COMMSCOPE SSH-710, SSH-1014 SnapTak Adjustable Cable Hanger Instruction Manual
- June 12, 2024
- CommScope
Table of Contents
COMMSCOPE SSH-710, SSH-1014 SnapTak Adjustable Cable Hanger
Product Information
The SnapTak hanger is a cable management tool offered by CommScope Infrastructure Academy. It is designed to securely hold cables in place and ensure proper installation. The hanger features two main support members and six guide pins. The main support members engage the cable, while the guide pins help center the cable. It is compatible with both metal and polymer SnapTak hangers from CommScope. CommScope provides a hanger selection calculator and a hanger spacing guide for convenience. These resources can be accessed on their website at https://www.commscope.com/SnapStak/.
Part Information for Available Hangers:
| Part Number | Stackability | Cable Diameter Range (mm) |
|---|---|---|
| SSH-47 | 3 | 4.00 min to 7.00 max |
| SSH-710 | 3 | 7.10 min to 10.00 max |
| SSH-1014 | 3 | 10.10 min to 14.00 max |
| SSH-1416 | 3 | 14.10 min to 16.00 max |
Product Usage Instructions
- Ensure that you have received the correct SnapTak hanger for your cable diameter. Refer to the part information table for the appropriate part number.
- Position the SnapTak hanger near the desired installation location.
- Place the cable in the channel area of the hanger.
- Press the hanger onto the cable until it centers in the channel.
- If using larger cables, the guide pins may snap off. This is normal and does not affect the functionality of the hanger.
- For polymer SnapTak hangers, they can be snapped into any other CommScope metal or polymer SnapTak hanger size.
For additional assistance or support, you can contact CommScope’s customer service through the following channels:
- Customer Service Hotline (North America): +1-800-255-1479 (toll free)
- Customer Service Hotline (International): +1-779-435-6500
- Email: [email protected]
Note:
Visit commscope.com or click QR codes above for hanger selection and hanger spacing resources.
Hanger selection calculator:
https://www.commscope.com/SnapStak/
Hanger specification and hanger spacing guide:
https://www.commscope.com/Product-Catalog/Tools-and-Accessories/Product
/Coaxial-Tools,Consumables-and-Accessories/
Customer Service 24 hours
North America: +1-800-255-1479
(toll free)
Any country: +1-779-435-6500
email:
[email protected]
CommScope
1100 CommScope Place SE P.O. Box 339,
Hickory, NC 28603-0339 (828)
324-2200 800-982-1708
www.commscope.com
Notice: CommScope disclaims any liability or responsibility for the results of improper or unsafe installation, inspection, maintenance, or removal practices.
© 2018 CommScope Bulletin 7819892 Rev. C