VISUAL COMFORT S 2406 Cranston Large Sconce Instruction Manual
- June 12, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT S 2406 Cranston Large Sconce
Product Information
- Product Name: Cranston Large Sconce
- Item Number: S 2406
- Usage: Light fixture
Installation: Should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Product Usage Instructions
- Carefully remove all parts from the box.
- Remove the mounting plate (B) from the backplate (E) by loosening the side screws (D).
- Affix mounting plate (B) to the outlet box and secure it with mounting screws (C).
- Drill a hole in the wall and make sure the distance will match the fixture exactly.
- Attach anchor (L) onto the wall hole.
- Install the screw (K) into the anchor (L).
- Connect the hot wire (BLACK) from the fixture to the hot wire from the electrical supply.
- Connect the neutral wire (WHITE) from the fixture to the neutral wire from the electrical supply.
- Securely tighten all wire connections using wire nuts.
- Attach backplate (E) to the mounting plate (B) using the side screws (D).
- Place shade (H) onto the harp (F) and secure with a finial (I).
- Installation is complete, turn on the power at the fuse or circuit breaker.
Cranston Large Sconce
- Item # S 2406
NOTICE
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect items and contents carefully. If any damage or defect is found, do not install it. Retain all packaging material until installation is complete and approved.
ASSEMBLY INSTRUCTIONS
-
Carefully remove all parts from the box.
-
Remove the mounting plate (B) from the backplate (E) by loosening the side screws (D).
-
Affix mounting plate (B) to the outlet box and secure it with mounting screws (C).
-
Drill a hole on the wall and make sure the distance will match the fixture exactly.
-
Attach anchor (L) onto the wall hole.
-
Install the screw (K) into the anchor (L).
-
Connect the hot wire (BLACK) from the fixture to the hot wire from the outlet box (usually BLACK). Fasten them together with a plastic wire connector (A) provided and wrap the connection with electrical tape.
-
Repeat this procedure for the neutral wire (WHITE) from the fixture to the neutral wire from the outlet box (usually WHITE).
DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY WILL BE COMPROMISED. -
Connect ground wire from the fixture (bare copper) to ground wire from the outlet box (usually green or copper in color).
IT IS IMPERATIVE THAT THIS FIXTURE BE GROUNDED. -
Hang the bottom plate (J) onto screw (K).
-
Attach the backplate (E) to the mounting plate (B) and secure it with side screws (D).
-
Put the harp (F) to the saddle.
-
Insert bulb (not included) into the socket.
-
Place shade (H) to the harp (F) and secure with a finial (I).
-
Installation is complete, turn on the power at the fuse or circuit breaker.
Cranston Large Sconce
- Item # S 2406
NOTICE
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect items and contents carefully. If any damage or defect is found, do not install it. Retain all packaging material until installation is complete and approved.
Care Instructions
- Clean only with a soft dry cloth or feather duster.
- Do not use abrasive or chemical agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>