VEVOR Ultrasonic Cleaner Manual: Professional 41100000 Instruction Guide

The VEVOR 41100000 Professional Ultrasonic Cleaner is a powerful and versatile cleaning tool designed for use in a variety of settings, including electronic factories, car workshops, industrial and mining areas, laboratories, hospitals, dental clinics, watch shops, optical shops, jewelry shops, mobile phone repair shops, and households. This ultrasonic cleaner comes with a detailed instruction manual that provides essential information and advice on product usage to ensure safe and efficient operation. Users are advised to read the manual carefully before operating the machine to avoid damage to the device or any danger to personal safety. The manual contains important cautions and warnings, including the need to ensure the power supply is within the rated range before connecting the power cable, the prohibition of refitting, and the importance of ensuring the earth wiring is well connected before starting. Additionally, the manual provides detailed specifications and application information, including the types of cleaning applications and materials suitable for use with the machine. The manual also includes maintenance and troubleshooting instructions to help users keep their ultrasonic cleaner in optimal condition.

VEVOR 41100000 Professional Ultrasonic Cleaner

APPLICATION: Electronic factory, Car work shops, Industrial and mining area,Laboratories, Hospitals, Dental clinics, Watch shop,Optical shops, Jewelry shops, Mobile phone repair shops, and household use. CAUTION Thanks for purchase ultrasonic cleaner,Please read the instruction manual carefully before operation to avoid damage to the machine or any danger to personal safety. And please keep it for reference.

• Ensure the power supply is in rated range before power cable is connected. Refitting is strictly prohibited! Attention that the control panel will be eroded by organic solution, strong acid and strong alkali.
• Ensure the earth wiring is well connected before starting.
• Ensure the power key or knob is on the ‘OFF’ place before starting.
• Do not operate if the tank is empty, or ultrasonic generator will be damaged. If heating is needed, the water level shouldn’t be less than 2/3.
• Please close the lid to reduce noise and pay attention to water and steam in case of burning skin while open the lid.
• Do not relocate the machine when fluid in the tank in case of overflow.
• Suggest using water-soluble liquid for bentch top ultrasonic cleaners. Strong acid or flammability cleaner is forbidden.
• Do not use the machine in severe environment:
  • The place where temperature changes fiercely;
  • The place where humidity is too high and is easy to produce dew;
  • The place where vibration or impact is strong;
  • The place where exists corrosive gas or dust.
  • The place where water, oil or chemicals splash.
  • The place where is filled with explosive and flammable gas.
• Shorten the daily working time. Suggestion is to stop for a few minutes for heat dissipation after working over 30 minutes. Heater is forbidden when using flammable liquid (such as alcohol, solvent cleaner etc.) to clean objects. Cleaning effect will be much better if using the machine together with proper solvent.

SPECIFICATION

How To Create Digital Clock Using H...

How To Create Digital Clock Using HTML CSS & JavaScript _ Display Time Using JavaScript

APPLICATION

Cleaning Application: PCB, jewelry, electronic components, car parts, hardware,metal tools,computer parts, Laboratory instruments, clock & watches, eyeglasses, contact lens, dentures, dental tools, DVD & VCD, golf, table-ware, printer inkjet, seal and comb, toothbrush, coins, etc.

