PAX T3320 Data Service Terminal Installation Guide
- June 12, 2024
- Pax
Table of Contents
T3320 Data Service Terminal
PAX Technology
Limited
Contents Checklist
Please check the components after unpacking. If any are missing, please contact the dealer.
| Name | Qty |
|---|---|
| T3320 Data Service Terminal | 1 |
| USB Cable | 1 |
Congratulations on receiving your PAX Technology payment terminal. We do hope you enjoy it! The box you have just opened should contain the following items:
- 1 x T3320 Data Service Terminal
- 1 x USB Cable
Description
Installation
- Type-C port: Connect Power or Hub.
- Type-C port: Connect USB device.
Instructions
- Power ON/OFF
- Power on: Press and hold the Power button (on the top side) for three seconds until the circular LED light up.
- Power off: Press and hold the Power button (on the top side) for three seconds until the shutdown menu appears, tap “Shutdown”, The terminal will be turned off after a few seconds.
Specifications
- Operation System:Runthos
- CPU: 32bit Secutity Processor
- Memory:1MB SRAM, 8MB Flash
- Beep: 75dB
- Camera: 0.3M pixel
- Wireless Communication: Support Bluetooth® 4.0
- Peripheral Ports: 1 x Type-C ports
- Type-C power port:DC 5V+/- 5% 1A
Terminal Installation and Usage Tips
- Avoid placing this product in direct sunlight for extended periods, nor in environments with excessively high temperature, moisture or dust.
- Only qualified personnel should repair this product.
PAX Technology Limited reserves the right to change product technology specifications at any time.
Specification
- Avoid placing this product in direct sunlight for extended periods, nor in environments with excessively high temperature, moisture or dust.
- Only qualified personnel should repair this product.
- Do not plug/unplug any units of the product when it is power on, otherwise it may damage the internal circuit.
Important Safety Warning
-
Do not place the terminal or battery in direct sunlight, nor in environments with excessively high temperatures, smoke, dust, or dampness.
-
Do not attempt to disassemble the battery, nor insert or use foreign objects to penetrate the casing. Never place the battery in a fire or excessively hot surfaces. Take care not to drop the battery. Excessive external shocks or pressure could cause battery liquid leakage or result in the battery catching fire or even exploding. Keep the battery well away from children and animals.
-
Immediately replace any battery which appears to be deformed, expanded or in an overheated state.
-
We recommend you only use power adaptors supplied by PAX Technology. If you must use 3 party supplier accessories, please ensure specifications meet exactly those recommended for our products, which must comply with international and local regulations & standards. Non-compatible power supplies, chargers or batteries could cause fires or even explosions, and will invalidate any product warranty. rd
-
Charge the battery when the indicator level is low, but make sure to never charge a battery continuously for more than 24 hours. If a battery is not used for a long time, please charge it at least once every 6 months to avoid overcharge or discharge damage. For long-term optimal product performance, it is recommended that a battery be replaced after 2 years of continual usage.
-
When disposing of the device, battery, or accessories, please do so responsibly and according to local regulations. These are not household waste items. Improper disposal of the battery could cause a fire or explosion, and any liquid leakage could be damaging to the environment and toxic to humans & animals.
-
To avoid risk of fire, please just connect the product to an power supply of which output capability is less than 15W.
Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types); -
Disposal of a battery into _re or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion;
-
Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of _ammable liquid or gas;
-
A battery subjected to extremely low air pressure that may result in an explosion or the leakage of _ammable liquid or gas.
FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause ndesired operation.
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiated
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
FCC RF Exposure Information (SAR)
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the United States.
During SAR testing, this device is set to transmit at its highest certified
power level in all tested frequency bands, and placed in positions that
simulate RF exposure in usage near the body. Although the SAR is determined at
the highest certified power level, the actual SAR level of the while
operating can be well below the maximum value. This is because the device is
designed to operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a wireless
base station antenna, the lower the power output.
The exposure standard for wireless employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. The
FCC has granted an Equipment Authorization for this model device with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this model device is on file with the FCC and
can be found under the Display Grant section of
www.fcc.gov/oet/ea/fccid after searching on
FCC ID: V5PT3320
To ensure that RF exposure levels below the levels tested, use accessories with this equipment to maintain a minimum separation distance of 0mm between the body of the user and the device. For this device, the highest reported SAR value for usage near the body is 0.11 W/kg While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement.
ISED Notice
This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada IC: 11689A- T3320
ISED Radiation Exposure Statement
This EUT is in compliance with SAR for general population/uncontrolled
exposure limits in ISED RSS-102 and had been tested in accordance with the
measurement methods and procedures specified in IEC/IEEE 62209-1528. This
device and its antenna(s) must not be co-located or operating in conjunction
with any other antenna or transmitter.
This device has been tested for compliance with IC SAR values at a typical operating near the body. To ensure that RF exposure levels below the levels tested, use accessories with this equipment to maintain a minimum separation distance of 0mm between the body of the user and the device. These accessories should not contain metallic components. It is possible that the accessories used close to the body that do not meet these requirements are not consistent with the SAR limits and it is advisable to avoid using them.
Environmental Parameters
- Working Environment：Temperature（for battery discharge mode）: -10℃~50℃ (14℉～122℉) ；Temperature（for charge mode）: 0℃~45℃
- Storage Environment：Temperature:-20℃～70℃(-4℉～158℉) (non-charging)
- Humidity：5%～95% (non-condensing)
Icons
| Dispose in a professional recycling manner
---|---
| Class II equipment
| For indoor use only
| Energy efficiency marking
| AC voltage
| DC voltage
PAX Technology Limited
Manufacturer: PAX Computer Technology (Shenzhen) Co. Ltd.
Address: 4/F, No.3 Building, Software Park, Second Central Science-Tech
Road, High-Tech Industrial Park, Shenzhen, Guangdong, China.
Tel: +86 755 86169630
Website: http://www.pax.com.cn