NOVASTAR T50 Multimedia Player Owner’s Manual

T50 Multimedia Player

“`html

Specifications

Brand: NovaStar

Model: T50 Multimedia Player

Release Date: July 24, 2024

Description

The T50 is a new generation multimedia player designed for
full-color LED displays. It integrates playback and sending
capabilities, allowing users to publish content and control LED
displays with ease. It supports multi-screen synchronous playback
and offers both synchronous and asynchronous modes for various
applications.

Features

• Supports loading capacity up to 1,300,000 pixels
• Maximum resolution: 4096 x 4096 pixels
• Customizable non-standard resolutions
• 2x Gigabit Ethernet ports
• 1x Stereo audio connector
• 1x HDMI 1.3 connector for video input

Usage Instructions

Connecting the T50 Multimedia Player

1. Connect the T50 to the LED display using appropriate
cables.

2. Connect the power supply to the T50.

3. Connect your source device to the HDMI input if needed.

Setting up the T50

1. Power on the T50 by pressing the power button.

2. Access the settings menu to configure network settings if
required.

3. Upload your content using the provided software or
platform.

Playing Content

1. Select the desired content from the playlist on the T50
interface.

2. Adjust any audio settings as needed.

3. Start playback by pressing the play button.

FAQ

Q: What certifications does the T50 Multimedia Player

have?

A: The T50 has MIC, FCC, IC, and CE
certifications.

Q: What is the maximum loading capacity of the T50?

A: The T50 supports loading capacity up to
1,300,000 pixels.

Q: Can I customize non-standard resolutions on the T50?

A: Yes, non-standard resolutions can be
customized in both asynchronous and synchronous modes.

“`

T50 Multimedia Player
Specifications

T50 Multimedia Player Specifications

Change History

Document Version Release Date

V1.3.0

2024-07-24

V1.2.0

2024-05-30

V1.1.5 V1.1.4 V1.1.3
V1.1.2 V1.1.1
V1.1.0 V1.0.1

2023-09-28 2023-06-14 2022-06-10
2022-03-15 2021-12-17
2021-11-03 2021-09-30

V1.0.0

2021-08-10

Description
Updated the feature description. Updated the RUN indicator description. Added the recommended supply power. Updated the packing information. Updated the media decoding specifications. Updated the introduction. Updated the feature description. Updated the connector description. Updated the media decoding specifications. Changed the description of the default Wi-Fi AP password. Changed the internal storage capacity from 16 GB to 32 GB.
Updated the connector descriptions.
Updated the certification information. Updated the indicator descriptions. Updated the accessory descriptions.
Updated the legends on the appearance pictures.
Updated the descriptions of the USB (Type B) port and Gigabit Ethernet port.
Added a note for the dimension drawings. Added the gross weight of the product.
Updated the product appearance pictures.
Added certification information. Updated the description of the playback performance. Updated the product pictures. Added net weight.
First release

Introduction

The T50 is a new generation of multimedia player created by NovaStar for full- color LED displays. This multimedia player integrates playback and sending capabilities, allowing users to publish content and control

www.novastar.tech

1

T50 Multimedia Player Specifications

LED displays with a computer, mobile phone, or tablet. Working with our superior cloud-based publishing and monitoring platforms, the T50 enables users to manage LED displays from an Internet-connected device anywhere, anytime.
Support for multi-screen synchronous playback and synchronous and asynchronous modes makes this multimedia player a perfect fit for a wide range of applications.
Thanks to its reliability, ease of use, and intelligent control, the T50 becomes a winning choice for commercial LED displays and smart city applications such as fixed displays, lamp-post displays, chain store displays, advertisement players, retail store displays, door head displays, shelf displays, and much more.

Certifications
MIC, FCC, IC, CE If the product does not have the relevant certifications required by the countries or regions where it is to be sold, please contact NovaStar to confirm or address the problem. Otherwise, the customer shall be responsible for the legal risks caused or NovaStar has the right to claim compensation.

