ingenuity Pock-a-Bye Baby Streaming Music Player and Soother User Manual

ingenuity Pock-a-Bye Baby Streaming Music Player and Soother

Product Information:

• Product Name: Pock-a-Bye
  BabyTM

• Manufacturer: ingenuitybaby.com

• Languages: English,
  Deutsche, Polski, Italiano

Product Usage Instructions

1. Care and Cleaning:
   • Follow the care and cleaning instructions provided in the user manual.
   • Do not submerge the product or expose it to fire, excessive heat, or other hazards.
   • Contact the local authority for recycling and collection information as the product contains batteries that can be damaging to the environment and health.
2. Battery Information:
   • Do not tamper with or replace the original battery with other parts.
   • Avoid exposing the battery to water or other liquids.
   • Refer to the user manual for more information on battery handling and disposal.
3. Description:
   • The package includes:
   • 1 Pock-a-Bye BabyTM device
   • 1 Type C USB cord
   • 1 Clip
4. Using the Pock-a-Bye BabyTM Soother Control Module:
   • Timer Control: Use this control to set the timer for the soother.
   • Power/Bluetooth Control: Use this control to turn on/off the power and connect to Bluetooth devices.
   • Indicator Light: The red LED status indicators indicate power, low battery, and charging status. The blue LED status indicators indicate pairing and Bluetooth connection status.
   • Strap Holder: Use this holder to secure the device.
   • Volume Up/Index Sound Genre Forward/Index Stream Forward: Use these controls to increase volume, change sound genres, and move forward in the streaming.
   • Sound Menu: Access the sound menu using this control.
   • Volume Down/Index Sound Genre Backwards/Index Stream Backwards: Use these controls to decrease volume, change sound genres, and move backward in the streaming.
   • USB-C Charging Port: Use this port to charge the device.

Note: For audio adjustment, remove the Pock-a-Bye BabyTM from the plush. Please refer to the user manual for detailed instructions and safety information in your preferred language.

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

WARNING
Always read safety and operation instructions before use. Retain instructions for later reference. STRANGULATION, SHOCK, FIRE, OR OTHER INJURY HAZARDS:

• Children have STRANGLED in cords. Keep the charging cable away from child.

• The charging cable (included) and wall adapter (not included) are NOT toys. NEVER allow child to play with charging cable or wall adapter.

• The Pock-a-Bye Baby™ is NOT a toy and must be securely attached inside the Snuggle Sounds™ Nally™ during play.

• NEVER allow child to play with Pock-a-Bye Baby™ while charging and/or connected to a power source.

• NEVER attach any additional strings or straps to the toy when attaching to the crib.

• ALWAYS use the straps provided to attach the crib toy to the baby crib.

• ALWAYS keep the bottom of the crib toy at least 7 inches (18 cm) above the surface of the mattress.

• DO NOT attach product to the crib while charging or attached to the charging cord. The charging cord should NEVER be near the crib.

• For children under 12 months, Snuggle Sounds™ Nally™ must be securely attached to the crib rail.
  DO NOT place Snuggle Sounds™ Nally™ on the mattress or allow child to sleep holding Snuggle Sounds™ Nally™.

• For children over 12 months, consult your pediatrician before allowing child to sleep with Snuggle Sounds™ Nally™. If your child does sleep with Snuggle Sounds™ Nally™, REMOVE the Pock-a-Bye Baby™ before giving to your child.

• Remove the Pock-a-Bye Baby™ from the Snuggle Sounds™ Nally™ before charging.

• DO NOT expose charging port, charging cable, or wall adapter to liquid.

• ALWAYS disconnect the power supply before cleaning.

• Check the charging cable and wall adapter regularly for damage. DO NOT use if any damage has occurred.

• DO NOT use extension cords.

• To avoid risk of electric shock, DO NOT touch the product or any wires connected to the product during a lightning storm.

• For the purpose of recharging the battery, ONLY use the charging cable supplied with this product.

• This product is only to be connected to equipment bearing either of the following symbols:

• ONLY use included charging cable with a 5 Volt/1 Amp (5 Watts) USB A wall adapter (NOT INCLUDED).

• DO NOT attempt to open or modify the electronic product in any way as it does not contain any serviceable parts.

• Do not expose Pock-a-Bye Baby™ to liquid, moisture or humidity.

IMPORTANT

• The provided USB cord is 1m (3.3 ft) in length.
• Please read all instructions before assembly and use of the product.
• Care should be taken in unpacking and assembly.
• Examine product frequently for damaged, missing, or loose parts.
• DO NOT use if any parts are missing, damaged, or broken.
• Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.

