Mircom EL-7006-RC Emergency Light Owner’s Manual
- June 12, 2024
- Mircom
Table of Contents
Mircom EL-7006-RC Emergency Light
Product Information
The Emergency Light (Remote Capable) model EL-7006-RC is a compact and portable lighting device that is designed to provide illumination in emergency situations. It features a built-in rechargeable battery and LED lamps for efficient and reliable lighting.
Features
- Input Power on AC (when charging): 5.3W
- Input Power on AC (when fully charged): 1.5W
- Lamp Type: 2x2W LED
- Input Voltage: 120/347 VAC
- Frequency: 60 Hz
- LED Type: SMD LED
- Battery Type: Sealed Lead Acid
- Working Time: 30 Minutes at 28W
- Charging Time: 24 Hours
Description **
**
The EL-7006-RC Emergency Light is a reliable and versatile lighting solution for emergency situations. It is equipped with two 2W LED lamps that provide bright and energy-efficient illumination. The built-in rechargeable battery is a sealed lead acid type, ensuring long-lasting performance.
- Injection-molded thermoplastic ABS housing
- UL-94-V-0 flame rating, fire-retardant
- Wall Mountable
- Switchable input voltage 120/347 VAC
- Optional 120V line cord/AC plug included
- 2x2W lamps for emergency mode, 113.5 lumens each
- Sealed lead acid battery 6V5Ah
- Test switch and charge indicator light
- Overcharge & Over-Discharge protection
- Backup time: 30 Minutes at 28W
- Remote Capability: Up to 24W of additional remotes for 30 minutes, 7W for 90 minutes
- Conversion time: <0.2 second
- IP Class: IP20
- Insulation: II, 80m2/860sq ft
- Operating Temperature: 0 ºC ~ 40 ºC / 32 ºF ~ 104 ºF
Product Usage Instructions
Charging the Emergency Light
- Connect the provided AC power adapter to the charging port of the emergency light.
- Plug the other end of the power adapter into a standard AC power outlet.
- The charging indicator light will turn on to indicate that the battery is being charged.
- Leave the emergency light connected to the power source for a minimum of 24 hours to fully charge the battery.
- Once fully charged, the charging indicator light will turn off.
Using the Emergency Light
- In the event of a power outage or emergency, locate the power switch on the emergency light.
- Flip the power switch to the “ON” position to activate the LED lamps.
- The LED lamps will provide bright illumination for up to 30 minutes.
- After use, flip the power switch to the “OFF” position to conserve battery power.
Note: It is recommended to periodically check the charge level of the battery and recharge as needed to ensure optimal performance in emergency situations.
Technical Drawing Remote Add-ons EL-7030A (1.5W) EL-7030B (3W)
Ordering Information
Model Description
EL-7006-RC| Emergency Light (Remote Capable)
Canada
25 Interchange Way Vaughan, ON L4K 5W3 Telephone:
905-660-4655 | Fax:
905-660-4113
U.S.A.
4575 Witmer Industrial Estates Niagara Falls, NY 14305
Toll Free: 888-660-4655
Fax Toll Free: 888-660-4113
www.mircom.com
THIS INFORMATION IS FOR MARKETING PURPOSES ONLY AND NOT INTENDED TO DESCRIBE
THE PRODUCTS TECHNICALLY.
For complete and accurate technical information relating to performance,
installation, testing and certification, refer to technical literature. This
document contains intellectual property of Mircom. The information is subject
to change by Mircom without notice. Mircom does not represent or warrant
correctness or completeness. All rights reserved. All other trademarks and
registered trademarks are properties of their respective owners.