Features

Output

Loading capacity up to 1,300,000 pixels – Maximum width: 4096 pixels Maximum height: 4096 pixels – Non-standard resolutions can be customized in both asynchronous and synchronous modes and the pixel clock of the custom resolutions cannot exceed 153 MHz.
2x Gigabit Ethernet ports
These two ports serve as primary by default. Users can also set one as primary and the other as backup. 1x Stereo audio connector
The audio sample rate is fixed at 48 kHz. If NovaStar’s multifunction card is used for audio output, audio with a sample rate of 48 kHz is required. 1x HDMI 1.3 connector – Maximum output: 1920×1200@60Hz – Support for HDMI loop
Input

1x HDMI 1.3 connector In synchronous mode, the video source input from this connector can be scaled to fit the entire screen automatically.
2x Sensor connectors Connect to brightness sensors or temperature and humidity sensors.

www.novastar.tech

2

T50 Multimedia Player Specifications

Control
1x USB 3.0 (Type A) port Allows for USB playback, firmware upgrade and storage expansion.
1x USB (Type B) port Connects to the control computer for content publishing and screen control.
1x Gigabit Ethernet port Connects to the control computer, a LAN or public network for content publishing and screen control.
Performance
Powerful processing capacity – Quad-core ARM A55 processor @1.8 GHz – Support for H.264/H.265 4K@60Hz video decoding – 1 GB of onboard RAM – 32 GB of internal storage
Flawless playback Support for playback of 1x 4K, 2x 1080p, 4x 720p, 4x 480p, or 6x 360p videos
Functionality
All-round control plans – Enables users to publish content and control screens from a computer, mobile phone, or tablet. – Allows users to publish content and control screens from anywhere, anytime. – Allows users to monitor screens from anywhere, anytime.
Switching between Wi-Fi AP and Wi-Fi STA – In Wi-Fi AP mode, the user terminal is connected to the built-in Wi-Fi hotspot of the T50. The default SSID is “AP+Last 8 digits of SN” and the default password is printed on the SSID label of the product. – In Wi-Fi STA mode, the user terminal and the T50 are connected to the Wi-Fi hotspot of a router.
Synchronous and asynchronous modes – In asynchronous mode, the internal video source works. – In synchronous mode, the video source input from the HDMI connector works.
Synchronous playback across multiple screens Enabling synchronous playback halves the number of videos that can be played simultaneously within the decoding capability of the device. – NTP time synchronization – GPS time synchronization (The specified 4G module must be installed.) – RF time synchronization (The specified RF module must be installed.)
Support for 4G/5G modules

www.novastar.tech

3

T50 Multimedia Player Specifications
The T50 ships without a 4G/5G module. Users have to purchase 4G/5G modules separately if needed. Network connection priority: Wired network > Wi-Fi network > 4G/5G network (This order of priority is followed when the firmware is earlier than V4.5.0. The networks coexist when the firmware is V4.5.0 or later.) Support for relays (maximum DC 30 V, 3 A)
Appearance

All product pictures shown in this document are for illustration purpose only. Actual product may vary.

Name
SWITCH
USB 2 SIM CARD
RESET 2 RESET 1
RS232 USB 1
LED OUT

Description
Switches between synchronous and asynchronous modes Staying on: Synchronous mode Off: Asynchronous mode USB port (to be available in future updates) SIM card slot Capable of preventing users from inserting a SIM card in the wrong orientation. Reset connector used to reset the product to its factory settings Reset button Press and hold this button for 5 seconds to reset the product to its factory settings. External expansion connector USB (Type B) port Connects to the control computer for content publishing and screen control. Gigabit Ethernet outputs

www.novastar.tech

4

T50 Multimedia Player Specifications

Name
RS485 RF HDMI OUT
HDMI IN
WiFi

Description
Sensor connectors Connect to brightness sensors or temperature and humidity sensors.
RF module connector
1x HDMI 1.3 OUT Support for HDMI loop Maximum output resolution: The pixel clock cannot exceed 153 MHz. Maximum output: 1920×1200@60Hz HDCP 1.4 compliant No support for interlaced signal output In asynchronous mode, output resolutions support 400×4096@60Hz and
480×4096@60Hz. Support for custom resolutions:
– Custom pixel width range: 512~4096 (512×512@60Hz~4096×560@60Hz) – Custom pixel height range: 512~3680 (512×512@60Hz~512×3680@60Hz)
1x HDMI 1.3 IN Maximum input resolution: The pixel clock cannot exceed 153 MHz. Maximum input: 1920×1200@60Hz HDCP 1.4 compliant No support for interlaced signal input Support for custom resolutions:
– Custom pixel width range: 512~4096 (512×512@60Hz~4096×560@60Hz) – Custom pixel height range: 512~3680 (512×512@60Hz~512×3680@60Hz) Note: The resolution of HDMI IN can be customized by changing the preset EDID, so the external source must support custom resolutions. In synchronous mode, HDMI is used for video input and users can enable full-screen scaling to make the image to fit the screen automatically. Requirements for full-screen scaling in synchronous mode: – 512 pixels video source width 2048 pixels – 512 pixels video source height 2048 pixels – Maximum resolution: 1920×1080 – The image can only be scaled down and cannot be scaled up.
Note: The pixel width and height of the video source must be greater than or equal to the pixel width and height of the screen, respectively.
Wi-Fi antenna connector (2.4 GHz Wi-Fi supported)

www.novastar.tech

5

Name
ETHERNET
COM 2 USB 3.0
COM 1 AUDIO OUT POWER RELAY

T50 Multimedia Player Specifications
Description
Support for switching between Wi-Fi AP and Wi-Fi Sta
Gigabit Ethernet port Connects to the control computer, a LAN or public network for content publishing and screen control.
GPS antenna connector
USB 3.0 (Type A) port Allows for USB playback, firmware upgrade and storage expansion. The Ext4 and FAT32 file systems are supported. The maximum size of a single file supported by FAT32 is 4 GB. The exFAT and FAT16 file systems are not supported
4G antenna connector
Audio output connector OMTP headphones can be connected.
Power input connector
3-pin relay control switch DC: Maximum voltage and current: 30 V, 3 A AC: Maximum voltage and current: 250 V, 3 A Two connection methods: Common switch: The connection method of pins 2 and 3 is not fixed. Pin 1 is not
connected to the wire. On the power control page of ViPlex Express, turn on the circuit to connect pin 2 to pin 3, and turn off the circuit to disconnect pin 2 from pin 3. Single pole double throw switch: The connection method is fixed. Connect pin 2 to the pole. Connect pin 1 to the turn-off wire and pin 3 to turn-on wire. On the power control page of ViPlex Express, turn on the circuit to connect pin 2 to pin 3 and disconnect pin 1 form pin 2, or turn off the circuit to disconnect pin 3 from pin 2 and connect pin 2 to pin 1. Note: The T50 uses DC power supply. Using the relay to directly control AC is not recommended. If it is required to control AC, the following connection method is recommended.

www.novastar.tech

6

Name

Description

T50 Multimedia Player Specifications

4G

4G module slot

Indicators

Name
PWR

Color
Red

SYS

Green

CLOUD Green

RUN

Green

Status
Staying on

Description
The power supply is working properly.

Flashing once every 2s

The operating system is functioning normally.

Staying on/off

The operating system is malfunctioning.

Staying on

The T50 is connected to the Internet and the connection is available.

Flashing once every 2s

The T50 is connected to VNNOX and the connection is available.

Flashing once every second The T50 is upgrading the operating system.

Flashing once every 0.5s

The T50 is copying the upgrade package.

Flashing once every 2s

The FPGA has no video source.

Flashing once every 0.5s

The FPGA is functioning normally.

Staying on/off

The FPGA loading is abnormal.

www.novastar.tech

7

Dimensions

T50 Multimedia Player Specifications

Tolerance: ±0.3 Unit: mm To make molds or trepan mounting holes, please contact NovaStar for a higher-precision structural drawing.

Specifications

Electrical Parameters Input voltage

DC 5 V~12 V

Maximum power consumption 18 W

Storage Capacity

Recommended supply power 25 W

RAM

1 GB

Internal storage

Operating Environment

Temperature Humidity

Storage Environment Temperature

32 GB ­20ºC to +60ºC 0% RH to 80% RH, non-condensing ­40°C to +80°C

Humidity
Physical Specifications Dimensions

0% RH to 80% RH, non-condensing 165.0 mm × 146.4 mm × 21.2 mm

Net weight

184.5 g

www.novastar.tech

8

T50 Multimedia Player Specifications

Gross weight

374.0 g
Note: It is the total weight of the product, accessories and packing materials packed according to the packing specifications.