polishing wax , dust particles, etc.
        Electrical & electronic machine|     Tube parts , cathode ray tube , printed circuit board , quartz parts , electronic components, telephone switching equipment , speaker components, power meter, LCD glass, core iron parts, computer floppy d isk , video parts, hoop parts, head, photo die mask , etc.|     Finger pr int , powder , cutting oi l, stamping oil, iron fi l ings , polish­ ing materials, walnut powder , polishing wax, resin, dust , etc.
    Precision machine|   Bea ring , sewing machine parts , typewr ite r, textile mach ine , optical mechanical device , gas valve , watches, cameras, metal filter el eme nt , etc.|   Machine cutting oil, iron filings, polishing powder, finger print, oil , grease, dirt, etc.
    Opt ica l device|   Glasses , lens, pr is m, optical lens, filter le ns , glass device, film, optical fiber, etc.|   Plastic , res in , para ff i n, finger pr inti ng , etc.
    Hardware & machinery parts|   Bear i ng , gear, ball, metal shaft parts , tools, adjustable va l ve and cylinder  parts,  burner  ,  compressors , hydraulic press, gun and ult racentrifuge , city water faucet, etc.|   Cutting oil , iron fili ngs , grease, polishing powder, finger printing, and so on.
  Medica l instrument|   Medical inst ru me nt , denture, etc.|   Iron fi li ngs , polishing powder , o i l, stamping oil , d i rt , etc.
      El ectro pla te|       Ga l v an ized parts, mold, stamping parts, etc.| Polishing scrap iro n, oil , black iron she ll, rust, oxidation shell, scrap iron, polishing powder , stamping oi l, di rt , etc.
    Car parts|     Piston ring , carburetor, flow meter housing, compressor shell, electrical components, etc.|     Iron fi li ngs , polishing powder, oil , stamping oil, dirt, etc.
    Chemical fiber|     Chemical or arti fic ia l fiber nozzle filter protector chemical fiber texture, etc.|     Chemical colloid, glue , and other solid material, dust, etc.

PRODUCT DRAWING & INDICATION

OPERATION PROCEDURE

• Before starting the equipment, check the machine to see if there is loosen parts.
• Keep the unit on a stable and flat working platform in dry and cool environment.
• According to the size and quantity of washing objects, add little bit detergent in the tank which can help improve the cleaning effect. (Empty tank working is forbidden!)
• Ensure correct power and switch connect before starting the equipment. 4
  • Operation Instructions: (Mechanical models)
  • Start (ULTRASONIC), clockwise rotate to choose the time you required between 0-30 min. When the indicator light is on and make “ZIZI” sound, it shows ultrasonic operation work OK.
  • If need heating, start(HEATING) to adjust required temperature, normally 40-60’C is the best.(Heating is optional upon needs)
  • To stop cleaning.
  • press OFF once, the ultrasonic stop run, the indicator light will also be off.
  • rotate the heating control knob to “OFF” , the indicator light will also be off.
  • then switch off the unit and disconnect the power.
  • empty out the liquid and clean the tank and the unit with clean cloth for next use.
  • Operation Instructions: (Digital models)
  • Timer setting: When power is connected, the default setting is “05:00” .Press TEME+ once will increase time by 1 min; Press TEME+ once will decrease time by lmin.( Free choice and digital countdown control).
  • Temperature setting: (heating is optional upon needs):When power is connected, the default setting is “50°C” and Actual is room temp., press TEMP+ once, will increase temperature by 1 ‘C; Press TEMP- once, will decrease temperature by 1 ‘C. If the setting temperature is lower than the actual tank temperature, the operation will stop automatically. When the temperature rises to the setting temperature, the indicating light goes off. When ultrasonic work, two temperature screen shows set temperature and actual temperature has been reached.
  • After set the time and temperature, press ON/OFF once, the equipment will work automatically. Press ON/OFF again, the work process will stop. Then switch off the unit and disconnect the power supply, empty out the liquid and clean the tank and the unit with clean cloth for next use.
  • Adjusting power:
  • The function is only available for power adjustable models! Rotate SLOWLY the power knob clock-wise to increase the power from 40% to 100%,and counter-clockwise SLOWLY is to decrease sonic power.

