J-TECH DIGITAL JTD-2994 HDMI Over Ethernet Extender User Manual

: June 12, 2024
: J-TECH DIGITAL

Table of Contents

J-TECH JTD-2994 HDMI Over Ethernet Extender
Product Information
Features
Specifications
Package Contents
Panel Description
Connecting and Operating
Typical Application
Maintenance
Warranty
Mail-In Service
Limited Warranty Limits and Exclusions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

J-TECH JTD-2994 HDMI Over Ethernet Extender

$J-TECH-DIGITAL-JTD-2994-HDMI-Over-Ethernet-Extender $2$.$

Product Information

Product Name: JTD-2994 | JTECH-EX100M2
Manufacturer: J-TECH DIGITAL INC.
Address: 9807 Emily Lane, Stafford, TX 77477
Contact Information: Tel: 1-888-610-2818, Email: support@jtechdigital.com

Features

Extends HDMI signal up to 328ft (100m) over single CAT5E/CAT6.
The highest video resolution is 1080P 60Hz (YUV444).
HDMll.4, HDCPl.4.
Supports infrared extension transmission control.
H.265 encoding, low bandwidth and high image quality.
Low power consumption, less than 2w

Specifications

Operating Temperature Range -20°C – 70°C
Operating Humidity Range 5 – 80% RH (No Condensation)
Input Video Signal 0.5 – 1.0V p_p
Input DDC Signal 5V p-p (TTL)
Supported Video Format TV: 1920 x 1080P 60/50/30Hz; 1280 x 720
- 60/50Hz; 1080i 60Hz
- PC: 1920x 1080; 1600x 1050; 1600x
- 900; 1440 X 900; 1400 X 1050; 1360 X
- 768; 1280 X 720; 1024 X 768
Video Output HDMI
Transmission Distance 328ft. (100m) over Cat5e/6
Power Consumption Transmitter: 2W (Max)
Receiver: 2W (Max)
IR Frequency 8 – 56kHz
Dimensions (L x W x H) 130mm x 75mm x 28mm
5.12″ X 2.95″ X 1.10″
Net Weight Transmitter: 0.5llbs.
Receiver: 0.51 lbs.
Transmitter IP Address; 192.168.101. 110 {MAC Address: Not Fixed)
Receiver IP Address; Not Fixed {MAC Address: Not Fixed)

Package Contents

(1) x Transmitter
(1) x Receiver
(2) x DC 12V/1A Power Adapters
(1) x IR TX Cable
(1) x IR RX Cable
(1) x User Manual

Panel Description

Transmitter Panel

Indicator of power input
Status of signal connection
Reset button
Power input port
HDMI input
Ethernet port
IR-TX port

Receiver Panel

Indicator of power input
Status of signal connection
Reset button
Power input port
HDMI output
Ethernet port
IR-RX port

Connecting and Operating

Follow the steps below to connect and operate the product:

Connect the HDM I signal source (Such as DVD, STB etc.) to HDM I Transmitter.
Connect CAT5e or 6 cables to both the Ethernet of the transmitter and Ethernet port of the Receiver. (The cables must follow the standard of EIA-TIA 5688).
Connect the HDMI display (Such as HD-LCD, HD-DLP) into the Receiver.
Connect the power supply into Power port.
Connect the IR TX receiving cables into IR TX port on the back panel and affix the emitter onto the source IR windows.
Connect IR-RX cable into IR-RX port on the receiver and affix the IR receiver in direct line of site with the handheld remote control. It is recommended to affix the receiver on the display frame /bezel or the display stand.

Typical Application

One to One $J-TECH-DIGITAL-JTD-2994-HDMI-Over-Ethernet-Extender $6$$
One to more $J-TECH-DIGITAL-JTD-2994-HDMI-Over-Ethernet-Extender $7$$

Note : Connect HDMI Transmitter port and Receiver ports to the Ethernet Switch

Maintenance

Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner, or benzine to clean.

Warranty

If your product does not work properly because of a defect in materials of workmanship, our company (referred to as “the warrantor”) will, for the length of the period indicated as below, “Parts and Labor (1) Year”, which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor. During the “Labor” limited warranty period, there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must mail-in your product during the warranty period. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty service

Mail-In Service

When shipping the unit, carefully pack and send it prepaid, adequately insured, and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone and/or email address where you can be reached.

Limited Warranty Limits and Exclusions

This Limited Warranty ONLY COVERS failures due to defects in material or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, mis- adjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory Service center or other Authorized Servicer, or damage that is attributed to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTAIL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF TH IS WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images, data or other recorded content. The items listed are not exclusive, but are for illustration only.) PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.

Contact Information