directive 2012/19/EU and 2006/66/EU in the national legal system, the following applies: Electric and electronic devices, as well as batteries, must not be disposed of with household waste. Consumers areobliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual, or the package indicates that a product is subject to these regulations. By recycling, reusing the materials, or other forms of utilizing old devices/Batteries, you are making an important contribution to protecting our environment.

Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
www.hama.com
+49 9091 502-0
****All listed brands are trademarks of the corresponding companies. Errors and omissions excepted,
and subject to technical changes. Our general terms of delivery and payment are applied.
00047857/08.21

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>