MAINTENANCE

• Maintenance
  • The unit must be opened by authorised specialised person only for maintenance and care of it.
  • Clean the contaminant in the tank frequently.
• Trouble clearing**
  No.| Problems| Possible causes| Solutions| Remarks
  ---|---|---|---|---
   |  |   A, Po w er s upp l y not co nn e ct B, F u s e broken|   A , Check and plug po wer swit ch. B, Check the fitted powe r suppl y and chang e the same s p e c i ficat io n fu s e .|
  N o u ltr a s on ic| C, Cab le short c i rcuit D, Tran s duc e r s hort c ir cu it E, PCB Board broke n F , Other re a s on s| C, Connect fitted cabl e or r e p lac e a ne w D,  Inqu ir y our after s er v ice   engineer. E, Check the broken part and chan ge it. F, Inq ui r y our after s er v ic e en g in e er.
    2|     Time control failure|   A , Ti m e r knob out of control   B, Timer fa il ur e   C , Oth e r r e a so n s|   A, Lo os en or tighten the s cre w .   B, R e place tim e r or digi tal panel.   C , Inquir y our after se rvice engineer.|
   |  |   A, Heater po w er sw itc h bad| A, Check heating plug and conn ect we l l , Check|           Sug ge s t io n 6 0 S0- 0 C
   |  | link age| o utl e t lin e with multim e t e r: if OK and r es i s tanc e
   |  |  | valu e is few hundred OH M s.
  3| No heat ing| B, Fu se burn out| B, Chan g e th e s am e s pec i ficat io n fu s e .
  C, He at i ng pad burn out| C, Replace th e bad heating pad if open circuit.
   |  | D, Dig ita l di splay board out of| D, Check the broken par t and change it.
   |  | control|
   |  | E , Other rea s on s| E , Inqu ir y our after s er v ice e n g i nee r.
      4|       T e mp e ratur e c o ntrol failur e|   A, Th e rm os tat lo ose n B, Thermo stat tube broken C, Digital dis play out of control D, Oth e r r e a s on s|   A, Fa s t e n th e th e rm os tat h e ad e r . B, Re place th e rmo stat. C, Check the broken part and change it. D, Inquiry our a ft e r se r v ic e e n g in ee r .|
        5|         Not well cleaning|   A , N ot s trong ultra s on ic cleaning B, Too high too low liquid surface C, Too high too low temperature D, Not suitable clean in g liquid   E, Other reasons|   A , Connect ultra s onic button and adju s t. B, Adjust liquid in to the best surface. C, A djust temp e rature into the most fitted. D,  Stop and  switch off  power supply, replace s uit able liquid after th e pre v iou s liquid cool down. E , Inquir y our after s er v ice engineer.|       Suggestion so-6o · c
    6|   Electricle pakage|   A , C u s tomer s id e not g rounded B, Machin e not ground e d|   A , To e n s ure ground e d . B, C h e ck if machin e e arth wir e lo ose n .**|
  7| Other problems|  |  |

SPECIFICATIONS

Application| Electronic factory, Car work shops, Industrial and mining area,Laboratories, Hospitals, Dental clinics, Watch shop,Optical shops, Jewelry shops, Mobile phone repair shops, and household use.
---|---
Cleaning Application| PCB, jewelry, electronic components, car parts, hardware,metal tools,computer parts, Laboratory instruments, clock & watches, eyeglasses, contact lens, dentures, dental tools, DVD & VCD, golf, table-ware, printer inkjet, seal and comb, toothbrush, coins, etc.
Industry| The cleaning products and materials
 | Clear dirt, Semi-conductor, Integrated circuit, power tube, silicon wafer, diode, lead frame, capillary, tray, etc., Hardness, etching oil, stamping oil, polishing wax, dust particles, etc., Electrical & electronic machine, Tube parts, cathode ray tube, printed circuit board, quartz parts, electronic components, telephone switching equipment, speaker components, power meter, LCD glass, core iron parts, computer floppy disk, video parts, hoop parts, head, photo die mask, etc., Finger print, powder, cutting oil, stamping oil, iron filings, polishing materials, walnut powder, polishing wax, resin, dust, etc., Precision machine, Bearing, sewing machine parts, typewriter, textile machine, optical mechanical device, gas valve, watches, cameras, metal filter element, etc., Machine cutting oil, iron filings, polishing powder, finger print, oil, grease, dirt, etc., Optical device, Glasses, lens, prism, optical lens, filter lens, glass device, film, optical fiber, etc., Plastic, resin, paraffin, finger printing, etc., Hardware & machinery parts, Bearing, gear, ball, metal shaft parts, tools, adjustable valve and cylinder parts, burner, compressors, hydraulic press, gun and ultracentrifuge, city water faucet, etc., Cutting oil, iron filings, grease, polishing powder, finger printing, and so on., Medical instrument, Medical instrument, denture, etc., Iron filings, polishing powder, oil, stamping oil, dirt, etc., Electroplate, Galvanized parts, mold, stamping parts, etc., Polishing scrap iron, oil, black iron shell, rust, oxidation shell, scrap iron, polishing powder, stamping oil, dirt, etc., Car parts, Piston ring, carburetor, flow meter housing, compressor shell, electrical components, etc., Iron filings, polishing powder, oil, stamping oil, dirt, etc., Chemical fiber, Chemical or artificial fiber nozzle filter protector chemical fiber texture, etc., Chemical colloid, glue, and other solid material, dust, etc.
Temperature| Heating is optional upon needs. The water level shouldn’t be less than 2/3. Normally 40-60’C is the best.
Timer| 0-30 min for mechanical models. Digital models have free choice and digital countdown control.
Power| The function is only available for power adjustable models! Rotate SLOWLY the power knob clock-wise to increase the power from 40% to 100%,and counter-clockwise SLOWLY is to decrease sonic power.

