Bebe Stars KBH305 Car Seat User Manual

: June 12, 2024
: Bebe Stars

Table of Contents

Bebe Stars KBH305 Car Seat
Product Information
SAFETY NOTES
KNOW YOUR CHILD CAR SEAT
ASSEMBLY
INSTALLATION GUIDE
FOLDING & STORAGE
MAINTENANCE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Bebe Stars KBH305 Car Seat

Product Information

Product Name: Bebe Stars Safety Car Seat
Model Number: 930 (KBH305)
Group: 1/2/3 (9-36kgs)
Standards: ECE R44/04

Thank you for purchasing this safety car seat by Bebe Stars. We will always give you the best products and service. Please read the user manual before you use!

SAFETY NOTES

WARNING

Read this instruction manual carefully. We advise you strongly not to use an unlicensed or modiﬁed or without manufacturer’s instruction product, it is very dangerous.
This is a “Universal” child restraint approved to ECE R44/04. It can be installed by Vehicle Seat belt separately. It is for general use in vehicles and it will ﬁt most, but not all car seats.
The straps holding the restraint to the vehicle should be tight, any straps restraining the child should be adjusted to the child’s body and should not be twisted.
Make sure the lap belt is stretched as low as possible over the child’s hips. DO NOT use any load bearing force points other than those described in the instructions and marked in the child restraint.
For the future use of the seat, it is important that you keep the instruction manual carefully. If in doubt, please contact the manufacturer.
NEVER leave your child una ended in a car even for a short me.
We do not recommend installing the child safety seat in the front passenger seat.
DO NOT use a child safety seat if the vehicle seat is equipped with front airbags, it can be dangerous. This does not apply to so-called side airbags.
It is recommended that the car seat should not be used more than 10 years from the date of produc on. The proper es of the products may deteriorate due to, for example, ageing of the plastic wich may not be visible.
DO NOT use a child safety seat that has been in a crash. A crash can cause damage to the child safety seat that you can not see.
DO NOT modify or attempt to modify the child safety seat in any way.
DO NOT take apart or attempt to take apart this child safety seat etc.
DO NOT use a child safety seat with damaged or missing parts.
DO NOT change the cover or harness, they are the important components.
The moving parts of the car seat should not be lubricated in any way.
No altera ons should be made to the product as this could aﬀect part or the overall safety of the seat.
DO NOT remove the product’s label. There are important no ces on labels. Tell your child that he/she should never play or adjust with the seat.
We advise you strongly not to use a second-hand product, because you are not sure what has happened to it.
DO NOT place the seat on the edge of counter top or a soft surface like mattress, the seat may fall and hurt the child.
Make sure all foldable passenger seats are ﬁt in place.
Make sure there are no dangerous or corrosive substances in the car, which may damage the seat.
Make sure that all luggage and objects likely to cause injury in the event of an accident are properly secured.
The rigid items and plas c parts of a child restraint must be located and installed so that they are liable, during everyday use of the vehicle, to become trapped by a movable seat or a door of the vehicle.
Make sure the seat is in a safe position. Do not put any sharp or hard items around the seat.
Make sure that there are no other items in the clothes or pockets between the child and the seat belt, as this may cause injury in an accident.
Make sure the vehicle belt is tightly secured and the car seat is correctly installed each me you use it.
Make sure that the vehicle belt is correctly fastened and does not get stuck in the car door or other sharp objects, as it may be damaged. Please replace the vehicle belt if it is damaged.
Keep the child in the car seat at all times while the car is moving.
NOTICE: The seat must be secured in the car, even when it is not on use. An unsecured seat may injure other passengers in the car in an sudden stop. Always check whether the seat parts are complete and the seat belt is fastened correctly before each use.
DO NOT use with 2-point belt. Please install with the 3-point belt.
ONLY use for Forward Facing.

KNOW YOUR CHILD CAR SEAT

$Bebe-Stars-KBH305-Car-Seat- $1$$

Headrest folding switch (under the cover)
Shoulder belt guide
Buckle
Adjuster (under the cover)
Headrest
Backrest
Soft pads
Waist cushion
5-point harness
Buckle cover
Harness adjuster strap
Headrest adjustment handle
Seat belt guide
Belt hook
Folding button
ISOFIX connector
Seat belt guide
Handrail
Handrail release switch
ISOFIX unlock button
ISOFIX insertion guides

ASSEMBLY

Make sure the folding bu ons on the lower back place of the backrest are facing inwards and lift the backrest upright un l it snaps in place. A click sound and the folding bu ons facing outwards will indicate the seat is securely open. $Bebe-Stars-KBH305-Car-Seat- $2$$
Retract the sides of the headrest un l you hear a click sound.
Install the handrails on both sides of the car seat. The release switch will appear on the down side when it is ﬁxed.
Pull the lever on the headrest adjustment handle and pull the headrest up or push down to set the headrest height according to your child’s height. The seat belt guide on the headrest should be two ﬁngers up from the child’s shoulder.

