Blackview Active 8 Series Tablet PC User Manual
- June 12, 2024
- Blackview
Table of Contents
Active 8 Series
Follow Blackview communtiy, a place where you can share and ciscuss with Blackview user keep posted vith most up to-day news
Hand Strap Installation
- Fit the screws pre-installed on the two ends of the hand strap into the nut on the back of the tablet
- Use screw diver to tighten the screws and then the installation Is done.
How to insert the card
To make sure your smartphone be able to cal, put the SIM card in the following order
- Open the SIM card plug.
- Press the card pin into the side hole and then the card tray pops up and pull out i
- Take out the card slot and place the Nano card or Nano card and TF card with the metal side facing down. Make sure the bevel angle s aligned with the bevel angle of the card slot and placed in the corresponding card slot.
- With the pad facing up, insert the card holder into the padin the direction of the arrow.
How to boot
Non-removable battery
Press the power button for 3-5 seconds toboot
How to send SMS, MMS
SMS
-
Open the SMS app.
-
Select New Informatian
-
Enter a phone number or browse your contacts
-
Select Edit Information and enter your text
-
Send
MMS – video -
When wiiting a text message
-
Selectimages, videos or other files you want to add, even You can take a new picture or video right away.
-
Selecting or sending
Language switching settings
- Main menu-settings-system setting- language and input method
- Language and input method-language-language adding
- Select the language you need; the system will automatically jump back to the language interface
- Select the icon after the language bar and drag it to the firstone.
SAR
- The maximum electromagretic radiation absorption ratio (SAR) of this product is s2.0W/kg.
- Inline with the requiremens of the national standard GB 21288-2007.
Safety- In order to ensure safely using the product, you must strictly abide by the following rules
- The pad should be at least 15 cm away from any medical implant or thythm adjuster and never put the device in your coat pocket
- Do not expose the device and other batteries together with the high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens or water heaters. Overheating of the battery can cause an explosion
- When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the power outlet.
- If the device is equipped with & non-removable battery, do not replace the battery yourselfto avoid damaging the battery o device.
- Use of an unapproved or incompatible power source, charger or battery may cause fire, explosion or other hazards.
- Do not disassemble o reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage, overheating, fire or explosion.
- Do not drop, crush, scratch or puncture the battery to avoid subjecting the battery to excessive external pressure, resulting in internal short-circuit and overheating of the battery.
- The company does not bear the responsibility for accidents caused by non-standard related charging equipment.
- Ifyou want to read the full CE accompliance, please check this link: http://www.blackview.hk/ce/
Maintenance
-
Thoroughly understand the maintenance of this pad to use the pad more safely and effectively, and extend the service life of the pad as m.ich as possible.
-
Please follow the instructions in the manual to open the pad, disassemble the accessories, and do not try other methods.
-
Please avoid falling, knocking or shaking your pad. Rough handling of the pad can cause the screen to rupture, damaging the internal circuit board and the delicate structure
-
Do not use chemical solvents or detergents to clean your pad. Wipe the pad case with a soft cotton cloth dampened with water or a mild soap.
-
Clean the lens with a clean, dry, soft cloth.
(Example: camera lens) and display. -
If you encounter an abnormal image such as a crash during use, the processing method is as follows: For a pad that cannot remove the battery, please press and hold the power button for more than 12 seconds, the pad will be forced to restart (unlock th2 pad when restarting) It can solve the general bug; for the pad that can remove the battery, please remove the battery, then insert the battery and restart it to solve the bug.
-
When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause hamful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause hamful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help important announcement
Radiation Exposure Statement:
SAR Statement for Monitor
Specific Absorption Rate (SAR) information:
This device meets the government’s requirements for exposure to radio waves.
The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin designed
to assure the sa‘eg of all persons regardless of age or health. RF Exposure
Information and Statement the limit is 1.6 W/kg avera:ged over one gram of
tissue. Device types: tablet has also been tested against
this SAR limit. This device was tested for typical -worn operations with the
back of the tablet kept Omm from the body. To maintain compliance with Ri
exposure requirements, use accessories that maintain an Omm separation
distance between the user’s body and the back of the device . The use of belt
clips, holsters and similar accessories should not contain metallic components
in its assembly. The use of accessories that do not satisfy these requirements
may not comply with RF exposure requirements, and should be avoided.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>