FAQS

What types of applications is the VEVOR 41100000 Professional Ultrasonic Cleaner suitable for?

The VEVOR 41100000 Professional Ultrasonic Cleaner is suitable for use in electronic factories, car workshops, industrial and mining areas, laboratories, hospitals, dental clinics, watch shops, optical shops, jewelry shops, mobile phone repair shops, and households.

What are some important cautions and warnings to keep in mind when using the VEVOR 41100000 Professional Ultrasonic Cleaner?

Some important cautions and warnings to keep in mind when using the VEVOR 41100000 Professional Ultrasonic Cleaner include ensuring the power supply is within the rated range before connecting the power cable, prohibiting refitting, ensuring the earth wiring is well connected before starting, not operating if the tank is empty, and not relocating the machine when fluid is in the tank to avoid overflow.

What types of cleaning applications and materials are suitable for use with the VEVOR 41100000 Professional Ultrasonic Cleaner?

The VEVOR 41100000 Professional Ultrasonic Cleaner is suitable for cleaning applications such as PCBs, jewelry, electronic components, car parts, hardware, metal tools, computer parts, laboratory instruments, clock & watches, eyeglasses, contact lens, dentures, dental tools, DVD & VCD, golf, table-ware, printer inkjet, seal and comb, toothbrush, coins, etc.

What should I do before starting the VEVOR 41100000 Professional Ultrasonic Cleaner?

Before starting the VEVOR 41100000 Professional Ultrasonic Cleaner, check the machine to see if there are any loose parts. Keep the unit on a stable and flat working platform in a dry and cool environment. According to the size and quantity of washing objects, add a little bit of detergent in the tank which can help improve the cleaning effect. Ensure correct power and switch connect before starting the equipment.

How do I adjust the power of the VEVOR 41100000 Professional Ultrasonic Cleaner?

To adjust the power of the VEVOR 41100000 Professional Ultrasonic Cleaner, rotate the power knob clockwise to increase the power from 40% to 100%, and counter-clockwise is to decrease sonic power. Note that this function is only available for power adjustable models.

How do I maintain the VEVOR 41100000 Professional Ultrasonic Cleaner?

To maintain the VEVOR 41100000 Professional Ultrasonic Cleaner, clean the contaminant in the tank frequently. The unit must be opened by authorized specialized person only for maintenance and care of it.

What should I do if there are problems with my VEVOR 41100000 Professional Ultrasonic Cleaner?

If there are problems with your VEVOR 41100000 Professional Ultrasonic Cleaner, refer to the troubleshooting chart in the manual. Possible causes and solutions include checking and plugging the power switch, checking the fitted power supply and changing the same specification fuse, connecting fitted cable or replacing a new one, inquiring with the after-service engineer, and more.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>