nordlux 231297 Skyku Cloud Wall Light Instruction Manual
- June 12, 2024
- nordlux
Table of Contents
nordlux 231297 Skyku Cloud Wall Light
Product Information
This product is a lamp that requires mounting screws for installation. It has an IP20 rating, which means it can only be installed in areas where direct contact with water is not possible. The lamp is classified as Class II, which means it has double insulation and does not require grounding. The maximum wattage for the lamp is 25W.
Product Usage Instructions
- Before installation, ensure that mounting screws are available.
- Select a suitable location for the lamp installation, ensuring that it is an area where direct contact with water cannot occur.
- Connect the lamp to the power supply using the provided L and N connections.
- Make sure to comply with the maximum wattage of 25W and do not exceed it.
- If a bulb is not included, purchase a suitable bulb separately.
- Follow the appropriate disposal guidelines for waste electrical and electronic equipment. Do not dispose of the product with household waste.
INSTALLATION INSTRUCTION
- IP20: The lamp should only be installed in areas where direct contact with water cannot occur.
- Class II: The lamp is double-insulated and does not need to be connected to the yellow/green earth wire
- Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances that may cause damage to human health and the environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products from straining nature and the environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city purchased this product
- The lamp is only suitable for connecting directly to the mains.
- The mounting instruction must not be discarded.
- IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorized electrical contractor. Contact your local electricity authority for advice.
- Z-connection: the wire cannot be replaced if damaged, and the lamp must be discarded.
- Do not exceed the maximum wattage.
General maintenance
- Use a soft, dry cloth for dusting, and a soft damp cloth to gently remove grease or similar stains. Never use any de- tergents or chemical reagents. Do not switch on the lamp before all the water has evaporated. Specifically for mouth-blown glass: Mouth-blown glass is formed manually. Because of this unique process, air bubbles may occur in the glass, just as the thickness of the glass may vary. This is to be seen as a natural consequence of the manual process and is what gives mouth-blown glass its character and organic look. Always clean mouth-blown glass when the glass is cold.
- www.nordlux.com
- Nordlux A/S
- Ostre Havnegade 34
- DK- 9000 Aalbora
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>