epiphan AV.IO HD HDMI to USB Capture Instruction Manual
- June 12, 2024
- epiphan
Table of Contents
epiphan AV.IO HD HDMI to USB Capture
Product Information
The AV.io HD+ is a plug-and-play HDMI-to-USB capture card that allows you to effortlessly capture 1080p video from HDMI cameras and devices. It features an all-metal enclosure and durable connectors, ensuring long-term use. The capture card is compatible with Windows, Mac, and Linux operating systems and offers enhanced performance and a 3.5 mm analog audio input.
Key Features:
- Lightweight and compact design
- Powered over USB
- No need for video scaling or aspect ratio adjustments
- Automatic image adjustment based on software used
- Capture audio from HDMI source or 3.5 mm input
- USB 3.0 and USB 2.0 interface
- UVC and UAC device
- HDMI and USB 3.0 B-Type connectors
- Various input resolutions and frame rates supported
- YUV 4:2:2 output color space
- Capture latency
- HDMI audio input
- Audio output
- LED indicators for power, readiness, and operation status
- Compatible with Windows, Mac, and Linux operating systems
- HDCP compliance: Cannot capture protected video sources
Product Usage Instructions
- Connect your HDMI camera or device to the AV.io HD+ using an HDMI cable.
- If you want to capture audio directly from your HDMI source, no additional steps are needed. If you want to capture audio from an external source, connect it to the 3.5 mm audio input.
- Connect the AV.io HD+ to your computer using a USB 3.0 or USB 2.0 cable.
- Ensure that the AV.io HD+ is powered on and connected properly.
- Launch your preferred video capture software on your computer (compatible software may vary).
- Configure the video capture settings within the software, such as resolution and frame rate. Note that third-party software will set the frame size and frame rate.
- Start the video capture process in the software and begin recording or streaming your HDMI video feed.
- If needed, adjust the audio settings within the software to ensure proper audio capture and synchronization.
- After capturing your desired video content, stop the recording or streaming process within the software.
- Disconnect the AV.io HD+ from your computer and HDMI source when finished.
For more information and support, visit www.epiphan.com or contact Epiphan via email at info@epiphan.com or phone at +1 877-599-6581 (North America) or +44 (0)20 3744 8277 (United Kingdom).
OVERVIEW
The plug-and-play AV.io HD+ lets you easily capture 1080p video from HDMI cameras and devices. With its all-metal enclosure and durable connectors, AV.io HD+ will stand up to repeated, long-term use.
NEW! Now featuring enhanced performance and 3.5 mm analog audio input.
Epiphan AV.io HD+™ USB capture card
Make video capture effortless
With AV.io HD+, capturing video from HDMI devices on Windows, Mac, or Linux is as easy as using a plug-and-play webcam – no driver installation required.
Take your capture card with you
AV.io HD+ is light and compact. It’s powered over USB, which means one less adapter to carry around. And it’s based on tough-as-nails technology that’s even been used in space, so you can confidently take it wherever there’s video to capture
Size and scale effortlessly
There’s no need to think about video scaling or aspect ratios with this capture card. AV.io HD+ will automatically adjust your image based on the software you’re using, delivering superior video quality even when swapping between sources
Bring in your audio
Capture audio directly from your HDMI source, or through the 3.5 mm input to capture from a mixer or other external source. You can even bring in audio from both inputs simultaneously.
SPECIFICATION
Note : Third-party software will set frame size and frame rate.
www.epiphan.com
Email info@epiphan.com
Toll free + 1 877-599-6581
North America +1 650-644-4684
United Kingdom + 44 (0)20 3744 8277
™ and © 2022 Epiphan Systems Inc. All rights reserved. Epiphan, Epiphan Video, Epiphan Systems, the names and logos of its products are tradenames or trademarks of Epiphan Systems Inc. All other company, interface and product names and logos are trademarks or registered trademarks of their respective owners in certain countries. Product descriptions and specifications regarding the products in this document are subject to change without notice