Positioning Universal FJ1510LW GPS Tracker Owner’s Manual

Positioning Universal FJ1510LW GPS Tracker

Product Information

Specifications

• Cellular : LTE Cat-1
• LTE-FDD Bands: 2/4/5/12/13/14/25/26
• GNSS : GPS, GLONASS, Beidou & Galileo
• Tracking Sensitivity: -161 dBm
• Acquisition Sensitivity: -146 dBm
• Location Accuracy:

Product Usage Instructions

Installation

1. Locate a suitable location inside the vehicle for installing the FJ1510LW tracker.
2. Ensure that the vehicle’s main power supply is accessible at the chosen location.
3. Connect the FJ1510LW tracker to the main power supply using the provided cables.
4. Securely mount the FJ1510LW tracker in the chosen location using screws or adhesive.

Configuration
No programming skills are required for configuring the FJ1510LW tracker.

1. Download and install the easy-to-configure application software provided with the tracker.
2. Connect the FJ1510LW tracker to a computer using a USB cable.
3. Launch the application software and follow the on-screen instructions to configure the tracker.

Usage
The FJ1510LW tracker offers various features and functionalities for vehicle tracking and management. Here are some key usage instructions:

• Reports can be triggered periodically or in response to events such as motion, speeding, harsh acceleration and braking, geo-fence violations, and battery status.
• Notifications can be sent for vehicle towing, battery removal,  and more.
• The built-in 3-axis accelerometer enables motion detection and monitoring of driver behavior.
• An internal Lithium-Ion backup battery allows for continuous operation for up to 20 hours when the device is disconnected from the main power.
• An optional buzzer alert system is available inside the unit for driver warnings.

INSTRUCTIONS

The FJ1510LW tracker is a real-time vehicle tracking system designed for vehicle recovery, fleet management, and more.

IT’SRELIABLE
The ultra-thin yet durable FJ1510L is a high-performance cellular tracking device designed for vehicle financing, vehicle tracking, lot management, theft recovery, or other fleet applications. With an integrated GNSS receiver, the FJ1510LW includes an LTE Cat-1modem for wireless data communication. The bbuilt-in high-performance antennas for both cellular radio and GNSS receivers make installation easy.

IT’S SIMPLE
No programming skills are required; the FJ1510LW comes with easy-to-configure application software and an extended AT command set. Reports can be triggered periodically or in response to events such as motion, speeding, harsh acceleration and braking, geo-fence violations, and battery status. Notifications can be sent for vehicle towing, battery removal, and more.

IT’S FUNCTIONAL
The FJ1510LW interface supports the main power supply. uart, can, input/output. A built-in 3-axis accelerometer enables motion detection and monitoring of driver behavior. An internal Lithium-Ion backup battery allows for continuous operation for up to 20 hours when the device is disconnected from the main power. An optional buzzer alert system for driver warnings is available inside the unit.

The application firmware is flexible and can be customized to be compatible with your existing server at special request.

HIGHLIGHTS

• LTE Cat-1
• Integrated cellular and GNSS antenna
• ED status indicators for GNSS and network registration
• Integrated accelerometer for monitoring vehicle status &driver behavior
• 1/0 options for starter inhibit, ignition
• Rechargeable backup battery
• SMS, UDP, TCP, FTP & MQTT
• Up to 16 Geo-fences (polygon and circles)
• Over-the-air configuration and firmware update
• Extended AT Command set for flexible and easy configuration
• Small size and easy installation
• OPTIONAL FEATURES

CELLULAR

• LTE Cat-1,
• LTE-FDD Bands : 2/4/5/12/13/14/25/26
• Integrated high-performance antenna

GNSS

• GPS, GLONASS, Beidou& Galileo
• Tracking Sensitivity: -161 dBm
• Acquisition Sensitivity: -146 dBm
• Location Accuracy: <2.5CEP

BATTERY INFORMATION

• Type : Li-ION
• Capacity : 1100mAh @ 3.7V
• Battery Life : Up to 4hours @ hibernation mode, 1 report per hour. (depends on the LTE signal strength and how many reports per hour)

ENVIRONMENTAL

• Operation Temperature: -30°C to +75°C without Battery
• Operation Temperature: -20°C to +60°C With Battery
• Storage Temperature: -40°C to +85°C

ELECTRICAL

• Operating Voltage: 7V – 36V
• Over voltage protected
• Over current protected with resettable fuse
• Power Consumption:
  • GPS Acquisition : ~ 48mA @ 12V
  • GPS Tracking/Reporting: ~ 74mA @ 12V
  • Sleep mode : < 1mA @12V

PHYSICAL

• Dimensions : 93.0 x 51.0 x 15.3mm
• Internal Cellular and GPS Antennas
• Weight : ~80g

INTERFACE CONNECTORS

• Cable Harness : 12-pin built-in flat Cable
  • PWR, GND (*2)
  • 1/Os :input3 andoutput2 (*5)
  • UART(*2)
  • ADC_MAIN power(*1)

APPROVALS

• FCC 47
• PTCR B & Carrier Approved

Asiatelco Technologies Inc. (ATEL)
Asiatelco is the leading provider of wireless terminal products to its valued customers worldwide. Its innovative products and solutions are widely used for reliable broadband access, IoT/M2M applications, and voice communication with 4G LTE, 3G &2G wireless technologies. ATEL’s sales and marketing are globally positioned. It has become a globally well-known company in the wireless industry due to its excellent products, solutions, and services.For more information, contact Asiatelco Technologies Inc.

FCC Regulations

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF Exposure compliance requirements, this grant applies to only Mobile Configurations. The antennas used for the transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Warning statements

This device complies with Canada’s license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

FAQ’s

Can the FJ1510LW tracker be customized to work with my existing server?

Yes, the application firmware is flexible and can be customized to be compatible with your existing server upon special request.

How long does the backup battery last?

The internal Lithium Ion backup battery allows for continuous operation for up to 20 hours when the device is disconnected from the main power.

What events can trigger reports or notifications?

Reports and notifications can be triggered by events such as motion, speeding, harsh acceleration and braking, geofence violations, and battery status.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>