marta MT-HD1408A Hair Dryer User Manual
- June 12, 2024
- MARTA
Table of Contents
marta MT-HD1408A Hair Dryer
Product Information
The HAIR DRYER model MT-HD1408A and MT-HD1408B are equipped with the following features:
- Concentrator
- Air inlet
- Housing
- Handle
- Control switch
- Cool shot switch
Please note that the actual set of the appliance may differ from what is listed in the User Manual. It is recommended to check the product before purchasing.
Product Usage Instructions
Using the Cool Shot Function
The Cool Shot function allows for rapid cooling of hair and longer-lasting curls. To activate the Cool Shot function:
- Press and hold the Cool Shot button located in front of the handle.
- Release the Cool Shot button to return the appliance to its normal setting.
Using the Concentrator
The concentrator attachment is used for focused airflow and allows for drying and styling individual hair locks. Follow these steps to use the concentrator:
- Attach the concentrator to the hair dryer.
- Aim the concentrator at the desired section of hair.
- Move the concentrator along the hair shaft to dry and style the hair lock.
Description
- Concentrator
- Air inlet
- Housing
- Handle
- Control switch
- Cool shot switch
Precautions
CAUTION
Read the user manual carefully before using the appliance and save it for future reference.
- Before first use, check the appliance specification and power supply in your network. The appliance is not intended for industrial use. For indoor use only. Use only for domestic purpose according to the user manual. Do not use with damaged cord, plug or another injury. Keep the power cord away from sharp edges and hot surfaces. Do not pull the cord. Always take the plug. Do not reel the cord around the appliance housing. Never attempt to repair the appliance by yourself. If you meet problems, please contact customer service center.
- Using accessories or replacement parts which are not recommended or sold by the manufacturer may cause damage to the appliance.
- Always unplug the appliance and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
- To avoid electric shock and fire, do not immerse the appliance in water or other liquids. If that occurs, immediately unplug the appliance and contact service center for inspection.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible for their safety person.
- If the appliance overheats it switches off automatically. Then set the switch into position 0, unplug the appliance and wait until the appliance is completely cool down. Make sure that there are no hair, dust and other objects in air inlets.
- Blocked air inlets could cause appliance overheating. Please control that hair, dust and down don’t get into the air inlets.
- Don’t use the appliance in a bathroom and near water source to avoid electric shock.
- While the appliance is operating be careful with the concentrator – it could get hot. Don’t touch it.
USING THE APPLIANCE
- Unwind power cord. Set the concentrator on hair dryer. Plug the appliance in.
AIRFLOW CONTROL: To adjust thepower and temperatureof airflow, choose one of the modes.
- hot airflow
- warm airflow
- cool airflow
- hairdryer is off
COOL SHOT
This appliance is featured with “Cool shot” function, which allows rapid cooling of hair and longer lasting curl. To activate “Cool shot” function, simply press the Cool shot button in front of the handle. As the Cool shot button is released, the appliance returns to its normal setting.
CONCENTRATOR
- The concentrator is used for focused airflow and allows you each hair lock drying and styling.
IONIC FUNCTION
- flow of negative ions and antistatic effect for easier hair comb-out, makes your hair shiny and healthy.
CLEANING AND MAINTENANCE
Unplug the appliance before cleaning. Let the appliance cool down. Clean the appliance housing with wet cloth. Take the concentrator off and rinse it in warm soapy water. Do not use chemical and abrasive cleaners for cleaning. Wipe the housing and the concetrator with smooth dry cloth. Let the appliance cool down. Make sure that there is no water on the appliance surface. Don’t reel the cord on the appliance housing. That may cause cord damage. Store the appliance in dry cool place.
SPECIFICATION
- Power supply: 230 V ~ 50 Hz
WARRANTY
WARRANTY DOES NOT COVER CONSUMABLES (filters, ceramic and non-stick coating, rubber seals, etc.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters indicate the month, the 6th and 7th indicate the year of device production. Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device.
Producer
- Cosmos Far View International Limited
- Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo, China
- Made in China
- http://multimarta.com/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>