Battery Information

• Charge before first use.
• The product contains a rechargeable lithium-ion polymer battery.
• This product’s battery is NOT replaceable.
• DO NOT attempt to remove the battery.
• DO NOT dispose of product in fire, battery may explode of leak.
• Please use the correct disposal method for items that contain batteries.
• DO NOT store product in areas that have extreme temperatures (such as attics, garages, or automobiles).
• Avoid charging the device in direct sunlight.
• DO NOT puncture or attempt to insert objects into the battery, immerse the battery to water or other liquids, or expose the battery to fire, excessive heat, and/or other hazards.

This symbol indicates that the product is not to be disposed of in household waste as batteries contain substances that can be damaging to the environment and health. Contact local authority for recycling & collection information.

Care and Cleaning

• Pock-a-Bye Baby™ – Ensure product is not plugged in or connect to a power source. Wipe clean with a slightly damp cloth. Do not expose charging port to liquid. Air dry. Do not immerse in water.

• Snuggle Sounds™ Nally™ – Remove Pock-a-Bye Baby™ before cleaning.
  Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.

• Storage – Always store in a dry location, away from any heat sources, and out of the sun. Product should be stored between 23°F to 95°F (-5°C to 35°C).

Parts List and Drawing

1. (1) Pock-a-Bye Baby™
2. (1) Type C USB cord
3. (1) Clip

Charging the Device

Use USB cord only with a 5 Volt/1 Amp (5 Watts) USB A wall adaptor. (not included)

Computer connected

USB Adaptor(not included)

Take out Pock-a-Bye Baby™ from plush for audio control

USB CHARGING PORT: CHARGE UNIT BEFORE USE

• Remove Pock-a-Bye Baby™ from Snuggle Sounds™ Nally™ before charging.
• Connect the provided Type C USB plug to the Type C USB charging port on the side of the unit.
• Connect the provided USB A plug to a power USB A port on a computer or other USB/AC adapter. (5 Volt/1 Amp (5 Watts) USB A wall adapter) For first time use, charge unit for about 3 hours, or until is full charge.
• The Indicator Light glows red steadily while the unit is charging and turns OFF once the unit is fully charged.
  ***For best battery life and performance, charge the battery at least every three months.

BLUETOOTH PAIRING:
Pairing soother with device

• Press and hold the power button to turn Pock-a-Bye Baby™ ON.
• A blue light indicator will flash quickly indicating it is now in paring mode.
• Turn on your device’s Bluetooth mode (check in Options or Settings), locate and select “INGENUITY” in the Bluetooth menu to complete pairing.
• A tone will sound when pairing is completed.
  The blue light indication will flash if the Bluetooth connection is lost (out of range, about 30 feet).
  Pock-a-Bye Baby™ will turn off after 5 minutes without Bluetooth connection.

FULL CHARGED AND LOW BATTERY INDICATION:
When the battery charge is low, the LED indicator will blink red slowly and should be recharged immediately, while charging, red LED lights up steadily. When fully charged, the LED indicator will turn off. Charge time is approximately 3 hours.

TROUBLESHOOTING

Unit doesn’t respond (no power)

• * Make sure unit is completely charged.

• Make sure your device is properly paired with the Pock-a-Bye Baby™.

Unit doesn’t respond (locked up/ “frozen”)

• If the Pock-a-Bye Baby™ does not respond, PRESS and HOLD the power button for 8 seconds to reset the Pock-a-Bye Baby™.
• Trouble Pairing a device with Pock-a-Bye Baby™ Bluetooth implementation varies depending on your device’s hardware and operating system.
• When you power ON the speaker, it will automatically link with the last previously paired Bluetooth device if the device is still within range (approx. 30 feet). To pair with a different device you must turn off Bluetooth capability on the already paired device, or take it out of range.
• To do so, first delete INGENUITY from Settings / Bluetooth / My Devices and then re-pair Ingenuity from the Other Devices list.

PRODUCT SPECIFICATIONS

• Model Number: 12477/16729
• Power: USB A Power Adapter (NOT INCLUDED)
• Output: 5VDC/1A (5W)
• Input: 100-240 Vac, 50/60 Hz, 0.5A
• Connectivity: Bluetooth 5.1 +EDR
• FCC ID: RBZ-16729
• IC: 27249-16729
• Frequency: Frequency band(s) in which product operates: 2402- 2480 MHz Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates: <=6dBm Operating Temperature Range: 32°F to 95°F (0°C to 35°C),
• Storage Temperature Range: 23°F to 95°F (-5°C to 35°C)
• Charging Time: Approximately 3 hours
• Connection Range: Approximately 30 feet (9.2 meters)

• Hereby, Kids2, Inc., declares that the radio equipment type Pock-a-Bye Baby™ is in compliance with Directive 2014/53/EU. The declaration of conformity may be consulted at www.kids2.com/16729doc
• Hereby, Kids2, Inc., declares that the radio equipment type Pock-a-Bye Baby™ is in compliance with Radio Equipment Regulations 2017. The declaration of conformity may be consulted at www.kids2.com/16729doc

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3 (B) / NMB-3(B)
This device contains license/exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of this device.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>