VISUAL COMFORT S 2010 Candlestick Swing Arm Wall Light Instruction Manual
- June 12, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT S 2010 Candlestick Swing Arm Wall Light
ASSEMBLY INSTRUCTIONS
NOTICE
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect item and contents
carefully. If any damage or defect is found, do not install. Retain all
packaging material until installation is complete and approved.
- Carefully remove all parts from the box.
- Remove the mounting plate (B) from fixture body (D) by loosening side screws (E).
- Drill 2 holes on the wall and make sure the hole distance will match to the mounting plate (B) holes.
- Knock the anchors (A) into the wall holes.
- Affix mounting plate (B) onto the wall and secure with mounting screws (C).
- Attach the fixture body (D) onto a mounting plate (B) and secure with side screws (E).
- Thread the cord cover (J) to the bottom of fixture body (D).
- Attach the harp (H) to the saddle (I).
- Place shade (G) to the top of harp (H) and secure with finial (F).
- Insert bulb (not included) into the socket.
- Remove protective plug cover (K) from the plug.
- Plug into a proper electrical outlet and test the fixture.
- Installation is complete, turn on power at fuse or circuit breaker.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>