Newell Kathi Nano Pro LED Light User Manual

Newell Kathi Nano Pro LED Light

SAFETY INSTRUCTIONS

Before using the product, please read the following Instruction manual carefully and keep it for future reference. When transferring the product to a third party. it is advisable to include the instructions.

• The lamp is a precision device. Do not drop, hit, crush or expose to any shock.
• The unit is not dustproof or waterproof. Store in a dry, cool and ventilated place. Do not expose to water or other sources of moisture.
• Do not use near flammable materials and solvents.
• Do not use the lamp too close to objects. Do not cover the ventilation holes. Do not insert metal parts into the lamp. Do not touch the electrical parts with conductive materials.
• The lamp can operate in a temperature range of 0°C – 40°C.
• The lamp will heat up slightly, but it is normal.
• Do not stare directly at the LED panel that is turned on, it may cause eye damage. Do not use the LED outside in direct sunlight for a long time.
• Disconnect the power supply for storage or transportation. Do not lift the camera while holding the lamp handle.

Allow the unit to cool down before placing it in the package. For use by adults. If you notice smoke or a strange smell coming from the device, immediately disconnect the power. Do not disassemble. Disassembling the unit will void the warranty. If there are problems with the lamp, bring it to an authorized service center.

Important!

• When the device shows low power, please recharge the lamp.
• When not in use for a long time, please recharge it every 3 months to ensure the durability of the battery.
• Please cover the rubber piece of USB ports well after recharging of discharging to avoid foreign matter.

Maintenance

• Use a dry and soft cloth to clean the unit. Do not clean with water. A little neutral detergent on the cloth to remove stubborn dirt.
• Do not use strong detergents such as thinner, benzine or alcohol as they may damage the protective coatings.

SET CONTENT

• Kathi Nano Pro RGB Light
• USB-C recharge cable
• Cold shoe adapter
• User manual

The manufacturer reserves the right to change the information contained in this manual without prior notice.

CONSTRUCTION

1. USB-C Charging Port

2. Power Switch/ Mode Button

3. Select Button

4. OLED Display

5. Adjustment Button +

6. Adjustment Button –

7. ¼ Threaded Mounting Lug
   ** Display Interface**

8. Battery Capacity

9. Mode Selected CCT

10. Mode Selected HSI

11. Mode Selected Effect

12. Color Temperature Display (CCT)

13. Brightness Display (CCT)

14. Color Hue (HSI)

15. Color Saturation (HSI)

16. Scenario Effect Group (Effect)

17. Effect Name (Effect)
    

NOTES ON TEMPERATUR WARNING

• Kathi Nano Pro RGB Light is used in an environment with a high ambient temperature, or if the product is used continuously for a long period of time. This will automatically turn of the product until it cools down.
• Kathi Nano Pro RGB Light is used in an environment with a low ambient temperature. In such environments, the product may not operate properly.

USAGE

• Turning Power On / Off:
  Press Power button to power On I Off the LED.

• Mode Selection:
  Press Mode button to change mode between CCT /HSI/ EFFECT.

CCT Mode

1. Turn Brightness knob to set the desired brightness level from 1% -100%.
2. Turn Select/ Adjustment knob to set the desired color temperatu­re from 2500K -9900K.

   ---

HSI Mode

• Press Select / Adjustment knob to select between H (Hue) and S (Saturation).
• Turn Select / Adjustment knob to set the desired Color Hue from0-360 °
• Turn Select/ Adjustment knob to set the desired Color Saturation from0-100 .
• Turn Brightness knob to set the desired brightness level from 1%-100%.

  ---

EFFECT Mode

• Press Select / Adjustment knob to select Scenario Effect Group from A-G.
• Turn Select/ Adjustment knob to set the desired Scenario Effect Each group has 3 different effects and will display the effect name onOLED.
• Tum Brightness knob to set the desired brightness level from 1%-100%.

Scenario Effect List

• Group k. Flash / Flash Fast/ lV screen
• Group B: Candle / Flame 1 / Flame 2
• Group C: Police /Ambulance/ Fire truck
• Group D: Strobe Lights 1 / Strobe Lights 2 / Strobe Lights 3 Group E: Chase slow/ Chase mid / Chase fast
• Group F: Firework 1 / Firework 2 / Firework 3
• Group G: Club 1 / Club 2 / Romantic

CHARGING

The Kathi Nano Pro RGS light will charge from 5V USS-C Input.

• Attach the appropriate cable to the product.
• Attach the cable to a USB power source.
• The OLEO display will display flashing battery icon while being charged. Charging time varies depending on power source.

NOTE
Max brightness will be limited at 60%, if power button on product power while charging.

INSTALATION

Cold Shoe Adapter installation

• Align the Cold Shoe Adapter with the threaded lug on Kathi Nano Pro RGB Light
• Turn the lock screw clockwise to attach the Adapter to the Kathi Nano Pro RGB Light.

Mounting on a camera / Cold Show/ light Stand

• Turn off the LED Light.
• Slide the Cold Shoe adapter into a camera Hot Shoe or Cold Show mount.
• Turn the locking ring clockwise to secure the adapter.

Removing from a cam era / Light Stand

• Turn off the Kathi Nano Pro RGB Light
• Turn the locking ring counterclockwise and remove.

SPECIFICATION

WASTE MANAGEMENT

****The crossed-out trashcan symbol means that waste electrical and electronic equipment, batteries and packaging must not be placed with other household waste. They must be handed over to a separate waste collection system.

WARRANTY

****Newell products are covered by a 40–month manufacturer’s warranty.

Made in China

Documents / Resources

| Newell Kathi Nano Pro LED Light [pdf] User Manual
Kathi Nano Pro LED Light, Kathi Nano Pro, LED Light, Light
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>