SETUP OF 5-POINT BELT

The height of the shoulder belts must be in accordance to your child’s shoulder height. It must not be lower than the shoulders or too high. $Bebe-Stars-KBH305-Car-Seat- $7$$
To setup the belts properly, ﬁrst slacken the straps using the adjuster bu on. Unbuckle the straps from the belt hook on the back and pull the straps oﬀ the seat. Choose the appropriate height, reinsert the straps in the seat and buckle them back on the belt hook on the back of the seat. $Bebe-Stars-KBH305-Car-Seat- $8$$

Using the buckle. $Bebe-Stars-KBH305-Car-Seat- $9$$

Lock: Align and connect the two parts of the buckle on the straps and insert them into the main buckle part un l you hear a click sound.
Unlock: Push the middle buckle bu on to release the parts and le the straps loose.

INSTALLATION GUIDE

Group 1 | 9-18kg
Installation with 3-point car seat belt. $Bebe-Stars-KBH305-Car-Seat- $10$$

Place the seat belt through the top seat belt guide (1) and under the armrest (2).
Guide the belt through the backrest hole (3) and bring it back forward through hole (4).
Pass the belt under the armrest (5) and fasten it in the car’s buckle.
Place the child on the seat and secure it with the 5-point harness.

Group 1 | 9-18kg
Installation with 3-point car seat belt + ISOFIX. $Bebe-Stars-KBH305-Car-Seat- $11$$

Press the ISOFIX unlock buttons and retract the connectors.
Place the ISOFIX insertion guides on the vehicle’s seat hooks, located between the backrest and the seat.
Guide the ISOFIX connectors through the insertion guides until they clamp on the hooks.
Push the child’s seat towards the vehicle seat to secure the ISOFIX connec on.
The ISOFIX unlock bu ons must turn into green indica on. If the indication is still red, repeat the above process. $Bebe-Stars-KBH305-Car-Seat- $12$$
Place the seat belt through the top seat belt guide (1) and under the armrest (2).
Guide the belt through the backrest hole (3) and bring it back forward through hole (4).
Pass the belt under the armrest (5) and fasten it in the car’s buckle.
Place the child on the seat and secure it with the 5-point harness.

Group 2/3 | 15-36kg
Installation with 3-point car seat belt.

Remove the 5-point harness system, the crotch pad and the waist cushion from the child’s car seat.
Place the child’s seat on the vehicle’s seat.
Place the child in the car seat.
Guide the shoulder strap of the car’s seat belt through the seat belt guide (1), the waist strap under the armrest opposite to the buckle (2) and the buckle under the armrest (3).
Fasten the seat belt and make sure the child’s seat with the child are secure by shaking the car seat.

Group 2/3 | 15-36kg
Installation with 3-point car seat belt + ISOFIT. $Bebe-Stars-KBH305-Car-Seat- $16$$

Press the ISOFIX unlock buttons and retract the connectors.
Place the ISOFIX insertion guides on the vehicle’s seat hooks, located between the backrest and the seat.
Guide the ISOFIX connectors through the insertion guides until they clamp on the hooks.
Push the child’s seat towards the vehicle seat to secure the ISOFIX connec on.
The ISOFIX unlock bu ons must turn into green indica on. If the indication is still red, repeat the above process.
Remove the 5-point harness system, the crotch pad and the waist cushion from the child’s car seat.
Place the child’s seat on the vehicle’s seat.
Place the child in the car seat.
Guide the shoulder strap of the car’s seat belt through the seat belt guide (1), the waist strap under the armrest opposite to the buckle (2) and the buckle under the armrest (3).
Fasten the seat belt and make sure the child’s seat with the child are secure by shaking the car seat.

IMPORTANT NOTE

This car seat is suitable for children weighing 9-36kg.
The seat is in accordance with ECE R44/04 regulation.
Please install the car seat according to the manual and stickers on the car seat.

The child seat is only suitable for use if the approved vehicles are ﬁ ed with 3-point safety belts, approved to ECE R16 standards. When using the child seat on a rear seat, move the passenger seat as far forward as possible. $Bebe- Stars-KBH305-Car-Seat- $20$$

FOLDING & STORAGE

$Bebe-Stars-KBH305-Car-Seat- $21$$

Press the hidden buttons on the sides of the headrest and ﬂip the sides towards the middle of the headrest.
Push the handrail release switch and pull the handrails to remove them.
Pull the folding buttons on the back of the seat inwards to unlock the hinge and push the backrest towards the seat to completely fold the car seat.

REMOVE THE FABRIC COVER $Bebe-Stars-KBH305-Car-Seat- $22$$