Newell BP-4CHT Four Channel Charger for V Mount Batteries Instruction Manual

Newell BP-4CHT Four Channel Charger for V Mount Batteries Instruction Manual

SAFETY INSTRUCTIONS

1. Do not charge batteries that are ot ntended for this device, as tis may damage the battery. and lead 1o leakage and explosion.
2. Do not drop the unit or place heavy objects on it
3. Store n a dry, cool and ventilated place. Do not expose the device to moisture o rain.
4. Keep oway from heat sources and places of high temperature.
5. Do not expose to direct sunlight
6. The device can operate in temperature range O°C – 40°C.
7. Do not leave it unattended when charging,
8. Remove the batteries from the charger when not In use.
9. Keep out of reach of children.
10. Siight warming up of the device is normal,
11. Do not move the charger when it is working,
12. you notice smoke or a sirange smell coming from the device, Immediately disconnect the pover
13. Do not disassemble. Disassembling the unit il void the warranty, If there are problems with the lamp, bing it to an authrized service center.

PRODUCT DESCRIPTION

1. AC Power
2. Charging State LED
3. Battery Online LED
4. Discharging State LED
5. DC output (XLR connector
6. Battery Release Lever
7. Charging Terminal
8. AC Power Switch
9. AC Socket
10. Radietor Fan

PRODUCT FEATURES

• This charger can charge Vmount batieries with a nominal voltage of 14.4V/14.8V.
• No change required at 100-240V.
• Equipped with XLR 4P terminal interface, it can be used as a DC power supply for example cameras.
• A fully charged lithium-ion battery can be used as backup power.
• The outputs are: four groups of V-mount ports and two groups of DC ports (the four groups are divided 010 two groups on the left and right, and each group corresponds to the DC ports on the left and righ) The charging current of the tour groups of V-portsis 30A respectively, and the output current of the two group of DC ports s 6A respectively.

USAGE

Connecting the AC power cable **

**

Connect the AC power cable to the BP-4CHT charger and plug it in, then set the switch ta the “I position as shown in the picture. Place the charger in a ventiated place and do not obstruct the radiator fan.

Use as a charger **

**

• Instal the battery In the charger as shown In the figure.
• After_connecting the battery, the charger can charge the battery and the corresponding. indicator will light up. If the corresponding indicator does ot light up, check the connection between the charger and the battery pack.
• When the battery is charged to 85% the charging Indicator Wil tum from red to green, and when the battery is fully charged, the indicator light will turn off
• When removing the battery from the charger, press the release lever firmly while lfting the battery staight up.

Using with DC output

• Connect using XLR cable to power the devices
• When the DC output port is connected with the cable, the charger starts powering the DC output and stops charging the batterles.
• When the AC power is off, the online batteries can be used as emergency power and Supply sequential DC output thiough the XLR 4P connector, and the LED Indicating discharge wil light up accordingly.
• If the battery Is removed from the charger during the power process, the DC output willnot be tumed off. Confirm the required voltage and current of the device connected 1o the XLR cable before use.
• The charging function and DC output function cannot be used at the same time:
• When the charger is operating as a charger, the DC output function is disabled.
• When the DC output s operating, charging is. disabled.
  Rated Voltage: MAX 99W (16.5V=64)

LED STATE INDICATION

turned ON
Red LED light up| | Charger being powered on
Charging State| LED Indicator| Meaning
---|---|---
Red LED light up| | The battery in the same position on the same side is charging
Green LED light up| | The charging capacity of the battery Is more than 85%
Green LED light off| | The battery is fully charged
Red LED flickers| | Output is short-circult or overloaded
Battery Online| LED Indicator| Meaning
---|---|---
Blue LED light up| | The battery is connected well and s In good condition
Blue LED light off| | The battery is connected to the charger abnormally or the battery power is low.
Dictarang state| LED Indicator| Meaning
---|---|---
Geen L£D light up| | The battery ate being discharged through the XLR 4P terminal
Geen L£D light off| | The bateris are notbeing dischargea trougn the XLR 4P terminal

SPECIFICATION

16:8V=3A 14 (charging 1 or pcs batteries at the same time)
Operating temperature| 0’C-40°C
Operating humidiy| 0%35%
Dimension| 290 x 156 x 191 mm (Lx W x H)
Weight| 22809

• The manufacturer reserves the fight to change the information contained In this manual without pricr notice,

WASTE MANAGEMENT

The crossed-out trashcan symbol means that waste electrcal and electronic, batteries. and packagings must not be placed with other household waste. They must be handed over 10 3 separate waste collection system.

WARRANTY

Newell products are covered by a 40-month manufacture’s warranty.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>