CREALITY HALOT-MAGE Pro 3D Printer User Manual

CREALITY HALOT-MAGE Pro 3D Printer

Dear Consumers

• Thank you for choosing our products. For the best experience, please read the instructions before operating the Printer. Our teams are always ready to render you the best services.
• Please contact us via the phone number or e-mail address provided at the end when you encounter any problem with the Printer.
• For a better experience in using our product, you can also access how to use the printer in the following ways:
  • View the accompanied instructions and videos in the U disk.
  • Visit our official website www.creality.com to find relevant software/hardware information,contact details and operation and maintenance instructions.

Firmware/Software Downloads and Upgrades

The Printer already supports the following slicing software, and further functions are on the development roadmap.

• Cl Download the firmware and HALOT BOX slicing software at: https://www.creality.com
• Download the CH ITU BOX slicing software at: https://www.chitubox.com

Notes

1. Do not use the printer any way other than described to avoid personal injury or property damage.

2. Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, low-dust environment.

3. Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print quality.

4. Please use recommended resin in case damage to machine.

5. Do not use any other power cable except the one supplied. Always use a grounded three-prong power outlet.

6. Please do not open the plastic cover during usage, otherwise the printing will be interrupted.

7. Do not wear cotton gloves when operating the printer. Such cloths may become tangled in the printers moving parts leading to burns, possible bodily injury, or printer damage.

8. Please wait after the print is finished. please wear gloves to take out the print tools.

9. Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered printing plastics or any other material off the frame,
   guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface.

10. Children under 10 years should not use the printer without supervision.

11. Tips Do not plug or unplug the power cord when power on.

12. Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. (reality will not be responsible for any violators’ legal liability under any.

Product Appearance

1. Thumb screw
2. Forming platform
3. Feed system
4. Hexalobular socket screw
5. Touch screen
6. Leveling screw
7. Air filter
8. Resin vat
9. USB port
10. Power switch
11. Power port
12. RJ45 interface

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>