Bebe Stars 821 Freedom 3 In 1 Petrol Tricycle User Manual
- June 12, 2024
- Bebe Stars
Table of Contents
Bebe Stars 821 Freedom 3 In 1 Petrol Tricycle
PRODUCT INFORMATION
PARTS LIST
- Handlebar
- Cup holder
- Front-wheel
- Parent handle
- Frame
TRICYCLE ASSEMBLY INSTRUCTIONS
**BALANCE BIKE INSTRUCTIONS
**
HOW TO FOLD THE TRICYCLE
SAFETY INSTRUCTIONS
Thank you very much for buying this product, before it’s use, please read the instructions carefully, according to the specifications safe use and keep for future reference.
WARNINGS
- Age range 1.5 – 5 years (Limit weight 25 kgs).
- Guardians are responsible for assembling, disassembling or adjusting to avoid damage.
- Handle, footrest and harness system are the subsidiary appliances for the baby who can’t independently ride. If the baby can independently use, be sure to disassemble these subsidiary appliances.
- Dangerous activities are forbidden when use this product and it is easy to fall if the baby stand on the seat or handle behind the footrest.
- Don’t use it on mountain slope or uneven road.
- Don’t use it on heavy traffic road.
- Please keep it in place which is not rain-drenched and sun-scorched.
- Don’t modify the type of model.
- Handle should be controlled by the guardians, especially when the child gets or or off the tricycle.
- The plastic bag contained with parts should be placed beyond the baby’s reach
- The tricycle is prohibited to carry two or more children.
- Never leave your child unattened.
WARNING: Never leave your child unattended!
3 IN-1 TRICYCLE ASSEMBLY INSTRUCTIONS
- First, insert the front wheel in the corresponding hole on the frame. (Figure 1)
- After that, insert the handlebar into the upright tube of the front wheel (Figure
- Then assemble cup holder on the front of the frame (Figure 3).
- Press button B1 and take out pedals (Figure 4). Press button B2 and insert pedals into second gear, please make sure that pedals do not turn with the wheels. (Figure 5)
3 IN-1 TRICYCLE ASSEMBLY INSTRUCTIONS
- Take out the metal connecting rod upward (Figure 6).
- Press the upper button B3 and open the left frame, repeat for the right frame by pressing the lower button B4 (Figure 7).
- Assemble the metal connecting rod on between C1 and C2. (Figure 8)
- Press button B5 and turn the wheels outside. (Figure 9)
- Finally, insert parent handle on the back of the frame (Figure 10). The tricycle is completed. If you want to turn it into a bicycle, simply remove the parent’s handle.
BALANCE BIKE ASSEMBLY INSTRUCTIONS
- Remove the metal connecting rod upward (Figure 1).
- Press button B5 and turn wheels to the inside. (Figure 2)
- Press the upper button B3 and close the left frame, repeat for the right frame by pressing lower button B4 (Figure 3). Assemble the metal connecting rod on between C3 and C4. (Figure 4)
- Finally, press button B2 and take out pedals (Figure 5). Press button B1 and insert pedals as Figure 6 shows.
- The balance bike is completed.
HOW TO FOLD THE TRICYCLE
- Press button A1 as Figure 1 shows and remove the parent’s handle.
- After that pull button A2 upward and fold the handlebar. (Figure 2)
- Finally, press buttons A3 and A4 on both sides of the frame as Figure 3 shows and now you can fold the frame (Figure 4).
CARE & MAINTENANCE
To avoid your child being hurt, you should often check and maintain the tricycle.
- Please clean the tricycle directly, using dry cloth to wipe clean.
- Regularly check whether there are screws loosed or parts damaged, if necessary please replace the damaged parts.
- Dismantle please carefully according to the operating instructions, so as to avoid unnecessary damage.
- Avoid overload operation.
- For transmission parts such as shaft and handlebar shaft, is necessary to add silicone spray to improve the service life of the product.
Thank you for choosing Bebe Stars products
FOLLOW US
www.bebestars.gr
- Instagram: @bebestarsbygilis
- Facebook:@bebe.stars ****
- Youtube: bebestarsbygilis
- Address: 63200 Nea Moudania, Greece
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>