geemarc Amplicall 110 Wireless Telephone Signaler User Manual
- June 12, 2024
- geemarc
Table of Contents
geemarc Amplicall 110 Wireless Telephone Signaler
Product Information
The AC110 (AMPLICALLTM110) is a device designed to amplify the ringer and provide visual alerts when receiving a call. It can be paired with AMPLICALL receivers to extend the alert functionality. The device operates on two AA 1.5V alkaline batteries (not included) and can also be connected to the mains as a backup power source. It features an on/off slide button, volume control, external jack socket, bell button, telephone line input, 5V DC connector, and a battery compartment with a cover. The AC110 can be mounted on a wall or placed on a flat surface.
Please refer to our website: www.geemarc.com for an up-to-date user guide, as there may be important updates and changes you need to be aware of.
Product Usage Instructions
- Open the battery cover by unscrewing the screw and insert two AA 1.5V alkaline batteries into the battery compartment. Close the battery cover and secure it with the screw.
- If the device is running low on battery or no battery is inserted, the zone icon will light up to indicate a low battery signal.
- (Optional) Connect the type C USB power cable to the DC input connector if you want to use the device with mains power. Note that batteries must still be inserted as backup in case of a power failure.
- To pair the AC110 with AMPLICALL receivers:
- Press and hold the LEARNING button for 3 seconds until the LED in zone icon #1 flashes.
- Press the LEARNING button again to select the desired zone icon to pair with the AC110. Use the melody selection button to scroll through melodies and choose one by not pressing any button during that melody.
- Press the bell button on the AC110 once to initiate pairing.
- If successful, the AMPLICALL receivers will generate two short tones.
- To connect the AC110 to a phone socket:
- Connect one end of the supplied RJ11 cord to the phone socket and the other end to the Tel input connector on the AC110.
- Connect one end of your original phone cord to the Line input connector on the AC110 and the other end to your wall outlet.
- (Optional) If you want to mount the AC110 on a wall, mark two holes on the wall using a pencil and drill hole template. Use the provided anchors and screws to mount the unit securely.
- To charge the settings of your AC110:
- Use the on/off slide button to turn the device on or off. Slide it to the off position if no receiver is used.
- Adjust the volume of the ringer by sliding the volume button. You can choose between high, low, and silent modes.
- The AC110 is compatible with external devices such as fall mats and sensors. These can be connected to the device for additional functionality.
Box Contents
The AC110 (AMPLICALLTM110) box contains the following items:
- 1 user’s manual
- 1 AC110 (AMPLICALLTM110)
- 1 RJ11/RJ11 cable
- 2 screws and 2 anchors
- 2 x AA,1.5V Alkaline batteries
- 1 Drill hole template
DESCRIPTION
BATTERIES INSTALLATION
Your AMPLICALLTM110 works with two Alkaline AA 1.5V batteries (not provided).
Please follow the below procedure to insert the batteries.
- Unscrew the screw on the battery cover.
- Open the battery cover.
- Insert the 2 AA batteries into the compartment.
- Close the battery cover and fix it using the screw.
Low Battery
If your device is running low on battery or if no battery has been inserted,
your AMPLICALLTM110 will send a signal to the receiver which will make the
zone icon light up.
Connecting
Connecting your AC110 to the mains (Optional)
- Even if your AMPLICALLTM110 is plugged into the mains, you must insert batteries, otherwise your device will send a low battery signal to your receiver.
- Those batteries will however only work as backup batteries in the event of a power failure.
- Connect the type C USB power cable to the DC input connector.
Pairing your AC110 with the AMPLICALL receivers
The AC110 can work on its own, it will amplify the ringer and will flash
when you receive a call. You also have the possibility to register your
AMPLICALLTM110 with the AMPLICALL receivers. If paired, the receivers will
receive the information from the AMPLICALLTM110 and ring and flash as well.
Enter pairing mode for the AMPLICALL receivers.
- Press & hold the LEARNING button (●) for 3 seconds. The LED in zone icon #1 will flash
- Press the LEARNING button (●) again to move to the zone icon you wish to pair the AC110 with. Press the melody selection ( ) button to scroll through the melodies. Once you hear a melody you like, do not press any button during the melody.
- Press once the bell button of the AC110 to pair.
- If successful, the AMPLICALL receivers will generate two short tones.
Connecting your AC110 to a phone socket
- Connect one end of the supplied RJ11 cord to your phone socket and the other to the “Tel” input connector on your AC110
- Connect one end of your original phone cord to the “Line” input connector on your AC110 and the other to your wall outlet.
Wall mounting
The AC110 can either be placed on a flat surface or be mounted on a wall.
Mark two holes on the wall using a pencil and drill hole template. Mount the unit to the wall using the provided anchors and screws.
Charging the settings of your AC110
- On ( ) / Off ( ) slide button: Slide to the Off ( ) position when no receiver is used.
- Volume ( ): You can adjust the volume of the ringer by sliding this button, you can switch between the H (high), L (low), and X (silent) position.
Connecting an External Sensor to your AC110
The AC110 is compatible with external devices such as fall mats and other
types of sensors which can be connected to the AC110 using the “EXT” jack
socket. Once connected, the device will send a signal to the receiver every
time it is triggered.
GUARANTEE
From the moment your Geemarc AMPLICALLTM110 is purchased, Geemarc guarantee is
for the period of two years. During this time, all repairs or replacements (at
our discretion) are free of charge. Should you experience a problem then
contact our help line or visit our website at www.geemarc.com. The guarantee
does not cover accidents, negligence or breakages to any parts. The product
must not be tampered with or taken apart by anyone who is not an authorized
Geemarc representative. The Geemarc guarantee in no way limits your legal
rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE AND MUST BE RETAINED
AND PRODUCED IN THE EVENT OF A WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom only.
DECLARATIONS
UKCA Directives
Geemarc Telecom SA hereby declares that this AMPLICALLTM110 is in compliance
with the essential requirements and other relevant provisions of the Radio
Equipment Directive 2014/53/UE. The UKCA declaration of conformity may be
consulted at www.geemarc.com
RF power: < 250mW
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment) has been put in place for
the products at the end of their useful life are recycled in the best way.
When this product is finished with, please do not put it in your domestic
waste bin. Please use one of the following disposal options:
- Remove the batteries and deposit them in an appropriate WEEE skip. Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a new one, they should accept it. Thus if you respect these instructions you ensure human health and environmental protection.
For product support and help visit our website at
www.geemarc.com
E-mail: help@geemarc.com
telephone 01707 387602
lines are open 09h00 to 16h00 Mon to Fri
Parc de l’Etoile, 2 Rue Galilée, 59760 Grande-Synthe, France
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>