VISUAL COMFORT CS 3631 Smith Medium Table Lamp Instruction Manual
- June 12, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT CS 3631 Smith Medium Table Lamp
Product Information
-
Product Name: Smith Medium Table Lamp
-
Item Number: CS 3631
Package Contents
- A – Finial (packaged separately)
- B – Shade (not included)
- C – Harp
- D – Saddle
- E – Protective Cover for Plug
Notice: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect the item and its contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
Product Usage Instructions
Tools Required (Not Included): Scissors
- Carefully remove all parts from the box. Place them on a clean, soft surface.
- Install the harp (C) by squeezing it together and inserting it into the top of the saddle (D).
- Remove the finial (A) from the harp (C).
- Remove the shade (B) from its packaging and install it to the harp (C) using the finial (A). If the shade has additional packaging, carefully cut it off from the interior of the shade to avoid any damages.
- Install the light bulb into the socket.
- Remove the protective cover (E) from the plug.
- Plug the lamp into an electrical outlet and test the fixture.
-
Care Instructions: Clean the lamp only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
-
Product Certification: UL Listed (US)
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED)
- Scissors
ASSEMBLY INSTRUCTIONS
- Carefully remove all parts from the box. Place on a clean, soft surface.
- Install harp (C) by squeezing together and inserting into the top of saddle (D).
- Remove finial (A) from harp (C).
- Remove shade (B) from packaging and install to harp (C) using finial (A).
- NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages.
- Install light bulb into the socket.
- Remove protective cover (E) from plug.
- Plug into electrical outlet and test the fixture.
- Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.