denver MT-1097 Portable DVD Player Instruction Manual

: June 12, 2024
: Denver

Table of Contents

denver MT-1097 Portable DVD Player
Product Information
Product Usage Instructions
Safety information
Identification of Controls
- Main Unit
- Remote control unit
Parameters and specifications
Contact Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

denver MT-1097 Portable DVD Player

denver-MT-1097-Portable-DVD-Player-product

Product Information

Product Name: MT-1097
Manufacturer: Denver A/S
Website: denver.eu
Date of Manual: May 2023
Recyclability: This product, its cords, and accessories are recyclable.

Safety Instructions

This product is not a toy. Keep it out of reach of children.
Warning: This product includes a lithium polymer battery.
Keep the product and batteries out of the reach of children and pets to avoid chewing and swallowing.
The product’s operating and storage temperature range is from 0°C to 40°C. Operating or storing the product outside this temperature range may affect its function.
Only use the original adaptor supplied with the model.
Never open the product as it may contain parts with deadly voltage.
Repairs or service should only be performed by qualified personnel.
The standby button on the remote control only puts the unit in standby mode.
The direct plug-in adapter is used as a disconnect device. Ensure there is space around the power outlet for easy access.
Protect your ears against loud volume as it can damage your ears.
Do not expose the product to heat, water, moisture, or direct sunlight.
The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. Do not remove the cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.

Product Usage Instructions

Press the POWER button to turn on the product.
To open the lid and insert a DVD, press the button labeled “Press to open lid and insert DVD”. Close the lid and switch ON.
Use the navigation buttons (numbered 1-7) to navigate through DVD/USB/SD menus and options.
Use the buttons labeled “FWD” and “/STOP” for fast-forwarding and stopping playback, respectively.
Adjust the volume using the buttons labeled “VOL-” and “VOL+”.
Use the SD CARD slot to insert an SD card for playback.
The AV IN port allows you to connect external audio/video devices.
Press the A-B button to set points A and B during AVI/CD/VCD/SVCD playback. The points must be within the same track.
During AVI/DVD playback, points A and B can be selected from different chapters.
Press the PROG button to access the program menu when reading DVD & VCD. Program your desired songs. Note that this function is unavailable for MP4.
Use the buttons labeled “ZOOM” to enlarge or shrink the video image during DVD/VCD playback.
Set the parental control rating by pressing the PARENTAL button and choosing the desired rating. Enter the code “0000” to confirm. To change the code, set on password and press change. Input the old password “0000”, then input the new code and confirm.
Refer to the manual for additional instructions and parameters.

If you encounter any inaccuracies or omissions in the manual, please inform Denver A/S using the contact information provided on the back cover.

Note:
The instructions provided here are a summary. Please refer to the complete user manual for detailed information and usage instructions.

Safety information

Please read the safety instructions carefully before using the product for the first time and keep the instructions for future reference.

This product is not a toy. Keep it out of reach of children.
Warning: This product includes a lithium polymer battery.
Keep products and batteries out of the reach of children and pets to avoid chewing and swallowing
Product operating and storage temperature is from 0 degree Celsius to 40 degrees Celsius. Under and over this temperature might affect the function.
Only use the original adaptor which are supplied with the model.
Never open the product: the device may contain parts with deadly voltage.
Repairs or service should only be performed by qualified personnel.
Please notice that the standby button on the remote control only put the unit in standby.
The direct plug-in adapter is used as a disconnect device, the disconnect device shall remain readily operable. So, make sure there is space around the power outlet for easy access.
Please protect your ears against loud volume. Loud volume can damage your ears.
Do not expose to heat, water, moisture, direct sunlight!
This lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. To reduce the risk of electric shock, do not remove the cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.

ATTENTION:
This symbol indicates that this appliance is a class 1 laser product.

Do not try to open the cover or look at the laser beam.
Never touch the laser lens inside the compartment.

Denver A/S reserves the right to print errors
Denver A/S cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. If you detect any inaccuracies or omissions, please inform us at the address on the back cover.

Identification of Controls

Main Unit

SOURCE/DVD/USB/SD
SETUP/MENU
Up /Prev
- Down / Next
- 44 Left / REV
- Right / FWD
PLAY/PAUSE/STOP
VOL- / VOL+
USB
SD CARD
Earphone Socket
AV OUT
AV IN
TURN ON/OFF
DC IN 12V
Press to open the lid and insert the DVD. Close the lid and switch it ON $denver-MT-1097-Portable-DVD-Player-fig- $1$$

