Hellweg 916105 Series Scaffold Instruction Manual
- June 12, 2024
- Hellweg
Table of Contents
Hellweg 916105 Series Scaffold
Product Information
- Product Name: 916105 Series Scaffold
- Maximum Length: Approximately 5.00 m
- Available Variants: A, B, A+B
- Art.-No. 916105, Art.-No. 950009
- Art.-No. 916112, Art.-No. 950016
- Art.-No. 916129, Art.-No. 950023
- Weight Capacity: > 135 kg
- Minimum Height: > 2.00 m
Product Usage Instructions
- Assemble Package A by following the provided instructions.
- Assemble Package B by following the provided instructions.
- If using both Package A and Package B, use two stabilizing sets for stability.
- Ensure that the stabilizing sets are installed below the top platform.
- To fix the stabilizing sets to the wall, use 12 mm diameter eyebolts.
- Select appropriate dowels based on the wall structure.
- Maintain and service the product as per the provided guidelines.
Note: For further assistance or information, please contact the manufacturer, KRAUSE-Werk GmbH & Co. KG.
What In The Box
Parts: A
Parts: B
Not included in the scope of delivery
Dimensions
Dimension Of A+B
Assembly Package A
Assembly Package A+B
- Not included in the scope of delivery.
Anchorage of the scaffold at a wall
- Starting with package A, the scaffold must be fastened to the wall using one stabilizing set when in use as wall scaffold. When using package A+B with two wall clearance anchors.
- While using the stabilizing sets it is important to ensure that they are always installed below the top platform.
- To fix the stabilizing sets in the wall, 12 mm diameter eyebolts must be used. Selection of appropriate dowels depends on the wall structure.
Warning
Maintenance and servicing
- Prior to assembly of the scaffold all parts must be checked for possible damage and damaged parts must be replaced. Original spare parts may be used only.
- All welding seams and other materials must undergo a visual magnaflux inspection. Further, the scaffold components must not be deformed or crushed. Flawless functionality of construction components such as jaws, mandrels, wheels etc. must be ensured.
- The parts must be thrown to avoid damage.
- The scaffold components must be stored in such a way that they cannot be damaged.
- The individual parts must be stored laying and sheltered from the weather.
- During the transport, the construction components must be secured against damage inflicted by slipping, bumping, falling etc.
- For cleaning of scaffold components use water and customary cleansing agents. Colour stains can be removed by using turpentine.
- The assembly scaffold must be anchored and secured against unauthorized use after the end of work.
- Extras, accessories, assembly aids etc. are not included in the scope of delivery.
- No liability for improper use.
Contact
Hersteller/Manufacturer
- KRAUSE-Werk GmbH & Co. KG
- Am Kreuzweg 3 D-36304 Alsfeld
- Tel.: +49 (0) 6631 795-0
- Fax: +49 (0) 6631 795-139
- www.krause-systems.com
560823 © 2023 by ILN40091990 00 00 2.
Printed in Germany. We reserve the right to make technical changes and do not accept any liability for printing errors and mistakes.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>