CARRO R324G Remote Control Instructions
- June 12, 2024
- CARRO
Table of Contents
CARRO R324G Remote Control
Remote Control Instructions
Pair the Remote Control to Your Fan
Power on the fan and pair the remote to the fan within 1 min. To pair the remote to the fan, press and hold the button for 3-5 secs to pair. The successful pairing will trigger the fan light off.
Remote Control Button Definitions
- Turn the fan off.
- Switch between summer mode and winter mode.
- Summer mode – (Counter-clockwise)
- Winter mode – (Clockwise)
- Turn the fan on and decrease the fan speed.
- Turn the fan on and increase the fan speed.
- Switch the fan speed between nature mode and normal mode. Simulate a natural breeze, gentle enough not to disturb you while you sleep.
- Turn the light on or off and remote pair.
- Note: Power on the fan and pair the remote to the fan within 1 min. To pair the remote to the fan, press and hold the button for 3-5 secs to pair. The successful pairing will trigger the fan light off.
- Switch between warm light and cool light. WIFI Troubleshooting.
- Note: Press/hold the button for 5 sec. The fan will switch to AP Mode, then select AP Mode on APP, follow the APP control instructions, and enable fan Wi-Fi.
- Press/Hold the button to decrease the light intensity.
- Press/Hold to button to increase the light intensity.
- WARNING: Do not expose the remote control to direct contact with water.
FCC Statement
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>