JVC SP-SG2BT Portable Wireless Speaker User Manual

June 12, 2024
JVC

**JVC SP-SG2BT Portable Wireless Speaker User Manual

**

  • Product :SP-SG28T
  • Catagory: Bluetooth Audio Product
  • Notice: Please read user manual carefuly and keep it for your records,

Package includes:

  • 1-Bluetooth speaker
  • 1-USB Ato USB C cable

Specifications:

  • Bluetooth Version: 5.3
  • Housing: ABS ith rubber o +fabric
  • Speaker: 403N Battery: 600mAh
  • Function: Bluetooth, AU, caling,
  • TWS BT working distance: 10m
  • Operational Temperature :- 10- 40

Note
Above operations can b processed o Bluetooth devices synchronously

Safety Instructions

  • Never disassemble the Bluetooth Speaker in an attempt to make any repairs as this could result in electrical shock, burns or product failure
  • Use extra caution in high temperatures
  • Do not expose the device to direct heat or flame
  • Product is not covered under warranty when the product has metal rust, surface spoiling and any other natural oxidation
  • Damage, shock, and/or injury can occur if these warnings are not heeded
  • Device may become warm while charging
  • Make sure to always turn both the product and power outlet off completely before unplugging the speaker
  • Make sure the product has plenty of ventilation
  • Do not press the buttons too hard as it could damage the product
  • Only use dry cloth to keep product clean from dust
  • Do not use chemicals on this product
  • Never try to repair this product yourself, take it to a certified technician. Trying to remove panels or repairing the unit yourself could lead to electric shock. When the unit is not in use, make sure it is correctly turned off and stored in a cool dry place
  • Do not insert foreign objects into the product
  • Avoid dropping the product, as harsh impacts could damage the product.

Power On/Off and Pairing:

  1. Plea speaker within 30 eat of the Bluetooth enabled device

  2. Press and hold the ON/OFF button. The Blue LED ill lash rapidly to indicate that the speaker i in Bluetooth airing mode; You wellhead the prompt voice ” The Bluetooth deride s ready to pair™
    Note:

    • The speaker willpower o automatically not connected infer minutes after being powered o.
    • Low battery alert ill occur when battery voltage is owner than 3.3V, you will hear the “ding” voice prompt.
  3. 0n your Bluetooth enabled smartphone, tablet or media layer, navigate to the Bluetooth setting menu, turn-on the Bluetooth future ,and search for new deices

  4. You will ear the prompt voice ” The Bluetooth device is connected successfully” the blue indicators instantly on when connected. You can tart playing the music contour devices now. Blue indicator flashes slowly during playing or Bluetooth and aux me

Note:
The speaker will be automatically reconnected to the last pained Bluetooth device when powered on again.

Charging:

  • Connect the small end of the USB C charging cable (included) to the USB C port located under the silicon cover of the speaker. Connect the larger end of the cable to your computer’s USB port or an AC adaptor (not included)
  • The LED indicator will turn red while charging, and goes off when fully Charged

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

IC Warning
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present

The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
The device has been evaluated to meet general RF exposure requirement. le dispositive de a tee values a responder general rf exposition exigency.

CAN ICES-3 (B) / NMB-3 (B) This Class B digital apparatus complies with Canadian ICES-003. (Cat apparel numerique de la Classed B conformed a la normed NMB-003 du Canada)

For Customer Use: Enter the Model No. and Serial No. (on the rating label of unit) below. Retain this information for future reference. Model No. Serial No.

  • Supplier’s Declaration of Conformity

  • Model Number : SP-SG2BT
    Trade Name : JVC

  • Responsible party : JVCKENWOOD USA Corporation
    Address: 1440 Corporate: Drive, Irving, TX 75038

  • Telephone Number: (678)449-8879

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2AYBO-SPSG2BT IC: 282B-SPSG2BT

ATTNTION : The product you have purchased is powered by a rechargeble battery that is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery.

PRODUCT REGISTRATION FOR THE CUSTOMER IN CANADA

EN : https://myjvckenwood.ca 
FR : https://myjvckenwood.ca/fr

Support
JVCI S HERETO HELP!
TOLL FREE: 1(800)252-5722
http://www.usjvc.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals