Bebe Stars HA-038 Meal 2 In 1 Grey Dining Chair User Manual
- June 12, 2024
- Bebe Stars
Table of Contents
Bebe Stars HA-038 Meal 2 In 1 Grey Dining Chair
PARTS LIST
- 1. Seat
- 2. Tray
- 3. Seat pad
- 4. Restrain System
- 5. Leg connectors (x2)
- 6. Rubber feet (x4)
- 7. Upper legs (x4)
- 8. Bottom legs (x4)
- 9. Storage bag
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS FOR USE
SAFETY INSTRUCTIONS
Thank you for purchasing this high chair by Bebe Stars. We will always give
you the best products and service .
Please read the user manual before you use!
IMPORTANT: KEEP FOR FUTURE REFERENCE
- Suitable for children who are able to sit up unaided (6-36 months).
- Maximum weight supported is 20kgs.
To ensure safe, trouble free use, please take a little time to read the important safety notes below and the following instructions.
- WARNING: Do not use if any part is broken, torn or missing.
- WARNING: Do not use the highchair when the child can stand up unaided. WARNING: Do not use the highchair unless you check that all components are correctly fitted and adjusted.
- WARNING: Do not leave your child unattended, even for the shortest time. WARNING: To prevent serious injury or death from falls or sliding out, ensure the harness is correctly fitted and that the child is secure in the restraint. Always secure your child with the 5 point seat belt.
- WARNING: Avoid placing the highchair near naked heat sources such as stove, gas fires or high temperatures.
Ensure all users are familiar with the products operation.
- It should always open and fold easy. If it does not, do not force the mechanism -stop and read the instructions.
- Only use on a flat stable surface.
- Ensure your highchair is fully erected before placing your child inside.
- Ensure children are clear of all moving parts before making any adjustments.
- Do not move the highchair with your child inside.
- Do not allow your child to climb unassisted into, play with or hang onto your highchair.
- This is not a toy.
- Complies with European Standards EN 14988:2017+Al:2020.
WARNING!!!
Never leave your child unattended!
ASSEMBLY INSTRUCTIONS
- lnsert the 4 upper legs into the seat. (Figure 1)
- Install the leg connectors as the Figure 2 shows. Make sure that the curved side of each leg connector is facing outward.
- Insert the 4 bottom legs as Figure 3 shows into the leg connector. Make sure that the brackets are fixed.
- Attach the 4 rubber feet at the bottom of legs. After, slide the food tray on the seat and install the storage bag. (Figure 4)
- Put the seat pad onto the seat, then insert the safety belt through the seat pad and the corresponding holes of the seat. The high chair is complete. (Figure 5)
INSTRUCTIONS FOR USE
- Use the adjustment button (lb) which is located at the back of the seat to adjust at the desired position. (Figure 1)
- To turn the high chair into a play chair, remove the 4 bottom legs along with the 2 leg connectors and the storage bag. Then, install the rubber feet into the upper legs. (Figure 2)
- To fold the high chair, pull the lever (3c) located under the food tray to remove it and then pull up the levers (3d) on both sides of the seat to complete folding. (Figure 3)
CARE & MAINTENANCE
- Seat pad-Wipe clean with wet cloth and let dry. Removable chair pad.
- Tray-Dishwasher safe. Wipe clean with a soft, clean cloth and mild soap.
- Frame-Wipe clean with soft, clean cloth and mild soap.
- Restraints System-Wipe clean with wet cloth and let dry.
FOLLOW US
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>