SALUKI SCKCL09-N Mechanical Calibration Kit Owner’s Manual
- June 12, 2024
- SALUKI
Table of Contents
SCKCL09-N Mechanical Calibration Kit
Owner’s Manual
(DC – 9GHz / N-type)
Key Features
- Frequency Range: DC to 9GHz
- VSWR : <1.029
- Calibration standards to perform full two-port calibration
- Adapters and torque wrench included
-
500 times Cycles
Overview
Saluki’s SCKCL09-N mechanical calibration kit contains precision standard devices to calibrate network analyzers in the N-type interface. This kit also contains adapters to change the sex of the test port, and a torque wrench to ensure a repeatable reliable connection.
| Model | Frequency | Spec. | List | qty. |
|---|
SCKCL09-N
(Calibration Level)| DC – 9GHz| Open: ±1.2°
Short: ±1.0°
Load: VSWR<1.029
Adaptor: VSWR<1.052| Open: N (M)| 1
Open: N (F)| 1
Short: N (M)| 1
Short: N (F)| 1
Load: N (M)| 1
Load: N (F)| 1
N(f)-N(f) adaptor| 1
N(m)-N(m) adaptor| 1
N(m)-N(f) adaptor| 1
N-type Torque wrench| 1
Material Information
Basic Data
Interface| IEEE Std 287
Mating Cycles| >500 cycles
Coupling Torque| 0.9Nm
Open-End Wrench Size| 19mm
Electrical Data
Frequency| DC – 9GHz
Impedance| 50Ω
Average Power| ≤0.5W
Materials
Center Conductor| Au-plated Beryllim Copper
Body| Copper Plating/Stainless Steel, Passivated
Connector Nut| Stainless Steel, Passivated
Note: Information will conduct the necessary updates, the contents of this document are subject to change without notice
No.367, Fuxing N. Rd.,
105 Taipei, Taiwan
Tel: +886. 909 602 109
[email protected]
www.salukitec.com