Remote control unit

POWER
SUBTITLE
Press SUBTITLE repeatedly during playback to hear a different subtitle language.
TITLE
Return to DVD title menu.
SETUP
Accesses or removes setup menu.
ENTER
Confirms menu selection.
REPEAT
Press REPEAT during playback to select a desired repeat mode.
- DVD: you can play select repeat chapter/title/off.
- CD/VCD: you can select repeat single/all/off.
A-B
Press A-B a third time to cancel A-B repeat and clear points A and B.
Note: During AVI/CD /VCD/SVCD playback, points A and B must be within the same track. During AVI/DVD playback, points A and B can be selected from different chapters.
PLAY/PAUSE
Press PLAY/PAUSE once to pause playback, pressing PLAY/PAUSE a second time will resume the playback.
STOP
When this button is pressed once, the unit records the stopped point, from where playback will resume if PLAY( )is pressed afterward. But if the STOP button is pressed again instead of PLAY( ) button, there will be no resume function.
Reverse Skip
Go to the previous chapter/ track to the beginning.
Forward Skip
Go to the next chapter/ track.
BUTTON
Press the BUTTON to allow skipping back at 5-level speed (X2->X4-

X8->X16->X32->PLAY), and press the PLAY button to return to normal playback.
PROGRAM
Press PROG to get the program menu when reading DVD & VCD, then program your wanted songs. This function is unavailable for MP4.
AUDIO
- DVD: Press AUDIO repeatedly during playback to hear a different audio language or audio track, if available.
- CDNCD: PressAUDIO repeatedly during playback to hear a different audio channel (Left, Right, Mix, Stereo).
SOURCE
DVD/AV IN
0-9 NUMBER BUTTON
Selects numbered items in a menu.
GOTO
Goto time point, title or chapter you want in DVD Mode.
1O+ BUTTON
In order to select a track 10 or greater, first press 1 O+, For example; select track 12, first press 1 O+, and then press the number 2 button.
ANGLE
DVD: Press ANGLE will change the view angle, on DVDs that support this feature.
MENU
Return to the DVD root menu(DVD).
OSD
To display the playtime and status information.
ZOOM
DVD/VCD: Use ZOOM to enlarge or shrink the video image.
Press ZOOM during playback or still playback to activate the Zoom function. The square frame appears briefly in the right bottom of the picture.
Each press of the ZOOM button changes the TV screen in the following sequence:
2X size – 3X size – 4X size – 1 /2 size – 1/3 size – 1 /4size-normal size
SLOW
Press the Slow button repeatedly to enter slow playback, and cycle between different speeds. The speeds are 1/2, 1/4, 1/8, 1/16,and normal.
STEP
Step the motion in DVD mode.
VOL+
VOL
VOLAdjust volume
BUTTON
Press the BUTTON to allow skipping ahead at 5-level speed (X2->X4-

X8->X16->X32->PLAY), and press the PLAY button to return to normal playback.

Set on “PARENTAL” press “PARENTAL” and choose the desired rating. Then input the code “0000’ and enter it, the desired rating you chose is effective. The original factory code is “0000”. lf you want to change the code, Set on “password” and press “change”, Input the old password “0000”, then input the new code and confirm.

Parameters and specifications

Electrical parameters

Item	Standard requirement
Power requirements	: AC 100-240 V , 50/60 Hz
Power consumption	: =12W
Operating humidity	: 5 % to 90 %

System

Laser	: Semiconductor laser, wavelength 650 nm
Signal system	: NTSC / PAL /AUTO
Frequency response

: 20Hz to 20 kHz(1dB)

Signal-to-noise ratio| : More than 80 dB (ANALOG OUT connectors only)
Dynamic range| : More than 85 dB (DVD/CD)

Note: Design and specifications are subject to change prior notice.

Battery Parameters

Battery Specifications:
- Output: 7.4V
Charge/Discharge Time:
- Standard charge time: 3h ~ 4h

Storage and work circumstances:

Storage circumstances/Temperature/Humidity****
6 months| -20 C ~ +45 C| 65+20%
---|---|---
1 week| -20 C ~ +65 C| 65+20%
Work circumstances/Temperature/Humidity****
Standard charge| 0 C ~ +45 C| 65+20%
---|---|---
Standard discharge| -20 C ~ +65 C| 65+20%

Manufacturer’s name or trademark, commercial registration number, and address| Shenzhen Run Sheng Feng Power Supply Techonolgy Co., Ltd commercial registration number: 91440300580068676U 3rd Floor, 4th Building, Zone A Xinfu Industrial Park, Chongqing Road, Fuyong Street, Bao’an

District, Shenzhen, China

---|---
Model identifier| RSF-DY080-1201000EU
Input voltage| 100-240V
Input AC frequency| 50/60Hz
Output voltage| 12V
Output current| 1A
Output power| 12W
Average active efficiency| 83.61% at 115V/60Hz

84.31% at 230V/50Hz

Efficiency at low load (10%)| 80.95% at 115V/60Hz

77.78% at 230V/50Hz

No-load power consumption| 0.05W at 115V/60Hz

0.07W at 230V/50Hz

Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.

ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S
Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly. Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately.

As the end user it is important that you submit your used batteries to the approriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment.
All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.

DENVER A/S
Omega 5A, Soeften DK-8382 Hinnerup Denmark.
www.facebook.com/denver.eu.