Packing Information Dimensions

278.0 mm × 63.0 mm × 221.0 mm

System Software

Accessories

1x Wi-Fi omnidirectional antenna 1x Power connector 2x IPex cables 1x Quick Start Guide 1x Certificate of Approval

Android 11.0 operating system software Android terminal application software FPGA program Note: Third-party applications are not supported.

The amount of power consumption may vary depending on various factors such as product settings, usage, and environment.

Media Decoding Specifications
Image

Codec

Max Resolution

JFIF file format 1.02 4096×2160 pixels

BMP GIF PNG WEBP

4096×2160 pixels 4096×2160 pixels 4096×2160 pixels 4096×2160 pixels

Format
JPG, JPEG

Remarks
No support for non-interlaced scan Support for SRGB JPEG Support for Adobe RGB JPEG

BMP

N/A

GIF

N/A

PNG

N/A

WEBP

N/A

www.novastar.tech

9

T50 Multimedia Player Specifications

Video

Codec
MPEG-1/2

Resolution

Max Frame Max Bit Rate Format

Rate

(Ideal Case)

Remarks

48×48 pixels to 30fps 1920×1088 pixels

80Mbps

DAT, MPG, VOB, TS

Support for field coding

MPEG4

48×48 pixels to 30fps 1920×1088 pixels

38.4Mbps

AVI, MKV, MP4, MOV, 3GP

No support for MS MPEG4 v1/v2/v3, GMC

H.264

16×16 pixels to 2304p@30fps 80Mbps 4096×2304 pixels

AVI, MKV, MP4, MOV, 3GP, TS, FLV

Support for field coding, MBAFF and High & High 10 Profile

H.264 MVC

16×16 pixels to 2304p@30fps 100Mbps 4096×2304 pixels

MKV, TS

Support for Stereo High Profile only

H.265/HEVC 64×64 pixels to 2304p@60fps 100Mbps 4096×2304 pixels

MKV, MP4, MOV, TS

Support for Main & Main 10 Profile and Tile & Slice

VP8

48×48 pixels to 30fps

38.4Mbps

WEBM, MKV

N/A

1920×1088 pixels

VP9

64×64 pixels to 60fps

80Mbps

WEBM, MKV

N/A

4096×2304 pixels

H.263

SQCIF (128×96) QCIF (176×144) CIF (352×288) 4CIF (704×576)

30fps

38.4Mbps

3GP, MOV, MP4

No support for H.263+

MJPEG

48×48 pixels to 60fps

60Mbps

AVI

N/A

1920×1088 pixels

Notes and Cautions
FCC Caution
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

www.novastar.tech

10

T50 Multimedia Player Specifications

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient of relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Important Note:

Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/Canada. The antenna must be installed such that 20 cm is maintained between the antenna and users, and The transmitter module may not be co-located with any other transmitter or antenna. As long as the three conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed.

Important Note:
In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.

End Product Labeling: The final end product must be labeled in a visible area with the following “Contains FCC ID:2AG8JT60” If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following; Contains Transmitter Module FCC ID: 2AG8JT60.

www.novastar.tech

11

T50 Multimedia Player Specifications

Manual Information to the End User: The OEM integrator has to be aware not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. When the module is installed inside another device, the user manual of this device must contain below warning statements; This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
– This device may not cause harmful interference, – This device must accept any interference received, including interference that may cause undesired
operation. Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment. The devices must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product.
ISED Statement
English: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). French: Le présentappareilestconforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitationestautorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d’encompromettre le fonctionnement. This radio transmitter (ISED certification number: 23873-T60) has been approved by Industry Canada to operate with the antenna types listed with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (ISED certification number: 23873-T60) a été approuvé par Industrie Canada pour fonctionner avec les types d’antenne énumérés ci- dessous et ayant un gain admissible maximal. Les types d’antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l’exploitation de l’émetteur.

Radiation Exposure Statement This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d’exposition aux radiations Cet équipement est conforme Canada limites d’exposition aux radiations dans un environnement non contrôlé. Cet équipement doit être installé et utilisé à distance minimum de 20cm entre le radiateur et votre corps.

