SAMSUNG 7170-0977 Series Outdoor Flat Tilt Wall Mount Installation Guide

SAMSUNG 7170-0977 Series Outdoor Flat Tilt Wall Mount Installation Guide

BASIC INFORMATION

• Wall mount model: 7170-0977-00 (flat) 7170-0977-01 (Tilt)

• Display Model: OH55

• Installation Configuration: Landscape Portrait

• Tilt feature: Available by model Fixed at flat, 5 deg, 10 deg , 15 deg

• Environment Temperature:
  Negative 30 Celsius to 50 Celsius, 24/7 operation
  Wall application: Solid concrete, Hollow Brick, or 3/4″ plywood-backed wall

• Product Weight:
  31.5 lbs [14.4 kg] for flat model
  45.5 lbs [20.6 kg] for tilt model

• OA Weight (Mount & Flat-Panel):
  147.5 lbs [66.9 kg] (flat)
  161.5 lbs [73.26 kg] (Tilt)

• OA Width x Depth x Height (Portrait): 28.8” x (5.55” flat to 17.33” tilt) x 50.87”

• OA Width x Depth x Height (Landscape): 49.63” x (5.55” flat to 14.62” tilt) x 30.38”

INSTALLATION ENVIRONMENT

Beach: Must not be placed in areas where seawater is accessible
Wind: Must not be placed in areas with strong winds caused by storms or other natural phenomenon
Snow: Awning or cover is needed to avoid snow piling directly onto inlet
Iron Dust: Suitable, (e.g. train or subway station)

ENCLOSED OR RECESS AREA

Clearance: 52mm (2.05”) minimum all around
Additional front glass: Prohibited in any enclosed area

CORE COMPONENTS

TILT ADAPTER (OPTION)

1/4-20” x 2-1/2” Button Head

1/4” Flat Washer

HARDWARE

• 1/4-20 x 5” Pan Head
  

• 1/4-20” x 3/4” Button Head
  

• 1/4” Flat Washer
  

• 5/16” x 3” Hex Lag
  

• 5/16” Split Lock Washer
  

• 5/16” Flat Washer
  

• Shell Expansion Anchor
  

• M8 x 16mm Hex Bolt
  

• Lock-it Security Barrel
  

Installation Guide

1. 
2. 
3. 
   Flat – Figure A
   
   Tilt – Figure B
   All hardware shown are 1/4-20” x 3/4” BH screw w/ washer
   
   Figure C
   
   Solid Concrete/Brick
   Use proper mounting guideline per state code.

Brick (Alternative)
All hardware, threaded rod, epoxy, and other mounting hardware are not supplied. Shown for reference only

Wood Application
Use a stud finder to determine the center of the wall studs in the vicinity of the mount and mark the wall.
Drywood wall must be backed with at least 3/4” plywall to support the weight of the mount and flat-panel.

4. CONCRETE/BRICK
   Requires a minimum of 4 mounting screws on upper slots and 2 on bottom slots. Shell expansion anchors are suitable for both concrete and brick.
   
   3/4” PLYWOOD-BACKED
   Requires at least 4 mounting screws into wood stud and 4 mounting screws on the upper slots. Shell expansion anchors are not used for this application.
   

5. MOUNTING DIMENSIONS
   

[313.2mm]
E| Mimimum clearance of recess area| 54.85″ [1393.2mm]| 34.36″ [872.8mm]
6. 7. 8. SECURITY FEATURE
Lock the security barrel to prevent the mount from being tampered or disengaged.

Landscape

Portrait

Documents / Resources

| SAMSUNG 7170-0977 Series Outdoor Flat Tilt Wall Mount [pdf] Installation Guide
7170-0977 Series Outdoor Flat Tilt Wall Mount, 7170-0977 Series, Outdoor Flat Tilt Wall Mount, Flat Tilt Wall Mount, Tilt Wall Mount, Wall Mount, Mount
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>