MOES Smart WiFi Dimmer Switch User Manual

MOES Smart WiFi Dimmer Switch

Product Information

• Product Name: Smart Dimmer Switch
• Features:
  • Wireless Access
  • Remote Control
  • Voice Control
  • Dimming Light
  • Device Share
  • Mechanical Push On/Off Button
• Specification:
  • Input Power: Inductive load (LED/CFL): 220V AC 50Hz, 220W Max
  • Resistive load (Incandescent): 300W Max
  • Control Channel: 1 CH
  • Standby Power: 0.5W
  • Working Temperature: -10°C to 45°C
  • Working Humidity: 86%

Product Usage Instructions

1. Ensure that the input power is within the specified range of 220V AC 50Hz.
2. Connect the Smart Dimmer Switch to your desired light fixture.
3. Download and install the corresponding mobile application for wireless access.
4. Follow the instructions in the mobile application to connect the Smart Dimmer Switch to your home network.
5. Once connected, you can control the dimming of the light through the mobile application or the mechanical push on/off button on the Smart Dimmer Switch.
6. To control the Smart Dimmer Switch remotely, use the remote control feature in the mobile application.
7. If you have a voice assistant device compatible with the Smart Dimmer Switch, you can use voice commands to control the light.
8. The Smart Dimmer Switch allows device sharing, so you can grant access to other users for controlling the light.
9. Ensure that the load connected to the Smart Dimmer Switch is within the specified limits. For LED/CFL lights, the maximum load is 220W, and for Incandescent lights, the maximum load is 300W.
10. The Smart Dimmer Switch has a standby power consumption of 0.5W, which should be taken into consideration.
11. Operate the Smart Dimmer Switch within the specified working temperature range of -10°C to 45°C and the working humidity of 86%.

Features

Product Introduction

• Excellent design and high-quality materials to ensure longterm stable and reliable service to users
• Optimized dimming algorithms maximize the compatibility of lights and does not flicker at any brightness
• Stepless touch/rotation dimming makes the brightness adjustment easy and smooth
• Silent mechanical push button design provide the user’s best feedback

Specification

Installation

(Smart Touch Dimmer Switch)

(Smart Rotary Dimmer Switch)

Installation

1. Disconnect power by circuit breaker;
2. Check the Line with voltage tester pen, make sure the power is off to prevent electric shock;
3. Follow the wiring instructions, connect the dimmer wires to each other leads and check for short circuits;
4. Screw the dimmer into the back box;
5. Mount switch cover panel;
6. Connect circuit breaker restore power.
   Note: Please be careful when installing, do not damage the circuit board and components. The color of the wires may be different from the instructions in the manual, please have a qualified person to complete the installation.

Connection & Operation

1. Once connect power correctly, turn on circuit breaker, the green LED on the dimmer will turn on, dimmer switch is ready to serve.

2. Push the knob button to turn on/off the light. When dimmer is on, indicator turns white. When dimmer is off, indicator turns green.

3. Rotate the knob to adjust the brightness, counterclockwise to turn down the brightness, and clockwise to turn up the brightness.

4. Once connect power correctly, turn on circuit breaker, the green LED on the dimmer will turn on, dimmer switch is ready to serve.

5. Push the knob button to turn on/off the light. When dimmer is on, indicator turns white. When dimmer is off, indicator turns green.

6. Rotate the knob to adjust the brightness，counterclockwise to turn down the brightness, and clockwise to turn up the brightness.

AP setup Mode
The AP setting mode is mainly applicable to situations where the network environment is poor, such as multiple network interference or low signal quality.

1. In the smart setting mode, the wifi indicator flashes quickly, please press and hold the switch for 5 seconds to enter the AP setup mode, LED will flashs slowly.
2. Open Smartlife APP and search WiFi SSID “Smartlife-XXXX”， then connect to the device, wait unit the progress to complete, it takes up to 2min.
3. After completing the above process, the device will automatically connect to the router.
   Reset / Re-pair the product
   Press and hold ON/OFF button for 5second then release, the indicator will flash, dimmer get into setup mode, please follow setup instruction to complete setup to start smart function.

APP Operation

1. Scan QR code and download the app iOS or Android version.

2. Register and login
   The user needs to register the user first, and can use the mobile phone number to register. Once you are done, you can use this username to log in to the APP and proceed to the next step. *Support some third-party accounts are directly logged in.
   Note: If what you choose is the ZigBee or Bluetooth version, then a ZigBee or Bluetooth hub is required for connection first before successful pairing.

3. Add Devices
   After the user logs in, click the “+” icon in the upper right corner of the main page to enter the add device interface, select the “Switch” menu and click the switch device icon.
   Note: Please choose the right type referring to ZigBee/ Bluetooth/WiFi version in the APP device list.

4. Add Devices
   To ensure that the new dimmer power LED is flashing, select the Wi-Fi and enter the password then click OK.

5. Add Devices
   Wait system to search the device, connect and configure the device will takes up to 3min. Once the device configure successfully, please also input preferred name and select location.

Remark:

1. Smart phone and device must connect to same Wi-Fi during setup mode;
2. The device must be added to the account before it can be controlled remotely;
3. After the device is successfully accessed, other users can obtain control of the product through the sharing function.

Troubleshooting

1. Can not connect to Wi-Fi router
   • Also make sure you have good Wi-Fi signal strength at the location of the dimmer
   • Metal box and metal surface – wall board may block Wi-Fi signal
   • Make sure input correct Wi-Fi password
   • The Dimmer only support 802.11 b/g/n 2.4GHz Wi-Fi signal, 5GHz NOT support

Thank you for your support and purchase at we Moes,we are always here for your complete satisfaction,just feel free to share your great shopping experience with us.

If you have any other need,please do not hesitate to contact us first,we will try to meet your demand.

WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815
Email:[email protected]
AMZLAB GmbH
Laubenhof 23, 45326 Essen
Made In China

References

• MOES Smart: Create Your Smart Life With Smart Home Devices

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>