FIAMMA 98683-059 Comfort-Tech Fan Instruction Manual
- June 12, 2024
- FIAMMA
Table of Contents
FIAMMA 98683-059 Comfort-Tech
Fan
Installation and usage instructions
TURBO-KIT
98683-059
COMFORT – TECH
Feeding tension: | 12 V |
---|---|
Absorbed power | 4 W |
Min. electric input: | 0,20 A |
Max electric input: | 0,33 A |
Max air flow: | 7,2 m³/min |
Fan diameter: | 240mm |
Check that nothing has been damaged or deformed during transport.
In the event of doubts or questions concerning the installation, use or
limitations of the product, contact the dealer. We recommend that the
installation is carried out by qualifi ed personnel and in compliance with
current local regulations.
For an easy installation of the ventilator, we recommend to install the fixing
brackets respecting the wheelbase indicated (31cm). Once established the
position of the brackets, fi x them with the screws standard delivered.
-
1. OPTION 1
-
- OPTION 2
- OPTION 2
-
OPTION 3
-
OPTION 4
POWER SUPPLY: the ventilator can work with a supply cable for lighter (see battery housing) or can be connected to the 12Vdc motorhome’s electric installation, that allows it to function as fan and aspirator, thanks to the manual system of supply polarity’s reverse. It is preset to work also with batteries Alkaline type LR20 (8 batteries of 1,5 V D, not supplied) (lasting 80 hours). Take away the batteries when ventilator is connected to the 12Vdc net.
Polarity inverter: from ventilator to aspirator
Fiamma declines all responsibility for any personal injury and damage to
property due to incorrect assembly or use of the product; it is suggested to
keep the instructions inside the vehicle.
The assembly of the product must be carried out according to the assembly
instructions: the product must not be modified in any way.
The ventilator must be installed with the fi xing brackets standard delivered
or using directly the sliding hooks on the rooflight’s frame. Other
installation systems could compromise its stability.
While travelling keep the Turbo-kit dismounted. If you need to oil the sliding
hooks use a silicone spray.
CARE AND MAINTENANCE: Never use aggressive products such as glass
cleaners, all-purpose cleaners, abrasives or dish-washing detergents. Also,
never use alcohol-containing detergents, solvents or any corrosive liquid.
Warranty Fiamma.
In case of defects with regards to materials and manufacturing, the customer
is entitled to the warranty in accordance with local laws and regulations of
the country in which the product was purchased.
EU Declaration of Conformity (DoC)
We,
Company name: Fiamma S.p.A.
Postal address: Via San Rocco, 56
Postcode and city: Cardano al Campo – (Varese)
Telephone number: 0311/709111
E-mail address: fiamma@fiamma.it
Declare that the DoC is issued under our sole responsibility and belongs to
the following product: Apparatus model / Product: Roof Light with fun
Trademark: Fiamma
Model /Type:
04919-01y | Turbo 28 |
---|---|
C4919-01y | Turbo 28 (Bulk Pack) |
07903-01- | Kit Turbo Vent 28 F |
07903-02- | Kit Turbo Vent 28 F |
C7902A0ly | Turbo 28 F (Bulk Pack) |
C7902A02y | Turbo 28 F (Bulk Pack) |
03623F01y | Turbo Vent |
03624F02y | Turbo Vent |
C3623G01y | Turbo Vent P3 (Bulk Pack) |
C3624G02y | Turbo Vent P3 (Bulk Pack) |
03623HOly | Turbo Vent Premium |
03624H02y | Turbo Vent Premium |
07501-01- | Kit Turbo Vent F Premium |
07501A01- | Kit Turbo Vent F |
07501B01- | Kit Turbo Vent F P3 |
98683-059 | Turbo Kit |
y = – White; B/D = Crystal
The object of the declaration described above is in conformity with the
relevant Union harmonisation legislation:
-
* 2014/30/EU Electro Magnetic Compatibility Directive (EMCD).
- 2014/35/EU Low Voltage Directive (LVD).
- 2011/65/EU Restriction of the use of certain hazardous substances Directive (RoHS Directive).
- ECE/ONU/R10 Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility – R10.
- ECE/ONU/R43 Uniform provisions concerning the approval of safety glazing materials and their installation on vehicles – R43 (only for Turbo 28, 28 F, Vent, Vent P3 and Vent Premium).
- EN 55014-1:2006 + A1:2009+ A2:2011 – RCM (only for Turbo 28, 28 F and Turbo Vent Premium).
- EN 61000-3-2:2014 – RCM (only for Turbo 28, 28 F and Turbo Vent Premium).
- EN 61000-3-3:2013 – RCM (only for Turbo 28, 28 F and Turbo Vent Premium).
- EN 55014-2:2015 – RCM (only for Turbo 28, 28 F and Turbo Vent Premium).
The following harmonised standards and/or technical specifications have been applied
Fiamma S.p.A. – Italy
Via San Rocco, 56
21010 Cardano al Campo (VA)
All rights reserved.
Fiamma S.p.A. reserves the right to modify at any time, without notice,
prices, materials, specifi cations and models or to cease production of any
model.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>