Newell Air 1100 LED Lamp User Manual

Newell Air 1100 LED Lamp

SAFETY INSTRUCTIONS

Before using the product, please read the following instruction manual carefully and keep it for future reference. When transferring the product to a third party, it is advisable to include the instructions.

1. The lamp is a precision device. Do not drop, hit, crush or expose to any shock.
2. The unit is not dustproof or waterproof. Store in a dry, cool and ventilated place. Do not expose to water or other sources of moisture.
3. Do not use near flammable materials and solvents.
4. Do not use the lamp too close to objects. Do not cover the ventilation holes. Do not insert metal parts into the lamp. Do not touch the electrical parts with conductive materials.
5. 5. The lamp can operate in a temperature range of 0
6. The lamp will heat up slightly, but it is normal.
7. Do not stare directly at the LED panel that is turned on, it may cause eye damage.
8. Do not use the LED outside in direct sunlight for a long time.
9. Disconnect the power supply for storage or transportation.
10. Allow the unit to cool down before placing it in the package. For use by adults.
11. If you notice smoke or a strange smell coming from the device, immediately disconnect the power. Do not disassemble. Disassembling the unit will void the warranty. If there are problems with the lamp, bring it to an authorized service center.

Maintenance

Use a dry and soft cloth to clean the unit. Do not clean with water. A little neutral detergent on the cloth to remove stubborn dirt. Do not use strong detergents such as thinner, benzine or alcohol as they may damage the protective coatings.

PRODUCT DESCRIPTION

• 1. Barn doors
• 2. LED light panel
• 3. Battery compartment
• 4. Battery removal buton
• 5. TFT display
• 6. MODE butt on
• 7. Fn1 button
• 8. Fn2 button
• 9. Fn3 button
• 10. Fn4 button
• 11. Power switch
• 12. DC input socket
• 13. SET function knob
• 14. Fixing bracket removal button
• 15. Angle ajustment knob
• 16. Bracket fixing knob
• 17. Fixing the bracket
• 18. Remote control

POWER ON/OFF

1. Use battery power
   Insert two NP-F series batteries into the battery compartment of the photography light in the correct direction. Flip the power switch to the ,.I”. The LCD screen display lights up and the photography light will turn on.

2. Use external adapter for power supply
   Use an external adapter to supply power. Connect the 15V 4A adapter to the power supply. Flip the power switch to the .,II”. The LCD screen display lights up, and the light will turn on normally.

3. Power off
   In the power state, turn the power switch to .,O”. The LCD screen display goes off and the light turns off.

Function adjustment settings

Control panel

mode
 | Fn2| Function key Fn2; press it to enter the menu and choose group and channel modes
4| Fn3| Function key Fn3; press it to enter the menu and choose hue, temperature color and scene mode.
5| Fn4| Function key Fn4; press it to enter the menuand choose saturation or scene mode
6| SET| Function knob, adjust the current parameter value
 | POWER| Power switch; toggle to the battery to supply power to the batte ry, toggle to the

DC to supply power from the power adapte r

8| DC| Adapter power input – DC jack

Function description

Air 1100 RGB light has three modes: CCT, HSI, SCENES.

• CCT mode
  • After the product is turned on, it can be cycled through the MODE button (CCT ->HSI -> SCENE) Brightness adjustment -> Press the Fn1 key to select the brightness parameter in the screen and then adjust the brightness through the SET function rotary knob.
  • Color temperature adjustment -> Press the Fn3 key to select the color temperature parameter in the screen and then adjust the color temperature through the SET function rotary knob.
• HSI mode
  • Brightness adjustment-> Press the Fn1 key to select the brightness parameter in the screen and then adjust the brightness through the SET function rotary knob.
  • Hue adjustment-> Press the Fn3 key to select the hue parameter in the screen and then adjust the hue through the SET function rotary knob.
• SCENE mode
  • Brightness adjustment -> Press the Fn1 key to select the brightness parameter in the screen and then adjust the brightness through the SET function rotary knob.
  • Scene adjustment -> Press the Fn3 key to select the scene parameter in the screen and then use the SET function rotary knob to adjust different effects.
  • In each of mode you can change also group and channel.
  • Group adjustment -> Press the Fn2 key select to select the Gr parameter on the screen and then use the SET function rotary knob to adjust the Gr group (group A-C).
  • Channel adjustment -> Press the Fn2 key to select the parameters on the screen and then use the SET function rotary knob to adjust the channel value (ch1-ch40).

