BERTAZZONI HK36HERFDBXV 36 Inch Built In French Door Refrigerator Instruction Manual
- June 12, 2024
- Bertazzoni
Table of Contents
BERTAZZONI HK36HERFDBXV 36 Inch Built In French Door Refrigerator
Product Information
The product is a kitchen appliance with the model number 3070992-revA. It is designed to be installed on custom cabinets and comes with four pieces of handle A, four pieces of handle B, and one piece of handle C. The product is compatible with Bertazzoni handles.
Product Usage Instructions
To install the product on custom cabinets with Bertazzonihandles, follow these steps:
- Identify the custom cabinet panel where you want to mount the appliance.
- Ensure that the custom panel is suitable for mounting the product.
- Obtain brass tapping inserts specifically designed for securing the handle on the custom panel.
- Locate the appropriate positions on the custom panel where the handles will be attached.
- Using a suitable tool, install the brass tapping inserts in these positions.
- Attach handle A to the designated locations on the custom panel by aligning the holes in the handle with the brass tapping inserts.
- Repeat step 6 for the remaining three handle A pieces.
- Attach handle B and handle C to their respective designated locations on the custom panel using the same method described in step 6.
- Ensure that all handles are securely fastened to the custom panel.
Following these instructions will allow you to properly install and secure the Bertazzoni handles on your custom cabinet panel for optimal usage of the product.
OVERVIEW
HANDLE INSTALLATION ON CUSTOM CABINETS
In case a custom cabinet panel is to be mounted on any of the models listed below with Bertazzoni handles,it will be necessary to install brass tapping inserts in order to secure the handle properly on the custom panel.
SUGGESTED HANDLE INSERT FOR PANELS
- M5 x 0.8 MM BRASS TAPPING INSERTS
- Recommended drill bit size to drill the pilot hole is 3/8″
- Suitable inserts can be ordered at www.encompassparts.com.
- Part Number: 95631A100, contains n°4 M5 brass hardwood inserts and 1 M5 installation bit Do not use a power tool to mount the inserts. Installation of the inserts with improperly calibrated power tools risk damaging the panels.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>