This device is intended only for OEM integrators under the following condition:

www.novastar.tech

12

T50 Multimedia Player Specifications

The transmitter module may not be co-located with any other transmitter or antenna.
As long as the condition above is met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne. Tant que les 1 condition ci-dessus sont remplies, des essais supplémentaires sur l’émetteur ne seront pas nécessaires. Toutefois, l’intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé.

Important Note: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. Note Importante: Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d’ordinateur portable ou de certaines co-localisation avec un autre émetteur), l’autorisation du Canada n’est plus considéré comme valide et l’ IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l’intégrateur OEM sera chargé de réévaluer le produit final (y compris l’émetteur) et l’obtention d’une autorisation distincte au Canada. End Product Labeling The final end product must be labeled in a visible area with the following: Contains IC: 23873-T60. Plaque signalétique du produit final Le produit final doit être étiqueté dans un endroit visible avec l’inscription suivante: Contient des IC: 23873-T60

Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d’information à l’utilisateur final L’intégrateur OEM doit être conscient de ne pas fournir des informations à l’utilisateur final quant à la façon d’installer ou de supprimer ce module RF dans le manuel de l’utilisateur du produit final qui intègre ce module. Le manuel de l’utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqué dans ce manuel.

Radiation Exposure Statement This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cetéquipementestconforme Canada limitesd’exposition aux radiations dans un environnement non contrôlé. Cetéquipementdoitêtreinstallé et utilisé à distance minimum de 20cm entre le radiateur et votre corps.

www.novastar.tech

13

T50 Multimedia Player Specifications

Integration Instructions for Host Product Manufacturers According to KDB 996369 D03
OEM Manual v01
List of applicable FCC rules FCC Part 15 Subpart C 15.247 & 15.209
Specific operational use conditions The module is a 2.4G WiFi module. Operation Frequency: 2412-2462MHz Number of Channel: 11 Modulation: DSSS, OFDM Type: Helix Antenna Gain: 5.03 dBi Max. The module can be used for mobile or portable applications with a maximum 5.03dBi antenna. The host manufacturer installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation. The host manufacturer has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.
Limited module procedures Not applicable. The module is a Single module and complies with the requirement of FCC Part 15.212.
Trace antenna designs Not applicable. The module has its own antenna, and doesn’t need a host’s printed board micro strip trace antenna etc.
RF exposure considerations The module must be installed in the host equipment such that at least 20cm is maintained between the antenna and users’ body; and if RF exposure statement or module layout is changed, then the host product manufacturer required to take responsibility of the module through a change in FCC ID or new application. The FCC ID of the module cannot be used on the final product. In these circumstances, the host manufacturer will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
Antennas Antenna Specification are as follows: Type: Helix Antenna Gain: 5.03 dBi This device is intended only for host manufacturers under the following conditions: The transmitter module may not be co-located with any other transmitter or antenna; the module shall be only used with the

www.novastar.tech

14

T50 Multimedia Player Specifications
internal antenna(s) that has been originally tested and certified with this module. The antenna must be either permanently attached or employ a `unique’ antenna coupler.
As long as the conditions above are met, further transmitter test will not be required. However, the host manufacturer is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). Label and compliance information
Host product manufacturers need to provide a physical or e-label stating “Contains FCC ID: 2AG8JT60” with their finished product. Information on test modes and additional testing requirements
Operation Frequency: 2412-2462MHz
Number of Channel: 11
Modulation: DSSS, OFDM
Host manufacturer must perform test of radiated & conducted emission and spurious emission, etc. according to the actual test modes for a stand-alone modular transmitter in a host, as well as for multiple simultaneously transmitting modules or other transmitters in a host product. Only when all the test results of test modes comply with FCC requirements, then the end product can be sold legally. 2.10 Additional testing, Part 15 Subpart B disclaimer. The modular transmitter is only FCC authorized for FCC Part 15 Subpart C 15.247 & 15.209 and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. If the grantee markets their product as being Part 15 Subpart B compliant (when it also contains unintentional-radiator digital circuity), then the grantee shall provide a notice stating that the final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed.

www.novastar.tech

15

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>