REMOTE CONTROL

Description of the remote control

1. Power button: Short press of this button is used to turn on the remote control and long press is used to turn off the remote control.
2. Display: Show the menu and related parameters of the remote control.
3. 3. Function key area:
   • It is used to enter the 2.4G parameter setting menu. In this menu, the parameters of CH and GR can be set and the product can also be controlled to switch on and off.
   • FX Used to enter scene mode, preset effect, can be selected under this menu.
   • CCT Used to enter the dual color temperature mode, the color temperature and brightness of the white light can be set in the menu.
   • HSI Used to enter the HSI mode, and RGB parameters can be set in this menu.
   • Navigation keys, used to switch parameter items and change parameters.
   • The brightness adjustment button can be used to G adjust brightness in any interface.
4. Shortcut key area: Press the keys in this area to quickly set the product parameters to the parameters marked on the keys.
5. Battery compartment: used to assemble two AAA batteries to power the remote control.

Remote control operation instructions

1. Switch machine:
   Insert two AAA batteries into the battery compartment according to the positive and negative signs in the battery compartment Short press the button on the remote control to tum on the remote control. In the power-on state, long press button on the remote control to tum off the remote control.

2. Connect with the product:
   Press button on the remote control to enter the 2.4 parameter setting interface.
   Use the navigation keys to set the values of CH and GR to be consistent with the product. Then the remote control can control the product remotely. In this menu, move the cursor to the GR parameter and press the FN key to control the product that is consistent with the currently displayed channel group to turn on or off. This function enables individual control of multiple products using one remote control, without exceeding the remote-control distance. The maximum number of independent control products is: 40 (CH)* {GR) units.

3. Contorol:
   When the remote control is connected to the product normally:

   • Press the FX button to enter the FX mode. In this mode, press the navigation key to switch between different preset effects.
   • Press the CCT button to enter the CCT mode. In this mode, press the navigation button to adjust color temperature of the product
   • Press the HSI button to enter the HSI mode. In this mode, press the navigation up and down keys to switch the RGB color hue and saturation options. Press the navigation left and right to set the value of the current option.
   • Press the button in the shortcut key area to quickly set the product parameters to the parameters of colors marked on the button. DIM ‘+’ and ‘-‘buttons in all above modes, can control the decreasing and increasing of brightness.

APP OPERATION GUIDE

1. Use your mobile phone to scan the unified download QR code corresponding to the picture above or search for RHO Light” app through Google Play (Android) or App Store (Apple iOS) to download.

2. Open the app, you need to agree to all the necessary pennissions and function switches. If the Bluetooth is not turned on, it will prompt to turn on the Bluetooth to scan and connect the device, select .,OK”, to turn on the Bluetooth” or manually turn on the mobile phone Bluetooth.

3. The product starts normally. 

4. As shown in pie 1, click”+” on the app to enter the ,.device scanning” interface to start scanning devices. After wiling for about a few seconds, the ,,bound device picture and deice name” as shown in pie 2 will be displayed. Click to display the pie 3 interface. Click picture 3 interface: the status: the figure 4 interface will appear. Click the top right of picture 4 interface (Gr:A CH:1) to select group channel that is the same as the product lamp. By selecting different tabs on the top of the app, you can control and adjust the product in the corresponding interface under the app. Click
   ,.connected” in picture 3 to slide to the left and picture 5 will appear.

5. Click ,,delete” in picture 5 to prompt o delete the bound device.

Note: click help on each interface of the app to display specific operation guide of the app.
*If no device is detected during tracing, please check whether the product is turned on and the Bluetooth of the mobile phone is turned on.

PRODUCT SIZE

• Unit: mm
• Tolerance:± 1.0mm
• L=384.5
• W=38.9 H=274.5

SPECIFICATION

Lm

Color temperature range: 2500K – 8000K ± 200K

CRI: CRI > 95 TLCI > 95

Color hue| 0-360°
Saturation| 1-100
Brightness scope| 1- 100%
Diffuser| 1 pcs
Barn door| 4 pcs (0 – 180 ° angle adjustment)
Control mode| Button + knob+ APP
Display screen| TFT color screen
APP Channel| 1-40
Group| GRA-C
Re mot e control distance| 15 m
Illuminati on angle| >120 °
Power supply| DC adapter 15V 4A (included) 2x NP-F batteries (not included)
Product weight| About 2171 g
Humidity| 20 – 80 %
Operating environm ent temp erature| 0 -35°C
Storage temperature| -10 – 50 °C

*The manufacturer reserves the right to change the information contained in this manual without prior notice.

WASTE MANAGEMENT

The crossed-out trashcan symbol means that  waste electrical and  electronic equipment,  batteries and packagings must not be placed with other household waste. They must be handed over to a separate waste collection system

WARRANTY

Newe ll products are covered by a 40-month manufacturer’s warranty.

Made in China. In China hergestellt, Hecho en China, Fabbricato in Cina,

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>