milwaukee DG30E Speed Single Handed Die Grinder Instructions

milwaukee DG30E Speed Single Handed Die Grinder

Product Information

Specifications

• Model: DG 30 E
• Model: DGL 30 E
• Model: DGL 34
• Power Output: 500 W (DG 30 E), 600 W (DGL 30 E), 500 W (DGL 34)
• No-load Speed: 10000-30000 min-1 (DG 30 E, DGL 30 E), 34000 min-1 (DGL 34)
• Chuck Diameter: 6 mm
• Max. Cutting Depth: 20 mm
• Weight: 1.3 kg (DG 30 E), 1.9 kg (DGL 30 E), 1.8 kg (DGL 34)

This document provides information about the Milwaukee heavy-duty power tools with details on operation and functionality.

Operation Instructions

Starting and Stopping
To start the tool, push the switch forward. To stop the tool, pull the switch backward.

Accessory Change

1. Press the spindle lock and use the provided wrench to loosen the collet nut.
2. Remove the current accessory and insert the new one.
3. Tighten the collet nut securely with the wrench while holding the spindle lock.

Working Tips

• Ensure the accessory is properly secured before use.
• Do not apply excessive pressure; let the tool do the work.
• Use appropriate personal protective equipment.

Product Usage Instructions

Section 1: Safety Precautions
Before using the product, please read and follow these safety precautions:

• Always wear protective eyewear and gloves.
• Ensure the work area is well-ventilated.
• Do not use the product near flammable materials.
• Keep hands away from the cutting area.

Section 2: Assembly
To assemble the product, follow these steps:

1. Attach the appropriate chuck to the tool.
2. Securely tighten the chuck using the provided wrench.

Section 3: Operation
To operate the product, follow these steps:

1. Connect the tool to a power source.
2. Hold the tool firmly with both hands.
3. Turn on the tool using the start button.
4. Guide the tool along the desired cutting path.
5. Turn off the tool using the stop button.

Section 4: Maintenance
To ensure the longevity of the product, perform regular maintenance:

• Clean the tool after each use.
• Check for any loose parts and tighten if necessary.
• Replace worn or damaged parts immediately.

Safety and Compliance

The tools comply with the relevant safety standards for power tools, including EN 60745. Always wear appropriate safety gear and follow operational guidelines to prevent accidents and injury.

Declaration of Conformity
This product is declared to conform to the following standards: EN 60745-1:2009+A11:2010, EN 60745-2-23:2013, EN 55014-1:2017+A11:2020, EN 55014-2:2015, EN 61000-3-2:2014, EN 61000-3-3:2013, and EN IEC 63000:2018.

• Date of issue: 2021-01-20
• Place of issue: Winnenden, Germany
• Authorized representative: Alexander Krug

Warning Symbols

• Read instruction manual before use.
• Wear eye protection.
• Wear hearing protection.
• Double insulation.
• Do not expose to rain or use in damp locations.
• Keep hands away from moving parts.
• Use with an appropriate dust extraction facility.

FAQ

How do I choose the right chuck size?

The chuck size should match the diameter of the cutting tool you plan to use. Refer to the specifications for the recommended chuck size for each model.

What is the maximum cutting depth?

The maximum cutting depth is 20 mm for all models.

How do I clean the tool?

After each use, wipe down the tool with a clean cloth. Use a soft brush to remove any debris from hard-to-reach areas.

How do I install a new accessory?

Follow the accessory change instructions outlined in the Operation Instructions section.

What should I do if the tool is not operating correctly?

Check for proper installation of accessories and ensure the tool is connected to the power supply. If issues persist, refer to the troubleshooting guide or contact support.

Can these tools be used for heavy-duty applications?

Yes, these Milwaukee tools are designed for heavy-duty use, as indicated by the brand's slogan, Nothing but HEAVY DUTY.'

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>