TOURATECH 01-037-5840-0 Crash Bar Instruction Manual
- June 12, 2024
- Touratech
Table of Contents
TOURATECH 01-037-5840-0 Crash Bar
Product Information
The product being referred to is a mounting kit for motorbikes manufactured by Touratech. This kit provides new ideas and solutions for motorbike enthusiasts, allowing them to enhance and customize their riding experience.
Product Usage Instructions
To ensure proper installation and usage of the Touratech mounting kit, please follow the instructions below:
- Begin by gathering all the components included in the kit.
- Inspect each component to ensure they are in good condition and free from any defects.
- Identify the appropriate mounting points on your motorbike where the kit will be installed.
- Using the provided tools, carefully attach the components to the designated mounting points.
- Ensure that all components are securely fastened and tightened according to the specified torque values.
- Double-check the installation to verify that everything is properly aligned and functioning correctly.
- Refer to the motorbike manufacturer’s guidelines or consult a professional if you have any doubts or concerns during the installation process.
- Once the mounting kit is securely installed, you can start enjoying the benefits it provides, such as additional storage options or improved functionality.
- Regularly inspect the mounting kit for any signs of wear ordamage. Replace any worn-out or damaged components immediately.
By following these usage instructions, you can maximize the functionality and
safety of your motorbike with the Touratech mounting kit. Enjoy your rides
with the added convenience and
customization options this product offers!
INSTRUCTION
We recommend having the accessory parts fitted by a specialist workshop.
Caution
Note
Liquid
Torque
Template
2 Persons
Original motorcycle part
These instructions are written based on our current state of knowledge. Information is provided without any guarantee as to its accuracy. Subject to technical modifications.
- The order of assembly steps must be followed.
- Touratech accepts no liability for incorrectly fitted parts and resulting material damage or personal injury!
- Please observe applicable road vehicle (construction and use) regulations as well as EC/ECE Directives and applicable laws in your country. If parts are fitted which require inspection and/or approval after fitting, take your vehicle to a testing station immediately and have the vehicle papers updated.
- Check and if necessary tighten all bolted connections after 50 km.
- Standard tightening torques in Nm for bolted connections with strength class 8.8.
- For special tightening torques refer to your specialist workshop!
- Please take into account that fitting panniers, crash bars, foot peg lowering kits (rider and pillion),Kickstand enlargement plate, front spoilers and engine guards may restrict the bike’s lean angle!
- If modifications are made to the fairing, stem, handlebar, fairing parts, etc., ensure that electrical wiring, brake lines, accelerator and clutch cables are refitted correctly. Check clearance, both sides with full steering lock .
- Always disconnect the battery when working on the electrics!
- We recommend cutting protective film to size and applying it to impact areas that are likely to be chipped by stones.
- Work on the brake system and suspension should always be carried out by a specialist workshop.
- The maximum load on luggage racks is 5 kg! Luggage racks Zega Pro TC is 10 kg!
- If other original accessories or aftermarket accessories are used, ensure clearance1 fitment and do not come into contact with other parts!
- Apply conventional lubricant to stainless steel bolts prior to assembly.
- PDF fitting instructions also can be downloaded from the Touratech webshop.
Mounting instructions
© November 2021 by: Touratech GmbH, Germany
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>