PROOX PRAFRX513CH Single-Handle 6-Spray Tub and Shower Faucet Instruction Manual
- June 12, 2024
- PROOX
Table of Contents
PROOX PRAFRX513CH Single-Handle 6-Spray Tub and Shower Faucet
Product Information
| No. | Description |
|---|---|
| A | Shower arm and flange kit |
| B | Shower head |
| C | Pressure balanced diverter valve |
| C-1 | Valve Face plate with seal joint |
| C-2 | Diverter knob kit |
| C-3 | Trim cap (included) |
| C-4 | Allen screw (included) |
| C-5 | Bathtub spout |
Product Care Instructions
- We recommend using a professional plumber for all installation and repair.
- Please inform yourself about the Canadian plumbing code’s regulations and your local municipality plumbing codes before installation.
- The Canadian plumbing code requires the installation of surge arresting devices to eliminate water hammering.
- Allow an adequate opening in order to easily access connections or other plumbing devices for maintenance or repair.
Recommended Tools:
- Plumber’s putty
- Thread seal tape (included)
Connection Advice:
Firmly hand tighten the hose to the valve and add a quarter turn using the
proper wrench. Tighten more if needed.
Product Usage Instructions
Before You Begin:
Make sure you have the necessary tools and materials ready before starting the
installation process.
Installation Steps:
Step 1: Copper Connection
Follow the drilling guide to create openings for the copper connections.
Step 2: Head Shower Installation
- Connect the hot water pipe to the hot water inlet on the pressure balanced diverter valve.
- Connect the cold water pipe to the cold water inlet on the pressure balanced diverter valve.
- Connect the shower head to the top outlet of the pressure balanced diverter valve.
Step 3: Bathtub Spout Installation
Connect the bathtub spout to the bottom outlet of the pressure balanced
diverter valve.
Note: When using a hand shower, it needs to be connected to the top outlet of the pressure balanced diverter valve.
PRODUCT DRAWING
| No. | Description |
|---|---|
| A | Shower arm and flange |
| B | kitShower head |
| C | Pressure balanced diverter valve |
| C-1 | Valve |
| C-2 | Face plate with sealjoint |
| C-3 | Diverter knob kit |
| C-4 | Trim cap (C- 3 included) |
| C-5 | Allen screw (C- 3 included) |
| D | Bathtub spout |
important
We recommends using a professional plumber for all installation and repair.
Please inform yourself about the Canadian plumbing code`s regulations and your
local municipality plumbing codes before installation. the Canadian plumbing
code requires the installation of urge arresting devices to eliminate water
hammering. allow an adequate opening in order to easily access connections or
other plumbing devices for maintenance or repair.
RECOMMENDED TOOLS
- Apply plumber’s putty under the plastic cover deck plcta to seal your installation.
The model shown in the installation steps may differ from the one in box however connection type and installation steps are the same.