WELLFOR WK0925 8 Inch Widespread Double-Handle Bathroom Faucet Instruction Manual
- June 12, 2024
- WELLFOR
Table of Contents
WK0925 8 Inch Widespread
Double-Handle Bathroom Faucet
Instruction Manual
PACKING LIST
| Serial Number | Part Name | Quantity |
|---|---|---|
| 1 | Faucet | 1 |
| 2 | Switch | 2 |
| 3 | Rubber gasket | 3 |
| 4 | Gasket | 3 |
| 5 | Lock nut with | 3 |
| 6 | water inlet hoses | 2 |
| 7 | Double-water inlet hoses | 2 |
INSTALLATION OF BASIN FAUCET
There are seven steps to installing a faucet:
- First,prepare the installation tool.Check whether the parte are complete before installation.Common faucet parts include:hose,rubber ring,etc.In addition,waterproof tape should be prepared.
- Check if the main valve of water supply is closed.
- Use a waterproof tape to wrap a few turns in the clockwise direction on the thread of the faucet.(This is very important.The direction of the waterproof tape must be tangled clockwise.lf twint revrsely,it will leak,which means that the direction of the waterproof tape winding is opposite to the direction of he faucet thread).
- Install the faucet following the graphic instruction below.
- Open the main valve of the water supply,normal water can be used.
- The thread size is 9/16,it’s meets the installation needs of most American house.
- Button is functional when water pressure is applied.
INSTALLATION STEPS
Connect the inlet hose to
the angle valve according to the hot and cold mark and tighten. Before
connecting, please confirm that there is a sealing rubber gasket in the inlet
hose connector
Care and Maintenance
In order to keep the mixer surface bright, please keep often or regularly to clean the mixer.
- Wash faucet with clean water, and wipe with soft cotton cloth.
- Avoid using cleaning powder, harsh cleaning chemicals, brushes, and cloth with coarse surface to prevent scratching and corrosion.
- Do not use acidic cleaning agents for washing the faucet as it may cause corrosion on the surface of faucet. Rinse off with water immediately if the faucet in contact with harmful acidic agents.
If must carry on the massive clearing, please obey the following procedure:
-
Use clear water and the soft cloth, eliminate the superficial dirt and the filthy membrane as far as possible;
-
Use the any following cleanser to remove the superficial dirt and the filthy membrane;
■ Temperate liquid cleanser.
■ The colorless glass cleaner, does not have the powdery cleanser which the abrasive action and can dissolve completely (according to instruction mix).
■ Polish liquid which does not abrasive action. -
After cleanly, please remove the complete cleansing agent with the clear water, and wipes with soft cotton fabric.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>