FIAMMA 02093A57A Carry Bike Instruction Manual

June 12, 2024
FIAMMA

FIAMMA 02093A57A Carry Bike Instruction Manual

FIAMMA 02093A57A Carry Bike Instruction Manual

FIAMMA 02093A57A Carry Bike Instruction Manual - Parts FIAMMA 02093A57A Carry Bike Instruction Manual -
Parts

Check that nothing has been damaged or deformed during transport.
In the event of doubts or questions concerning the installation, use or limitations of the product, contact the dealer. We recommend that the installation is carried out by qualified personnel and in compliance with current local regulations.

FIAMMA 02093A57A Carry Bike Instruction Manual - Fig
1,2,3 FIAMMA 02093A57A Carry Bike Instruction
Manual - Fig 4,5 FIAMMA 02093A57A Carry
Bike Instruction Manual - Fig 6

WARNING!
Do not fully tighten the fork to the tube, leave 2mm space.

FIAMMA 02093A57A Carry Bike Instruction Manual - Fig 7 FIAMMA 02093A57A Carry Bike Instruction Manual - Fig
8

In case of problems please contact your local dealer indicating the data on the nameplate. Consult our website for spare parts drawing.

FIAMMA 02093A57A Carry Bike Instruction Manual - How to
useRead the following instructions and warnings carefully; failure to observe these installation and usage instructions as well as the laws for driving in the relevant country may cause severe harm or damage for which the manufacturer declines all responsibility. Before installation, ensure compatibility with the vehicle on which the product must be installed.
Checking that the wall/rear door is sufficiently solid and suitable for guaranteeing the resistance of the anchoring points is always mandatory. If not, strength and compliance with the maximum load indicated in the instructions are not guaranteed and it will be necessary to reinforce these points.
After having positioned the Carry-Bike on the rear axle of the vehicle, the normal weight distribution on both axles would be modified. This variation must not exceed the maximum permissible axle load.
Never exceed the maximum permitted length and the total weight of the full- load vehicle.
Make sure that loading occurs following a correct weight distribution; it must be uniformly distributed (the heaviest bike must be placed near the wall of the vehicle) to ensure better stability.
Always give warnings about the presence of the Carry-Bike on your vehicle, using a clearly signal for leaning loads and, in case of limited rear visibility, use the additional rear-view mirrors.
Take into account the presence of the Carry-Bike, paying attention during driving and especially during reversing manoeuvres, particularly if you have parking assist system. Always comply with speed limits and the Highway Code. The speed should always be suitable to traffic conditions and towed load. In case of use of the bike carrier with tow make sure that the tow hook is always accessible and the corner mobility of the tow is guaranteed (volume measuring din 74058).
Check periodically the bicycle rack to make sure it is firmly attached, especially during the first kilometres of after long trips to avoid damages of the Carry-Bike/vehicle. Make sure the belts are not loose and that the holding brackets have not shifted. Replace worn components immediately.

FIAMMA 02093A57A Carry Bike Instruction Manual - RAIL QUICK
PRO

Warranty Fiamma In case of defects with regards to materials and manufacturing, the customer is entitled to the warranty in accordance with local laws and regulations of the country in which the product was purchased.

https://www.fiamma.it/en/

fiamma.com
Fiamma S.p.A. – Italy Via San Rocco, 56 21010 Cardano al Campo (VA)

All rights reserved. Fiamma S.p.A.
reserves the right to modify at any time, without notice, prices, materials, specifications and models or to cease production of any model.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals