klipxtreme KPP-003 Wireless Presenter User Manual

: June 12, 2024
: KlipXtreme

Table of Contents

klipxtreme KPP-003 Wireless Presenter
Introduction
Main features
System requirements
Product overview
Description of functions
Connecting the presenter to the computer
Troubleshooting
FCC statement
Disposal
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

klipxtreme KPP-003 Wireless Presenter

klipxtreme-.KPP-003-Wireless-Presenter-product

Introduction

Thank you for purchasing the KPP-003 Wireless Presenter from Klip Xtreme. This device will come in handy when you need to stand out in the way you make your presentations. It features an ergonomic design and intuitive touch keys that will let you have complete control of your slide show. Its powerful red laser will efficiently highlight those important points of the presentation, within a range of up to 656 feet, so you have freedom to move around and interact with your audience. All you have to do is connect the USB receiver to your computer, turn on the presenter and get the job done professionally and efficiently.
We invite you to visit us at www.klipxtreme.com to find out more about this and other new and exciting products.

Safety measures

LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS III A LASER PRODUCT. NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY. AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES, MOMENTARY EXPOSURE FROM A LASER POINTER, SUCH AS AN INADVERTENT SWEEP OF THE LIGHT ACROSS A PERSON’S EYES, MAY CAUSE TEMPORARY FLASH BLINDNESS SIMILAR TO THE EFFECT OF A CAMERA FLASH BULB. ALTHOUGH THIS CONDITION IS TEMPORARY, IT CAN BECOME MORE DANGEROUS IF THE EXPOSED PERSON IS ENGAGED IN A VISION-CRITICAL ACTIVITY SUCH AS DRIVING.

Package content

Wireless presenter 1
USB receiver 1
AAA battery 1
User’s guide 1

Main features

Ideal for business presentations, project proposals and PowerPoint documents
Integrated laser pointer
Play, forward, backward, laser pointer, and volume up, down and mute buttons with ergonomic design
Compatible with the Windows® family and macOS
2.4GHz RF with 360-degree control and laser operating range of up to 328 feet*
USB nano receiver with storage in the battery compartment
Plug and Play configuration; software driver not required
Complies with laser safety standards – it supports less than 1mW of power
The remote operation distance is 50 feet.

System requirements

Hardware

USB Versions 1.1/ 2.0/ 3.0

Operating systems

Windows® 2003, XP, Windows Vista, Windows 7-11
macOS*
Certain limitations apply.

Product overview

Front view

Back view

Play
Escape
Page Up
Page Down
Page Up
Page Down
Laser Point
Volume Up
Blank Screen
Volume Down
Mute
Battery Indicator
On/off switch
Battery compartment

Description of functions

Play button: Use this button to start your presentation in show mode.
Escape button: Press this button the exit your presentation.
Page up button: Use this button to go to the next slide.
Page down button: Press this button to go to the previous slide.
Page up button: Use this button to go to the next slide.
Page down button: Use this button to go to the previous slide.
Laser point: Press it to activate the laser beam.
Volume up: Increase volume level.
Blank screen: This button will make the screen go black, in case you want to pause your presentation.
Volume down: Decrease volume level.
Mute: Use this button to go in silent mode.
Battery indicator: This light indicates the charge in your AAA battery.
On/off: switch: Use this button to turn this device on or off.
Battery compartment: Insert a AAA battery and store your USB nano receiver here when the presentation is over.

Connecting the presenter to the computer

Insert one AAA battery in the battery compartment.
Remove the USB receiver from the wireless presenter, located in the battery compartment. Turn on the presenter by sliding the on/off switch to its ON position.
Insert the USB receiver into the USB port of the computer.
Turn on your computer, if you have not done so already.
Note: The radio frequency (RF) codes are factory preset for your convenience; the presenter should be functional at this point.
No further configuration is necessary. Now you can start your presentations. Remember to put the USB receiver back into the wireless presenter and turn off the device when you are not using it.

Troubleshooting

If the presenter fails to work as expected, first verify the recommendations below have been followed:

The USB receiver is correctly connected to the computer.
The receiver is within communication range with the presenter (no more than 50 feet away, depending on location.)

Technical specifications

Device	KPP-003
Type	2.4G Wireless Presenter
Technology	Radio Frequency (RF)
Laser distance	About 328 feet

Laser pointer

wavelength

| Red λ=650nm
Laser Class| Class III A
Laser power| <1mW
Working voltage| 4.25~5.25V
Operating System

compatibility

| Windows family up to Windows

10/11 and macOS*

Connectivity|
Connection type| Wireless mini dongle USB
Wireless RF

frequency

manual

Warranty| 12 months

*Certain limitations apply.

FCC statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user´s authority to operate this equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Disposal

Electrical and electronic products must not be discarded as regular household waste! As part of the company’s eco-friendly approach, we encourage you to follow all applicable local waste regulations to dispose of your used electronics properly.

KlipXtreme® is a registered trademark. All rights reserved. All other brand names and trademarks are the property of their respective owners. Any mention of such is only intended for identification purposes, and therefore shall not be construed as a claim to any or all rights pertaining to those brands. Made in China.

www.klipXtreme.com