Moes MHUB-W-Q-MS Wireless Smart Gateway Instruction Manual
- June 12, 2024
- MOES
Table of Contents
HOME, SMART MOES HOME
MHUB-W-Q-MS Wireless Smart Gateway
Instruction Manual
Instruction Manual
Wireless Smart Gateway
Wi-Fi 2.4GHz & ZigBee 3.0 & BLE & Mesh
Product Specifications
Product name | Wireless Smart Gateway |
---|---|
Electrical Parameters | 5V 1A |
Operating temperature | -10℃-45℃ |
Operating humidity | 5%-90%RH(no condensation) |
Wireless Protocol | Wi-Fi 2.4GHz & ZigBee & BLE & Mesh |
Product Size | 606015 mm |
Product Weight | 60g |
Packing list
- Wireless Smart Gateway
- Instruction manual x 1
- Power cable x 1
Transportation
- The products shall be free from severe vibration, impact, exposure to rain, dumping and other problems during transportation, and shall comply with the provisions of the marks on the packing boxes.
- This product has no waterproof and dustproof function.
Storage
Products should be put in the warehouse where the temperature is between the range -10℃ ~ +45℃,and the relative humidity between the range 5%RH~90%RH(non condensation), indoor environment with no acid, alkali, salt and corrosive, explosive gas, flammable matter, protected from dust, rain and snow.
Safety Information
Do not disassemble, reassemble, modify, or attempt to repair the product by yourself. Such products may cause electric shock, which may cause serious injury or death.
Product Description
The smart gateway is the control center of the ZigBee and Bluetooth device.Users can design and implement smart application scenarios by adding ZigBee and Bluetooth devices ①WiFi Indicator(Red): Configuration Status:
Steady On | Successful connection |
---|---|
Blinks | Ready for connection |
Bluetooth/AP mode | Explained as 1500ms ON and 1500ms OFF |
Steady Off | Successful configuration but the network is disconnected |
②Status Indicator(Blue):
Steady On | Activated |
---|---|
Blinks | access learning mode as 500ms ON and 500ms OFF |
Steady Off | Unactivated |
Preparation For Use
- Mobile phone is connected to 2.4GHz Wi-Fi
- The products shall be free from severe vibration, impact, exposure to rain, dumping and other problems during transportation, and shall comply with the provisions of the marks on the packing boxes.
- This product has no waterproof and dustproof function.
- Download and open the App
In the App Store, search for the relevant App or scan the QR code on the package/manual to download.
If you are downloading the App for the first time, please tap “Register”to register your account. If you already have an account, please click the “Login” button.http://smartapp.tuya.com/smartlife
Add Devices
- Connect power to gateway. Confirm that the LED indicator (red) blinks. (lf the indicator is in a different state, press the reset button until red indicator blinks);
- Make sure Bluetooth switch of the mobile is on, and mobile is connected to the 2.4 Ghz WiFi of home router, at this point, the mobile phone and gateway in the same local area network;
- Open the APP, will find gateway automatically, then click“Add”. If don’t find gateway, then click the button “+” in the upper right corner of the screen, select “Gateway Control” in the left menu bar on screen, and choose “Multi-mode Gateway”, press function button until LED indicator blinks, operate according to App directions;
- Once the device has been added successfully, you will be able to find the device on the “My Home” page.
Electronic Information Products Toxic And hazardous substance Declaration
Part name | Toxic or harmful substances or elements |
---|---|
Lead Pb | Mercury Hg |
biphenyl PBB
PCB board| 0| 0| 0| 0| 0
Housing| 0| 0| 0| 0| 0
Cable| 0| 0| 0| 0| 0
O:
Indicates that the content of this toxic and hazardous substance in all
homogeneous materials of this part is below the maximum limit specified in
SJ/T1163-2006.
Requirements for Concentration Limits for Certain Hazardous Substances in
Electronic Information Products;
X:
Indicates that the toxic or hazardous substance contained in at least one of
the homogeneous materials of the part exceeds the maximum limit specified in
the SJ/T1163-2006 standard
The figures in this label indicate that the product has an environmental
protection use period of 10 years under conditions of normal use, and some
parts may also have an environmentally friendly use period mark. The
environmental protection use period is based on the number indicated by the
mark.
OPERATION
Q1. Can gateway/router control Zigbee devices on upper and lower floors or through the wall?
A. It is possible to control the devices through the wall, but the specific distance depends on the thickness and the material of the wall. It is hard to control the devices on upper and lower floors and you can have a ZigBee repeater to effectively expand the range of ZigBee communication network.
Q2. What should I do if the signal coverage of gateway/router is poor?
A. This is related to the location of the gateway/router and its distance from the sub-devices; There should be more than 2 gateways/routers needed for large flat floor, villa and other environments or with the ZigBee repeater required.
Q3. Can sub-devices on different gateways be linked?
A. Hello, yes, not only the cloud link, but also the local linkage of multiple gateways in the same LAN supported,and the sub-device linkage can still be performed efficiently when the network is disconnected or the cloud problem occurs, (the premise is that there is at least one gateway featured with strong performance, such as a wired ZigBee gateway).
Q4. What if the sub-devices fails to be added to the gateway?
A. Hello, please make sure that you have reset the sub-device for configuration state. It may also be due to insufficient wireless signal strength. Ensure that there is no metal wall barrier or interference from high-power electrical appliances between the gateway device and its sub-devices (it is recommended that the distance between the gateway device and its sub-devices shall less than 5 meters with no wall).
SERVICE
Thank you for your trust and support to our products, we will provide you with
a two-year worry-free after-sales service (freight is not included), please do
not alter this warranty service card, to safeguard your legitimate rights and
interests. If you need service or have any questions, please consult the
distributor or contact us.
Product quality problems occur within 24 months from the date of receipt,
please prepare the product and the packaging, applying for after-sales
maintenance in the site or store where you purchase; If the product is damaged
due to personal reasons, a certain amount of maintenance fee shall be charged
for repair.
We have the right to refuse to provide warranty service if:
- Products with damaged appearance, missing LOGO or beyond the service term
- Products that are disassembled, injured, privately repaired, modified or have missing parts
- The circuit is burned or the data cable or power interface is damaged
- Products damaged by foreign matter intrusion (including but not limited to various forms of fluid, sand, dust, soot, etc.)
RECYCLING INFORMATION
All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19 / EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To find out where these collection points are and how they work, contact the installer or your local authority.
WARRANTY CARD
Product Information
Product Name
Product Type____
Purchase Date
Warranty Period__
Dealer Information
Customer’s Name____
Customer Phone__
Customer Address
Maintenance Records
Failure date | Cause Of Issue | Fault Content | Principal |
---|---|---|---|
Thank you for your support and purchase at we Moes, we are always here for your complete satisfaction, just feel free to share your great shopping experience with us. ****If you have any other need, please do not hesitate to contact us first, we will try to meet your demand.
Follow US
MOES.Official @moessmart @moes_smart
@moes_smart @moes_smart www.moes.net
EVATOST CONSULTING LTD
Address: Suite 11, First Floor, Moy Road Business
Centre, Taffs Well, Cardiff, Wales, CF15 7QR
Tel: +44-292-1680945
Email: contact@evatmaster.com
AMZLAB GmbH
Laubenhof 23, 45326 Essen
Made In China
Manufacturer:
WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology
Innovation Center, NO.238, Wei 11 Road, Yueqing
Economic Development Zone, Yueqing, Zhejiang,
China
Tel: +86-577-57186815
After-sale Service: service@moeshouse.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>