EPH CONTROLS CRT2 Room Thermostat Instruction Manual
- June 9, 2024
- EPH CONTROLS
Table of Contents
EPH CONTROLS CRT2 Room Thermostat
Important: Keep this document
This timeswitch is designed to provide ON/OFF control for 1 zone.
Installation
CAUTION!
Installation and connection should only be carried out by a qualified person
and in accordance with national wiring regulations.
- Before commencing any work on the electrical connections, you must first disconnect the timeswitch from the mains. None of the 230V connections must be live until the installation has been completed and the housing is closed. Only qualified electricians or authorised service staff are permitted to open the timeswitch. Disconnect from mains supply in the event of any damage to any buttons.
- There are parts that carry mains voltage behind the cover. The timeswitch must not be left unsupervised when open. (Prevent non specialists and especially children from gaining access to it.)
- If the timeswitch is used in a way not specified by the manufacturer, its safety may be impaired.
- Prior to setting the timeswitch, it is neccessary to complete all required settings described in this section. Never remove this product from the electrical baseplate. Do not use sharp tools to push any button.
This timeswitch can be mounted in the following ways:
- To a recessed conduit box
- To a surface mounted box
- Directly mounted on wall
EPH Controls Ireland
technical@ephcontrols.com
www.ephcontrols.com
EPH Controls UK
technical@ephcontrols.com
www.ephcontrols.co.uk
20221004_A17_Insins_PK
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>